[In-Situ Analysis of Solid Steel Samples with Remote Double-Pulse Laser-Induced Breakdown Spectroscopy System].

In order to realize real-time, online monitoring of the component of steel and other metal smelting process, we designed a remote double-pulse laser-induced breakdown spectroscopy (LIBS) analysis system which can realize non-contact remote measurement and component analysis for long distance sample. The paper first tests the system on solid standard steel samples, which provides basis for online monitoring the component of molten steel. The experimental results show：laser focal spot is about 1mm in long distance; double-pulse ablation depth is deeper than single pulse’s; the optimum delay of double-pulse is non-consistent in different distances; the enhancement effect of double- pulse in 3.

[Quantitative analysis of alloy steel based on laser induced breakdown spectroscopy with partial least squares method].

In the present paper both the partial least squares (PLS) method and the calibration curve (CC) method are used to quantitatively analyze the laser induced breakdown spectroscopy data obtained from the standard alloy steel samples. Both the major and trace elements were quantitatively analyzed. By comparing the results of two different calibration methods some useful results were obtained: for major elements, the PLS method is better than the CC method in quantitative analysis; more importantly, for the trace elements, the CC method can not give the quantitative results due to the extremely weak characteristic spectral lines, but the PLS method still has a good ability of quantitative analysis.

[Research on the analytical line auto-selection for quantitative analysis of materials with laser-induced breakdown spectroscopy].

To realize auto-selection of analytical lines for quantitative analysis of materials with laser-induced breakdown spectroscopy, two parameters, i. e. the relative detected-to-theory intensity ratio (RDTIR) and wavelength difference of detected and theory (WDDT) were defined.

[Quantitative analysis of Mn and Si of alloy steels by laser-induced breakdown spectroscopy].

The concentration of Mn and Si in different kinds of steels was determined by laser-induced breakdown spectroscopy (LIBS). The multivariate quadratic nonlinear function was adopted for calibration. Samples including common alloy steels, stainless steels and carbon tool steels were analyzed.