Silk fibroin catheter with stable bioinspired inner-surfaces for inhibition of bioadhesion.

Biofilm formation on indwelling medical devices such as catheters and ventilators due to the adhesion of bacteria poses significant challenges in healthcare. Surface modification with micro- and nano-structures offers a promising strategy to prevent bioadhesion and is safer than surface chemical modification approaches. Here, catheters were prepared using silk fibroin (SF) hydrogels and an infusion molding method, with the inner surface featuring a micropapillae structure inspired by lotus leaves (SF-CMP).

Mechanical biomimetic silk nano fiber-magnesium ion complex/hydroxyethylcellulose/glycerol hydrogel dressing with angiogenic capacity for accelerating scarless diabetic wound healing.

Quick scarless healing remains a key issue for diabetic wounds. Here, a stretchable elastomeric hydrogel dressing composed of hydroxyethylcellulose (HEC), silk nano fiber-magnesium ion complex (Mg-SNF) and glycerol (Gly) was developed to optimize mechanical niche, anti-inflammatory and angiogenic behavior simultaneously. The composite hydrogel dressing exhibited skin-like elasticity (175.

Recent advances in harnessing biological macromolecules for wound management: A review.

Wound dressings (WDs) are an essential component of wound management and serve as an artificial barrier to isolate the injured site from the external environment, thereby helping to prevent exogenous infections and supporting healing. However, maintaining a moist wound environment, providing protection from infection, good biocompatibility, and allowing for gas exchange, remain a challenge in device design. Functional wound dressings (FWDs) prepared from hybrid biological macromolecule-based materials can enhance efficacy of these systems for skin wound management.

Antistricture Ureteral Stents with a Braided Composite Structure and Surface Modification with Antistenosis Drugs.

The present work describes the development of a drug-loaded ureteral stent with antistricture function based on a trilayer design in which the middle layer was braided from biodegradable poly(-dioxanone) (PDO) monofilament. Antistenosis drugs rapamycin and paclitaxel were loaded into a silk fibroin (SF) solution and coated on the inner and outer layers of the braided PDO stent. The cumulative release of rapamycin and paclitaxel was sustained over 30 days, with a total release above 80%.

Silk Fibroin/Wool Keratin Composite Scaffold with Hierarchical Fibrous and Porous Structure.

The present study describes a silk microfiber reinforced meniscus scaffold (SMRMS) with hierarchical fibrous and porous structure made from silk fibroin (SF) and wool keratin (WK) using electrospinning and freeze-drying technology. This study focuses on the morphology, secondary structure, mechanical properties, and water absorption properties of the scaffold. The cytotoxicity and biocompatibility of SMRMS are assessed in vivo and in vitro.

Stabilization and Sustained Release of Fragrances Using Silk-PEG Microspheres.

Fragrances, which are commonly used in food, textiles, consumer products, and medical supplies, are volatile compounds that require stabilization and controlled release due to their sensitivity to environmental conditions such as light, oxygen, temperature, and humidity. Encapsulation in various material matrices is a desired technique for these purposes, and there is a growing interest in using sustainable natural materials to reduce environmental impact. In this study, fragrance encapsulation in microspheres made from silk fibroin (SF) was investigated.

Promotion of Wound Healing Using Nanoporous Silk Fibroin Sponges.

Wound dressings are important for wound repair. The morphology of the biomaterials used in these dressings, and in particular, the pore structure affects tissue regeneration by facilitating attachment and proliferation of cells due to the hierarchical multiscale, water absorbance, and nutrient transport. In the present study, silk fibroin (SF) sponges with walls containing nanopores (SFNS) were prepared from SF nanoparticles generated during the autoclaving of SF solutions, followed by leaching the SF nanoparticles from the freeze-dried sponges of SF.

1000 spider silkomes: Linking sequences to silk physical properties.

Spider silks are among the toughest known materials and thus provide models for renewable, biodegradable, and sustainable biopolymers. However, the entirety of their diversity still remains elusive, and silks that exceed the performance limits of industrial fibers are constantly being found. We obtained transcriptome assemblies from 1098 species of spiders to comprehensively catalog silk gene sequences and measured the mechanical, thermal, structural, and hydration properties of the dragline silks of 446 species.

Preparation and mechanical optimization of a two-layer silk/magnesium wires braided porous artificial nerve guidance conduit.

Peripheral nerve injures have long been a tricky problem in surgery and a feasible treatment is the transplantation of nerve guidance conduits (NGCs). This study presents a two-layer composite NGC with fair mechanical properties and good biocompatibility. The inner layer was made of degummed silk yarns/magnesium wires using braiding technology, and the outer layer was made from mixed solution of silk fibroin/chitosan (SF/CS) using freeze-drying treatment.

Intraarticularly injectable silk hydrogel microspheres with enhanced mechanical and structural stability to attenuate osteoarthritis.

A silk fibroin (silk) hydrogel was prepared by using diglycidyl ether (BDDE), a chemical crosslinker commonly used to generate Food and Drug Administration (FDA)-approved hyaluronic acid (HA) medical products. The silk/BDDE hydrogels exhibited high elasticity (compressive modulus of 166 ± 15.0 kPa), anti-fatigue properties, and stable structure and mechanical strength in aqueous solution.

Multi-functional Calotropis gigantea fabric using self-assembly silk fibroin, chitosan and nano-silver microspheres with oxygen low-temperature plasma treatment.

The present paper describes a novel multi-functional Calotropis gigantea (CG) fabric with durable antibacterial property and comfortable wearability for various applications. First, antibacterial microspheres (AMs) were prepared by self-assembly of silk fibroin (SF), chitosan (CS) and nano-silver microspheres (NSMs). Oxygen low-temperature plasma (OLTP) treatment was used to improve the adhesion between AMs and CG yarn.

Sustainable Antibacterial and Anti-Inflammatory Silk Suture with Surface Modification of Combined-Therapy Drugs for Surgical Site Infection.

Silk sutures with antibacterial and anti-inflammatory functions were developed for sustained dual-drug delivery to prevent surgical site infections (SSIs). The silk sutures were prepared with core-shell structures braided from degummed silk filaments and then coated with a silk fibroin (SF) layer loaded with berberine (BB) and artemisinin (ART). Both the rapid release of drugs to prevent initial biofilm formation and the following sustained release to maintain effective concentrations for more than 42 days were demonstrated.

Implantable nerve guidance conduits: Material combinations, multi-functional strategies and advanced engineering innovations.

Nerve guidance conduits (NGCs) have attracted much attention due to their great necessity and applicability in clinical use for the peripheral nerve repair. Great efforts in recent years have been devoted to the development of high-performance NGCs using various materials and strategies. The present review provides a comprehensive overview of progress in the material innovation, structural design, advanced engineering technologies and multi functionalization of state-of-the-art nerve guidance conduits NGCs.

A flexible and biocompatible bombyx mori silk fibroin/wool keratin composite scaffold with interconnective porous structure.

The paper describes the preparation of a porous bombyx mori silk fibroin (SF)/wool keratin (WK) composite scaffold with mimic structure and function for cartilage tissue engineering. A porous composite scaffold made from SF/WK in an appropriate concentration and mass ratio was prepared using a freeze-drying technique. Results showed that the composite scaffolds are water-insoluble; possess good mechanical properties, porosity above 80%, and pore size above 200 μm.

Porous nerve guidance conduits reinforced with braided composite structures of silk/magnesium filaments for peripheral nerve repair.

Peripheral nerve repair is a common but challenging surgical treatment. Many artificial nerve grafts have been developed, including nerve guidance conduits (NGCs) with biocompatibility, suitable mechanical properties and topography to guide axon growth. However, there remains a need to promote nerve regeneration and accelerate functional recovery using NGCs for nerve reconstruction.

Sustainable Antibacterial Surgical Suture Using a Facile Scalable Silk-Fibroin-Based Berberine Loading System.

Medical sutures with sustainable antibacterial properties can effectively inhibit pathogens, thus avoiding the occurrence of surgical site infection and reducing the recurrence of patients resulting in postoperative death. This paper describes a facile scalable antibacterial surgical suture with sustainable antibacterial function and fair mechanical and biocompatible properties using a simple, efficient, and eco-friendly method. Silk filaments were braided into a core-shell structure using a braiding machine, and then silk fibroin (SF) films loaded with different percentages of berberine (BB) were coated onto the surface of the suture.

Sustained Photosynthesis and Oxygen Generation of Microalgae-Embedded Silk Fibroin Hydrogels.

Microalgae immobilized in hydrogels offer advantages over those cultured in suspension culture in terms of carbon fixation and oxygen emission. However, alginate as a commonly used hydrogel for microalgal immobilization encounters problems with mechanical strength and stability. To address this limitation, silk fibroin (silk) hydrogels prepared by ultrasonication were utilized to host microalgae when mixed with the presonicated protein solution prior to its gelation.

Ductility and Porosity of Silk Fibroin Films by Blending with Glycerol/Polyethylene Glycol and Adjusting the Drying Temperature.

Ductility and porosity of biofunctional films (BFFs) are critical properties for mechanical compliance and intercellular communication in tissue engineering. However, it remains a significant challenge to integrate these two key properties into BFFs. Herein, silk fibroin (SF) films with tunable ductility and porosity were prepared by adjusting the protein self-assembly process through combinations with glycerol (Gly) and polyethylene glycol 400 (PEG400) and regulating the film-casting temperature.

Flexible Water-Absorbing Silk-Fibroin Biomaterial Sponges with Unique Pore Structure for Tissue Engineering.

Silk fibroin (SF) scaffolds are widely used in tissue engineering due to their biocompatibility and slow biodegradability. However, the relatively stiff mechanical properties and low permeability of these systems can limit some applications. In this study, a new type of water-stable silk sponge (ASF-PEG-S) was obtained by inducing nanoparticle (50-300 nm in diameter) formation in SF solution by autoclaving followed by freeze-drying and rinsing the dry sponges with low-molecular weight (400 Da) polyethylene glycol (PEG400) to induce SF β-sheet structure formation and thus stability in water.

Tuning Microcapsule Shell Thickness and Structure with Silk Fibroin and Nanoparticles for Sustained Release.

Microcapsules have attracted widespread interest for their unique properties in encapsulation, protection, and separation of active ingredients from the surrounding environment. However, microcapsule carriers with controllable shell thickness, permeability, good mechanical properties, and thermostability are challenging to obtain. Herein, robust and versatile composite microcapsules were fabricated using SiO nanoparticle-stabilized (Pickering) oil emulsions as core templates, while silk fibroin (SF) was assembled at the oil/water interface.

Generation of Nano-pores in Silk Fibroin Films Using Silk Nanoparticles for Full-Thickness Wound Healing.

Silk fibroin films are used in tissue engineering due to their biocompatibility, optical clarity, and slow biodegradability. However, the relatively smooth surface and low permeability of these systems may limit some applications; thus, here, a method was developed to generate nano-pores in methanol or ethanol-treated silk fibroin films. The first step was to induce the formation of nanoparticles (50-300 nm diam.

Low-Density Silk Nanofibrous Aerogels: Fabrication and Applications in Air Filtration and Oil/Water Purification.

A method was developed to fabricate light, water-insoluble silk fibroin nanofibrous aerogels (SNFAs) through solvent welding of lyophilized silk nanofibrous 3D networks at the junction points while converting silk structures from random-coils to β-sheets (water insoluble). Aromatic alcohols, especially phenethyl alcohol (PEA), supported robust solvent welding and the structural conversion of silk. PEA vapor treatment was a better approach than solvent infusion to retain volume, density, and mechanical strength of the SNFAs.

Silk/polyols/GOD microneedle based electrochemical biosensor for continuous glucose monitoring.

This work illustrates the feasibility of a microneedle based electrochemical biosensor for continuous glucose monitoring. The device consists of three silk/d-sorbitol pyramidal microneedles integrated with platinum (Pt) and silver (Ag) wires and immobilized glucose selective enzyme (glucose oxidase, GOD) during fabrication. The silk/d-sorbitol composite can provide a biocompatible environment for the enzyme molecules.

Control of octreotide release from silk fibroin microspheres.

Poly(d,l-lactide-co-glycolide) (PLGA) microspheres have been used as an injectable depot for prolonged release of octreotide (Sandostatin LAR®), a peptide drug for the treatment of acromegaly and gastrointestinal tumors. However, acylation and incomplete release of the encapsulated octreotide, as well as acidic degradation product-induced inflammation are the major challenges hampering widespread clinical applications of this delivery system. The purpose of this study was to develop a novel octreotide-delivering system utilizing naturally derived biodegradable material, silk fibroin (SF).