Stereochemistry-Tuned Hydrogen-Bonding Synergistic Covalent Adaptable Networks: Towards Recycled Elastomers with Excellent Creep-Resistant Performance.

Covalent adaptable networks (CANs) offer innovative solutions for the reprocessing and recycling of thermoset polymers. However, achieving a balance between easy reprocessing and creep resistance remains a challenge. This study focuses on designing and synthesizing polyurethane (PU) materials with tailored properties by manipulating the stereochemistry of diamine chain extenders.

Boosting the energy storage performance of BCZT-based capacitors by constructing a Schottky contact.

Multilayer thin films composed of dielectric BaCaZrTiO (BCZT) and oxygen-deficient BCZT (BCZT-OD) were fabricated on (001)-oriented NSTO substrates using the pulsed laser deposition (PLD) technique. Unlike conventional approaches to energy storage capacitors, which primarily focus on compositional or structural modifications, this study explored the influence of the layer sequence and periodicity. The interface between the NSTO substrate and the BCZT-OD layer forms a Schottky barrier, resulting in electric field redistribution across the sublayers of the BCZT/BCZT-OD//(1P) thin film.

3D Printing of Graphene Aerogel Microspheres to Architect High-Performance Electrodes for Hydrogen Evolution Reaction.

The hydrogen evolution reaction (HER) efficiency is highly dependent on the electrocatalysts microstructure and the macrostructure of the electrodes. Herein, the graphene aerogel microspheres loaded with well-dispersed ultrafine Ni/Co nanoparticles catalyst is prepared through electro-spraying, in-situ crosslinking, freeze-drying, and pyrolysis, and then is utilized to print the HER electrode via direct ink writing (DIW). The obtained graphene-based aerogel microspheres possess peculiar cabbage-like mesoporous structures which allow ready access of reaction species to active sites, optimal mass transfer, and proton diffusion within the microspheres.

3D Printing Self-Healing and Self-Adhesive Elastomers for Wearable Electronics in Amphibious Environments.

To meet the demands of challenging usage scenarios, there is an increasing need for flexible electronic skins that can operate properly not only in terrestrial environments but also extend to complex aquatic conditions. In this study, we develop an elastomer by incorporating dynamic urea bonds and hydrogen bonds into the polydimethylsiloxane backbone, which exhibits excellent autonomous self-healing and reversible adhesive performance in both dry and wet environments. A multifunctional flexible sensor with excellent sensing stability, amphibious self-healing capacity, and amphibious self-adhesive performance is fabricated through solvent-free 3D printing.

[Determination of 10 carbamate pesticide residues in liquid milk by ultra performance liquid chromatography-tandem mass spectrometry with pass-through solid-phase extraction purification].

Carbamates are used in broad-spectrum insecticides and herbicides, and have highly efficient, low-residue, and long-lasting characteristics. However, this type of pesticide exerts mutagenic, teratogenic, carcinogenic, and other adverse effects, and its frequent use can exceed the recommended scope and limits. Research on the determination of carbamate pesticides mainly focuses on foods of plant origin and pays less attention to foods of animal origin.

Selective Laser Sintering of Polydimethylsiloxane Composites.

Conductive silicone elastomer carbon nanotubes (CNTs) composites possess potential applications in a variety of fields, including electronic skin, wearable electronics, and human motion detection. Based on a novel self-made covalent adaptable network (CANs) of polydimethylsiloxane (PDMS) containg dynamic steric-hindrance pyrazole urea bond (PDMS-CANs), CNTs wrapped PDMS-CANs (CNTs@PDMS-CANs) powders were prepared by a liquid phase adsorption and deposition, and were successfully used for selective laser sintering (SLS) three-dimensional printing. SLS-printed PDMS-CANs/CNTs nanocomposites possess high electrical conductivity and low percolation threshold as SLS is one kind of quasi-static processing, which leads to the formation of conductive segregated CNTs network by using the PDMS powders with special CNTs wrapped structure.

Synthesis of a magnetic micelle molecularly imprinted polymers to selective adsorption of rutin from Sophora japonica.

Rutin is a naturally active compound with biological and medical value. The traditional extraction and separation method not only destroys the structure and activity of rutin, but results in a low extraction rate. In this work, the magnetic micellar molecularly imprinted polymer of rutin with a selective recognition function, i.

Controllable construction of multifunctional superhydrophobic coating with ultra-stable efficiency for oily water treatment.

Designing interfacial coating with tailored characteristics is a crucial step in regulating the wetting properties of oil/water separation materials; however, the controllable fabrication of multifunctional layer with long-term durability in harsh environments remains challenging. Fabrication of raised dots based on magnetic FeO particles on micro-nanometer units, inspired by mussel chemistry, under the adhesion behavior of dopamine (DA) self-polymerization covalent deposition of FeO particles and hydrophobic polydimethylsiloxane (PDMS) modification to synthesize magnetic superhydrophobic cotton composites (Cotton-P). Due to the unique magnetic and superhydrophobic surface composition, the synthetic Cotton-P possesses superhydrophobic (155.

FSCN1 Promotes Glycolysis and Epithelial-Mesenchymal Transition in Prostate Cancer through a YAP/TAZ Signaling Pathway.

Objective: The aim of the study is to investigate the role and possible mechanism of fascin-1 (FSCN1) in the invasion, migration, glycolysis, and epithelial-mesenchymal transition (EMT) of prostate cancer.

Methods: Real-time quantitative polymerase chain reaction (qRT-PCR) was utilized to determine the mRNA expression level of FSCN1 in prostate cancer tissues and prostate cancer cells PC-3 and DU145. The transwell and the scratch test were applied to detect the invasion and migration abilities of cells, respectively.

Robust and recyclable graphene/chitosan composite aerogel microspheres for adsorption of oil pollutants from water.

Despite recent progress in graphene-based aerogels, challenges such as low mechanical strength and adsorption efficiency are still remaining. Here the reduced graphene oxide (rGO)/chitosan (CS) composite aerogel microspheres (rGCAMs) with center-diverging microchannel structures were developed by electrospraying and freeze-drying method. The optimized rGCAMs exhibit a high Young's modulus of 197 kPa and can support ~75,000 times its own weight, due to the cross-linking of CS by glutaraldehyde.

The Effect of the 3D Nanoarchitecture and Ni-Promotion on the Hydrogen Evolution Reaction in MoS /Reduced GO Aerogel Hybrid Microspheres Produced by a Simple One-Pot Electrospraying Procedure.

The transition toward renewable energy sources requires low-cost, efficient, and durable electrocatalysts for green H production. Herein, an easy and highly scalable method to prepare MoS nanoparticles embedded in 3D partially reduced (pr) graphene oxide (GO) aerogel microspheres (MoS /prGOAMs) with controlled morphology and composition is described. Given their peculiar center-diverging mesoporous structure, which allows easy access to the active sites and optimal mass transport, and their efficient electron transfer facilitated by the intimate contact between the MoS and the 3D connected highly conductive pr-GO sheets, these materials exhibit a remarkable electrocatalytic activity in the hydrogen evolution reaction (HER).

Recent Advances of Self-Healing Polymer Materials via Supramolecular Forces for Biomedical Applications.

Noncovalent interactions can maintain the three-dimensional structures of biomacromolecules (e.g., polysaccharides and proteins) and control specific recognition in biological systems.

Biocompatible hypocrellin A-Fe(III) nanoparticles exhibiting efficient photo-activated CDT and .

Chemodynamic therapy (CDT) is novel and promising for cancer treatment, however, the potential systematic toxicity of the used nanoparticles is still a big concern. In this work the biocompatible hypocrellin A-Fe(III) nanoparticles (HA-Fe(III) NPs) were synthesized and studied. The CDT effect of HA-Fe(III) NPs in the dark is negligible but can be photo-activated upon red light irradiation, which is meaningful to realize precise CDT treatment by selective light irradiation.

Progress in Utilizing Dynamic Bonds to Fabricate Structurally Adaptive Self-Healing, Shape Memory, and Liquid Crystal Polymers.

Stimuli-responsive structurally dynamic polymers are capable of mimicking the biological systems to adapt themselves to the surrounding environmental changes and subsequently exhibiting a wide range of responses ranging from self-healing to complex shape-morphing. Dynamic self-healing polymers (SHPs), shape-memory polymers (SMPs), and liquid crystal elastomers (LCEs), which are three representative examples of stimuli-responsive structurally dynamic polymers, have been attracting broad and growing interest in recent years because of their potential applications in the fields of electronic skin, sensors, soft robots, artificial muscles, and so on. Recent advances and challenges in the developments toward dynamic SHPs, SMPs, and LCEs are reviewed, focusing on the chemistry strategies and the dynamic reaction mechanisms that enhance the performances of the materials including self-healing, reprocessing, and reprogramming.

An Alkynyl-Dangling Ru(II) Polypyridine Complex for Targeted Antimicrobial Photodynamic Therapy.

To realize clinical application of antibacterial photodynamic therapy (aPDT), one of the most arduous challenges is how to render aPDT agents high selectivity against bacterial pathogens. In light of the fact that amino group-containing lipids are rich on the outer surfaces of Gram-positive bacteria, we herein constructed an alkynyl-dangling ruthenium(II) polypyridine complex (Ru2) to preferentially label Staphylococcus aureus (S. aureus) and methicillin-resistant Staphylococcus aureus (MRSA) over mammalian cells via the amino-yne bio-orthogonal click reaction.

A Ru-anthraquinone dyad with triple functions of PACT, photoredox catalysis and PDT upon red light irradiation.

Phototherapy for cancer treatment has received much attention in recent years, and compounds with multiple anticancer mechanisms upon irradiation are particularly appealing. In this work, a nitro-anthraquinone group was attached to a biq (2,2'-biquinoline) ligand based Ru(ii) complex, endowing the resultant Ru1 compound with multiple anticancer mechanisms upon 600 nm light irradiation. Ru1 can undergo biq ligand photodissociation, showing its potential as a photoactivated chemotherapy (PACT) agent.

Comprehensive analysis of the functions and prognostic significance of RNA-binding proteins in bladder urothelial carcinoma.

Alterations in RNA-binding proteins (RBPs) are reported in various cancer types; however, the role of RBPs in bladder urothelial cancer (BLCA) remains unknown. This study aimed to systematically examine the function and prognostic significance of RBPs in bladder cancer using bioinformatics analyses. RNA sequencing and clinical data for BLCA were downloaded from The Cancer Genome Atlas (TCGA) database, and differentially expressed RBPs (DERBPs) between normal and cancer tissues were identified.

Hybrid Transition Metal Dichalcogenide/Graphene Microspheres for Hydrogen Evolution Reaction.

A peculiar 3D graphene-based architecture, i.e., partial reduced-Graphene Oxide Aerogel Microspheres (prGOAM), having a dandelion-like morphology with divergent microchannels to implement innovative electrocatalysts for the hydrogen evolution reaction (HER) is investigated in this paper.

High intensity focused ultrasound responsive release behavior of metallo-supramolecular block PPG-PEG copolymer micelles.

An amphiphilic metallo-supramolecular poly(propylene glycol)-block-poly(ethylene glycol) block copolymer containing a bis(2,2':6',2″-terpyridine) ruthenium (II) complex as a supramolecular connection between the two constituting blocks was used to prepare stable aqueous micelles which displayed a high intensity focused ultrasound (HIFU) triggered release behavior. By adjusting the HIFU time and intensity, the novel modality of HIFU triggered release allows for fine-tuning of the release kinetics of the encapsulants from the micelles in a remote and controlled way. Nuclear magnetic resonance spectroscopy, ultraviolet spectroscopy, and matrix-assisted laser desorption/ionization-time of flight mass spectrometry confirmed that the degradation of the micelles was due to the cleavage of the ether bond connected to the pyridine ring.

Polyurethane-modified graphene oxide composite bilayer wound dressing with long-lasting antibacterial effect.

In order to obtain a novel multifunctional wound dressing with good water vapor permeability and long-lasting antibacterial properties, a skin-like thermoplastic polyurethane (TPU) bilayer membrane containing self-made polyhexamethylene guanidine hydrochloride (PHMG) grafted graphene oxide (MGO) was prepared by non-solvent phase separation and particle filtration. The antibacterial properties and wound-healing ability of TPU, GO-TPU, MGO-TPU composite porous membrane are systematically compared. The results show that with the incorporation of MGO, the porous MGO-TPU membrane exhibits good biocompatibility, excellent water vapor transmission properties, and long-lasting broad-spectrum antibacterial properties (the antibacterial property remains unchanged for 30 days under continuously shaking and washing).

Novel Poly(vinyl alcohol)/Chitosan/Modified Graphene Oxide Biocomposite for Wound Dressing Application.

Rapid absorption of wound exudate and prevention of wound infection are prerequisites for wound dressing to accelerate wound healing. In this study, a novel kind of promising wound dressing is developed by incorporating polyhexamethylene guanidine (PHMG)-modified graphene oxide (mGO) into the poly(vinyl alcohol)/chitosan (PVA/CS) matrix, conferring the dressing the required mechanical properties, higher water vapor transmission rate (WVTR), less swelling time, improved antibacterial activity, and more cell proliferation compared to the PVA/CS film crosslinked by genipin. In vivo experiments indicate that the PVA/CS/mGO composite film can accelerate wound healing via enhancement of the re-epithelialization.

Constructing 3D Graphene Network in Rubber Nanocomposite via Liquid-Phase Redispersion and Self-Assembly.

A three-dimensional graphene (GE) segregated network structure is of significance for improving the conductivity of composites. However, constructing such a GE network structure in composites still remains a challenge. Here, we demonstrate a facile process, that is, liquid-phase redispersion and self-assembly (LRS) to prepare polymer nanocomposites with graphene segregated networks.

4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient.

Liquid crystal elastomers (LCEs), a class of soft materials capable of a large and reversible change in the shape under the trigger of external stimuli, can be fabricated into diverse architectures with complicated deformation modes through four-dimensional (4D) printing. However, the printable LCE ink is only in the form of monomeric precursors and the deformation mode is limited to contraction/extension deformation. Herein, we report a novel approach to break through these limitations.

Preparation, characterization and properties of intrinsic self-healing elastomers.

Significant advances have been made in the development of self-healing synthetic polymer materials in recent years. This review article discusses the recent progress in preparation, characterization and properties of different kinds of intrinsic self-healing elastomers based on reversible covalent bonds and dynamic supramolecular chemistry. Healing conditions, mechanical property recovery and healing efficiency are the main discussion topics.

Ultrasound Reversible Response Nanocarrier Based on Sodium Alginate Modified Mesoporous Silica Nanoparticles.

Mesoporous silica nanoparticles (MSN) covered by polymer coatings, cross-linked by weak coordination bonds were expected to present a reversible responsiveness under on-off ultrasound stimuli. Herein, we prepared a sodium alginate (SA) modified MSN with carboxyl-calcium (COO-Ca) coordination bonds in the modified layer, which could block the mesopores of MSN and effectively prevent the cargo from pre-releasing before stimulation. The coordination bonds would be destroyed under the stimulation of low intensity ultrasound (20 kHz) or high intensity focused ultrasound (HIFU, 1.