Identifying serum metabolite biomarkers for autoimmune diseases: a two-sample mendelian randomization and meta-analysis.

Background: Extensive evidence suggests a link between alterations in serum metabolite composition and various autoimmune diseases (ADs). Nevertheless, the causal relationship underlying these correlations and their potential utility as dependable biomarkers for early AD detection remain uncertain.

Objective: The objective of this study was to employ a two-sample Mendelian randomization (MR) approach to ascertain the causal relationship between serum metabolites and ADs.

The crucial prognostic signaling pathways of pancreatic ductal adenocarcinoma were identified by single-cell and bulk RNA sequencing data.

Pancreatic ductal adenocarcinoma (PDAC) is a malignant tumor with poor prognosis and high mortality. Although a large number of studies have explored its potential prognostic markers using traditional RNA sequencing (RNA-Seq) data, they have not achieved good prediction effect. In order to explore the possible prognostic signaling pathways leading to the difference in prognosis, we identified differentially expressed genes from one scRNA-seq cohort and four GEO cohorts, respectively.

Mendelian randomization analyses of known and suspected risk factors and biomarkers for myasthenia gravis overall and by subtypes.

Background: Myasthenia gravis (MG) is an autoimmune disease that affects neuromuscular junction. The literature suggests the involvement of circulating cytokines (CK), gut microbiota (GM), and serum metabolites (SM) with MG. However, this research is limited to observational trials, and comprehensive causal relationship studies have not been conducted.

Material flow analysis on the critical resources from spent power lithium-ion batteries under the framework of China's recycling policies.

With the rapid growth of electric vehicles in China, the number of spent power lithium-ion batteries is dramatically increased. Considering the environmental risk, security risk, and potential resource value, China has issued a series of laws and regulations to manage the spent power lithium-ion batteries. This work employs the material flow analysis method to evaluate the material flows of Li, Ni, Co, and Mn during the life cycle of power lithium-ion batteries under the framework of China's recycling policy system.

A mechanochemical method for one-step leaching of metals from spent LIBs.

A one-step system based on mechanochemical activation and the use of grape skins (GS) was proposed to recover metals from lithium-ion batteries (LIBs) cathode waste. The effects of the ball-milling (BM) speed, BM time, and quantity of added GS on the metal leaching rate were explored. The spent lithium cobalt oxide (LCO) and its leaching residue before and after mechanochemistry were characterized by SEM, BET, PSD, XRD, FT-IR, and XPS analysis.

Flexible high-performance microcapacitors enabled by all-printed two-dimensional nanosheets.

Chemically exfoliated nanosheets have exhibited great potential for applications in various electronic devices. Solution-based processing strategies such as inkjet printing provide a low-cost, environmentally friendly, and scalable route for the fabrication of flexible devices based on functional inks of two-dimensional nanosheets. In this study, chemically exfoliated high-k perovskite nanosheets (i.

A sustainable approach for selective recovery of lithium from cathode materials of spent lithium-ion batteries by induced phase transition.

Recycling of spent lithium-ion batteries (LIBs) has attracted widespread attention because of their dual attributes to environmental protection and resource conservation. Utilization of strong corrosive acids is currently the preferred way to recover valuable metals from spent LIBs, but the extensive use of chemical reagents can pose serious environmental risks. Herein, this research proposes a green process for selective recovery of lithium using the material of spent LIBs itself without adding exogenous reagents, mechanochemistry induced phase transition.

Interfacial Electrochemical Polymerization for Spinning Liquid Metals into Core-Shell Wires.

Metal wires are of great significance in applications such as three-dimensional (3D) printing, soft electronics, optics, and metamaterials. Ga-based liquid metals (e.g.

Dark Web Data Classification Using Neural Network.

There are several issues associated with Dark Web Structural Patterns mining (including many redundant and irrelevant information), which increases the numerous types of cybercrime like illegal trade, forums, terrorist activity, and illegal online shopping. Understanding online criminal behavior is challenging because the data is available in a vast amount. To require an approach for learning the criminal behavior to check the recent request for improving the labeled data as a user profiling, Dark Web Structural Patterns mining in the case of multidimensional data sets gives uncertain results.

Uncovering the in-use metal stocks and implied recycling potential in electric vehicle batteries considering cascaded use: a case study of China.

With the rapid promotion of new energy vehicles, in-use electric vehicle batteries (EVBs) are becoming an important component of urban mining. This paper analyzed the metal stocks in EVBs in China from 2009 to 2019 using a bottom-up method, which focused on the in-use stock of seven main metals, namely, nickel, cobalt, manganese, lithium, copper, aluminum, and iron, in primary use stage and secondary use stage of three EVB types, namely, lithium nickel manganese cobalt oxide battery (NMC), lithium iron phosphate battery (LFP), and lithium manganese oxide battery (LMO). It was found that the rapid development of electric vehicles (EVs) contributed to a dramatic increase in in-use metal stocks from 0.

Mixed-valent MnSiO/C nanocomposite for high-performance asymmetric supercapacitor.

In this work, carbon-coated manganese silicate (MnSiO/C) nanocomposite with excellent cycling stability was fabricated via a cost-effective process. The carbon coating followed with a CO heat treatment process on the manganese silicate results in mixed-valent hierarchically-porous nanoparticles, which tightly connects with an ultrathin (∼1.5 nm) and ordered carbon coating layer.

Recycling of LiNiCoMnO cathode materials from spent lithium-ion batteries using mechanochemical activation and solid-state sintering.

The production of lithium-ion battery is around 9100 million sets in 2016 and is believed to further increase consecutively. This fact triggers the generation of spent cathode materials which contain metals of both valuable and hazardous. Their recycling corresponding to life cycle sustainability of lithium-ion battery has attracted significant attention.

Spent lead-acid battery recycling in China - A review and sustainable analyses on mass flow of lead.

Lead is classified to be one of the top heavy metal pollutants in China. The corresponding environmental issues especially during the management of spent lead-acid battery have already caused significant public awareness and concern. This research gives a brief overview on the recycling situation based on an investigation of the lead industry in China and also the development of technologies for spent lead-acid batteries.

Lithium Carbonate Recovery from Cathode Scrap of Spent Lithium-Ion Battery: A Closed-Loop Process.

A closed-loop process to recover lithium carbonate from cathode scrap of lithium-ion battery (LIB) is developed. Lithium could be selectively leached into solution using formic acid while aluminum remained as the metallic form, and most of the other metals from the cathode scrap could be precipitated out. This phenomenon clearly demonstrates that formic acid can be used for lithium recovery from cathode scrap, as both leaching and separation reagent.

Spent lithium-ion battery recycling - Reductive ammonia leaching of metals from cathode scrap by sodium sulphite.

Recycling of spent lithium-ion batteries has attracted wide attention because of their high content of valuable and hazardous metals. One of the difficulties for effective metal recovery is the separation of different metals from the solution after leaching. In this research, a full hydrometallurgical process is developed to selectively recover valuable metals (Ni, Co and Li) from cathode scrap of spent lithium ion batteries.

Effect of phosphate additives on the microstructure, bioactivity, and degradability of microarc oxidation coatings on Mg-Zn-Ca-Mn alloy.

Calcium phosphate coatings were prepared on the surface of self-designed Mg-Zn-Ca-Mn alloy using microarc oxidization technology. To characterize the microstructures, cross-section morphologies, and compositions of the coatings, the authors used scanning electron microscopy equipped with an energy-disperse spectrometer, x-ray diffraction, and Fourier transform infrared spectroscopy. Potentiodynamic polarization in the simulated body fluid (SBF) was used to evaluate the corrosion behaviors of the samples.

High performance NiFe layered double hydroxide for methyl orange dye and Cr(VI) adsorption.

The NiFe layered double hydroxides (LDHs) with different mole ratio of Ni/Fe (4:1, 3:1, 7:3 and 1:1) were prepared by a simple coprecipitation method. The adsorption performance were evaluated by the removal of methyl orange (MO) dye and hexavalent chromium(VI) heavy metal ion. It is found that Ni4Fe1-LDH can remove more than 92% of MO in 10 min at the 10 mg/L MO initial concentration, and 97% of Cr(VI) in 1 h at 4 mg/L Cr2O7(2-) initial concentration.

A novel fourth-order calibration method based on alternating quinquelinear decomposition algorithm for processing high performance liquid chromatography-diode array detection- kinetic-pH data of naptalam hydrolysis.

Five-way high performance liquid chromatography-diode array detection (HPLC-DAD)-kinetic-pH data were obtained by recording the kinetic evolution of HPLC-DAD signals of samples at different pH values and a new fourth-order calibration method, alternating quinquelinear decomposition (AQQLD) based on pseudo-fully stretched matrix forms of the quinquelinear model, was developed. Simulated data were analyzed to investigate the performance of AQQLD in comparison with five-way parallel factor analysis (PARAFAC). The tested results demonstrated that AQQLD has the advantage of faster convergence rate and being insensitive to the excess component number adopted in the model.

Synthesis of polyethyleneimine capped carbon dots for preconcentration and slurry sampling analysis of trace chromium in environmental water samples.

Carbon dots capped with polyethyleneimine (CD-PEI) were synthesized and applied in selective separation and preconcentration of trace Cr(VI). Dispersed particle extraction (DPE) slurry sampling with flame atomic absorption spectrometry (FAAS) was used to selectively and sensitively determine Cr(VI) in water samples. The as-synthesized CD-PEI was confirmed by Fourier transform infrared spectroscopy, high-resolution transmission electron microscopy, elemental analysis, fluorescence and zeta potential measurement.

A novel process for recycling and resynthesizing LiNi1/3Co1/3Mn1/3O2 from the cathode scraps intended for lithium-ion batteries.

To solve the recycling challenge for aqueous binder based lithium-ion batteries (LIBs), a novel process for recycling and resynthesizing LiNi1/3Co1/3Mn1/3O2 from the cathode scraps generated during manufacturing process is proposed in this study. Trifluoroacetic acid (TFA) is employed to separate the cathode material from the aluminum foil. The effects of TFA concentration, liquid/solid (L/S) ratio, reaction temperature and time on the separation efficiencies of the cathode material and aluminum foil are investigated systematically.

Random composites of nickel networks supported by porous alumina toward double negative materials.

Random composites with nickel networks hosted randomly in porous alumina are proposed to realize double negative materials. The random composite for DNMs (RC-DNMs) can be prepared by typical processing of material, which makes it possible to explore new DNMs and potential applications, and to feasibly tune their electromagnetic parameters by controlling their composition and microstructure. Hopefully, various new RC-DNMs with improved performance will be proposed in the future.

Transfect bone marrow stromal cells with pcDNA3.1-VEGF to construct tissue engineered bone in defect repair.

Background: We previously showed that nano-hydroxyapatite/carboxymethyl chitosan (n-Ha/CMCS) displayed excellent mechanical properties, good degradation rates and exceptional biocompatibility, with negligible toxicity. The aim of this study was to determine the effect of the same composite with vascular endothelial growth factor (VEGF)- transfected bone marrow stromal cells (BMSCs) in a rabbit radial defect model.

Methods: The nano-hydroxyapatite was produced through co-precipitation.