Enabling data-driven and bidirectional model development in Verilog-A for photonic devices.

We present a method to model photonic components in Verilog-A by introducing bidirectional signaling through a single port. To achieve this, the concept of power waves and scattering parameters from electromagnetism are employed. As a consequence, one can simultaneously transmit forward and backward propagating waves on a single wire while also capturing realistic, measurement-backed responses of photonic components in Verilog-A.

Efficient layout-aware statistical analysis for photonic integrated circuits.

Fabrication variability significantly impacts the performance of photonic integrated circuits (PICs), which makes it crucial to quantify the impact of fabrication variations before the final fabrication. Such analysis enables circuit and system designers to optimize their designs to be more robust and obtain maximum yield when designing for manufacturing. This work presents a simulation methodology, Reduced Spatial Correlation Matrix-based Monte-Carlo (RSCM-MC), to efficiently study the impact of spatially correlated fabrication variations on the performance of PICs.

High-performance silicon photonic tri-state switch based on balanced nested Mach-Zehnder interferometer.

This work proposes a novel silicon photonic tri-state (cross/bar/blocking) switch, featuring high-speed switching, broadband operation, and crosstalk-free performance. The switch is designed based on a 2 × 2 balanced nested Mach-Zehnder interferometer structure with carrier injection phase tuning. As compared to silicon photonic dual-state (cross/bar) switches based on Mach-Zehnder interferometers with carrier injection phase tuning, the proposed switch not only has better performance in cross/bar switching but also provides an extra blocking state.

Performance prediction for silicon photonics integrated circuits with layout-dependent correlated manufacturing variability.

This work develops an enhanced Monte Carlo (MC) simulation methodology to predict the impacts of layout-dependent correlated manufacturing variations on the performance of photonics integrated circuits (PICs). First, to enable such performance prediction, we demonstrate a simple method with sub-nanometer accuracy to characterize photonics manufacturing variations, where the width and height for a fabricated waveguide can be extracted from the spectral response of a racetrack resonator. By measuring the spectral responses for a large number of identical resonators spread over a wafer, statistical results for the variations of waveguide width and height can be obtained.

Compact broadband polarization beam splitter using a symmetric directional coupler with sinusoidal bends.

We design and demonstrate a compact broadband polarization beam splitter (PBS) using a symmetric directional coupler with sinusoidal bends on a silicon-on-insulator platform. The sinusoidal bends in our PBS suppress the power exchange between two parallel symmetric strip waveguides for the transverse-electric (TE) mode, while allowing for the maximum power transfer to the adjacent waveguide for the transverse-magnetic (TM) mode. Our PBS has a nominal coupler length of 8.

Broadband 2 × 2 adiabatic 3 dB coupler using silicon-on-insulator sub-wavelength grating waveguides.

We report on a compact, broadband, 2×2 adiabatic 3 dB coupler using sub-wavelength gratings (SWGs) for silicon-on-insulator waveguides. In our device, two SWG waveguides that support two transverse electric modes and have tapered waveguide widths were used to achieve an adiabatic mode evolution of the two-waveguide system for broadband 3 dB power splitting. We present results for a SWG adiabatic 3 dB coupler that has an overall coupler length of 50 μm and achieves broadband power splitting over a 130 nm wavelength range with an imbalance of no greater than ±0.

Wideband silicon photonic polarization beamsplitter based on point-symmetric cascaded broadband couplers.

We design and demonstrate a wideband silicon photonic polarization beamsplitter on a silicon-on-insulator platform. The device consists of two 3 dB broadband couplers cascaded in a point-symmetric network. The transverse electric (TE) and transverse magnetic (TM) modes are coupled to different output ports due to a large difference between their coupling strengths.

Design of broadband subwavelength grating couplers with low back reflection.

We present a methodology to design broadband grating couplers using one-dimensional subwavelength gratings. Using the presented method, we design subwavelength grating couplers (SWGCs) with 1-dB bandwidths ranging from 50 to 90 nm. Our designed SWGCs have competitive coupling efficiency, as high as -3.

Spiral Bragg grating waveguides for TM mode silicon photonics.

We demonstrate spiral Bragg grating waveguides (BGWs) on the silicon-on-insulator (SOI) platform for the fundamental transverse magnetic (TM) mode. We also compare TM spiral waveguides to equivalent transverse electric (TE) spiral waveguides and show that the TM spiral waveguides have lower propagation losses. Our spiral waveguides are space-efficient, requiring only areas of 131×131 µm(2) to accommodate 4 mm long BGWs, and, thus, are less susceptible to fabrication non-uniformities.

Dense dissimilar waveguide routing for highly efficient thermo-optic switches on silicon.

We analyze and demonstrate a method for increasing the efficiency of thermo-optic phase shifters on a silicon-on-insulator platform. The lack of cross-coupling between dissimilar waveguides allows highly dense waveguide routing under heating elements and a corresponding increase in efficiency. We demonstrate a device with highly dense routing of 9 waveguides under a 10 µm wide heater and achieve a low switching power of 95 µW, extinction ratio greater than 20 dB, and less than 0.

Broadband silicon photonic directional coupler using asymmetric-waveguide based phase control.

We design and demonstrate broadband directional couplers that use asymmetric-waveguide based phase control sections, on the silicon-on-insulator platform. Broadband directional couplers with various power splitting ratios, including 10%/90%, 20%/80%, 30%/70%, 40%/60% and 50%/50%, were realized for both transverse electric (TE) and transverse magnetic (TM) modes. Some of the devices exhitbit bandwidths in excess of 100 nm, and all in excess of 75 nm.

Giant circular polarization conversion in layer-by-layer nonchiral metamaterial.

We studied numerically the transmission properties of a kind of layer-by-layer nonchiral metamaterial. Simulation results show that under certain off-normal incidence, giant circular polarization conversion occurs for both the right and left circularly polarized waves with a roughly 1 GHz operation band. Meanwhile, the copolarization transmissions are almost suppressed to zero, leading to the high purity circular polarization transformation.

Similar structures, different characteristics: circular dichroism of metallic helix arrays with single-, double-, and triple-helical structures.

We fabricated three-dimensional metallic helix arrays with single-, double-, and triple-helical structures. The transmission performances with the normal incident angle were measured in the microwave frequency of 12-18 GHz. For the single- and double-helical structures, giant circular dichroism with fairly wide bands is observed in the transmission spectra.

Electromagnetic manifestation of chirality in layer-by-layer chiral metamaterials.

The three-dimensional (3D) and two-dimensional (2D) chiral metamaterials (CMMs) have been proved to exhibit circular dichroism and circular conversion dichroism, respectively. The layer-by-layer chiral metamaterials, as a category of 3D CMMs, are expected to show the same properties as bulk 3D structures (e.g.