Biobased Polybutyrolactam Nanofiber with Excellent Biodegradability and Cell Growth for Sustainable Healthcare Textiles.

The white pollution caused by unsustainable materials is a significant challenge around the globe. Here, a novel and fully biobased polybutyrolactam (PBY) nanofiber membrane was fabricated via the electrospinning method. As-spun PBY nanofiber membranes have good thermal stability, high porosity of up to 71.

Development of bio-composite mulch film from cotton gin wastes: Study of pesticide residue and outdoor stability and degradation.

Non-degradable plastic mulch films used in agriculture are polluting the environment by leaving residues and microplastics in the soil. They are also difficult to recycle due to contamination during their use. Biodegradable mulch films are needed as alternatives so that they can be used effectively during the growing season and later be ploughed to be degraded in soil.

Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent.

With an increase in environmental pollution and microplastic problems, it is more urgent now to replace non-biodegradable films with biodegradable films that are low-cost and from renewable resources. Cotton gin motes (GM), a type of cellulosic waste that is generated from cotton ginning, is an excellent candidate for fabricating biodegradable films due to its properties and abundance. In this study, GM was first mechanically milled into a fine powder, followed by compounding with polycaprolactone (PCL) and extruded to produce composite pellets which were then compress-moulded into composite films.

Facile Assembly of Nanofibers within Three-Dimensional Porous Matrices with Arbitrary Characteristics for Creating Biomimetic Architectures.

It is challenging to recapitulate the natural extracellular matrix's hierarchical nano/microfibrous three-dimensional (3D) structure with multilevel pores, good mechanical and hydrophilic properties, and excellent bioactivity for designing and developing advanced biomimetic materials. This work reports a new facile strategy for the scalable manufacturing of such a 3D architecture. Natural polymers in an aqueous solution are interpenetrated into a 3D microfibrous matrix with arbitrary shapes and property characteristics to self-assemble into a nanofibrous network.

Sustainable Cotton Gin Waste/Polycaprolactone Bio-Plastic with Adjustable Biodegradation Rate: Scale-Up Production through Compression Moulding.

Cotton gin trash (CGT), a lignocellulosic waste generated during cotton fibre processing, has recently received significant attention for production of composite bio-plastics. However, earlier studies were limited to either with biodegradable polymers, through small-scale solution-casting method, or using industrially adaptable extrusion route, but with non-biodegradable polymers. In this study, a scale-up production of completely biodegradable CGT composite plastic film with adjustable biodegradation rate is proposed.

Bioactive hierarchical silk fibers created by bioinspired self-assembly.

Artificial recapitulation of the hierarchy of natural protein fibers is crucial to providing strategies for developing advanced fibrous materials. However, it is challenging due to the complexity of the natural environment. Inspired by the liquid crystalline spinning of spiders, we report the development of natural silk-like hierarchical fibers, with bundles of nanofibrils aligned in their long-axis direction, by self-assembly of crystallized silk fibroin (SF) droplets.

Constructing 3D Macroporous Microfibrous Scaffolds with a Featured Surface by Heat Welding and Embossing.

Three-dimensional (3D) microfibrous scaffolds hold great promise for biomedical applications due to their good mechanical properties and biomimetic structure similar to that of the fibrous natural extracellular matrix. However, the large diameter and smooth surface of microfibers provide limited cues for regulating cell activity and behaviors. In this work, we report a facile heat-welding-and-embossing strategy to develop 3D macroporous microfibrous scaffolds with a featured surface topography.

Sustainable Lightweight Insulation Materials from Textile-Based Waste for the Automobile Industry.

Globally, automotive manufacturers are looking for ways to produce environmentally sustainable and recyclable materials for automobiles to meet new regulations and customer desires. To enable the needs for rapid response, this study investigated the feasibility of using waste and virgin wool fibres as cost-effective and sustainable alternatives for automotive sound and heat insulation using a chemical-free approach. Several properties of the currently available commercial automotive insulators were investigated in order to facilitate the designing of green wool-based needle-punched nonwoven materials.

Fabrication of a cost-effective lemongrass () membrane with antibacterial activity for dye removal.

Dye wastewater has attracted much attention due to its severe environmental and health problems. The main challenge of separating dyes from wastewater, using adsorption, is developing a functional adsorbent that is cost-effective and sustainable. In this work, we have fabricated a novel low-cost membrane with antibacterial properties from naturally sustainable lemongrass (LG).

Creating Biomimetic Anisotropic Architectures with Co-Aligned Nanofibers and Macrochannels by Manipulating Ice Crystallization.

The continuous evolution of tissue engineering scaffolds has been driven by the desire to recapitulate structural features and functions of the natural extracellular matrix (ECM). However, it is still an extreme challenge to create a three-dimensional (3D) scaffold with both aligned nanofibers and aligned interconnected macrochannels to mimic the ECM of anisotropic tissues. Here, we develop a facile strategy to create such a scaffold composed of oriented nanofibers and interconnected macrochannels in the same direction, with various natural polymers typically used for tissue regeneration.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs).

Herein, we report the phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs) induced by salt concentration and pH changes. The ionomers are sulfonated polystyrenes (SPSs) with different sulfonation degrees. The emulsion types were determined by conductivity measurements, confocal microscopy and optical microscopy, and the formation of HIPE organogels was verified by the tube-inversion method and rheological measurements.

Green electrospun pantothenic acid/silk fibroin composite nanofibers: fabrication, characterization and biological activity.

Silk fibroin (SF) from Bombyx mori has many established excellent properties and has found various applications in the biomedical field. However, some abilities or capacities of SF still need improving to meet the need for using practically. Indeed, diverse SF-based composite biomaterials have been developed.

Regenerated silk fibroin nanofibrous matrices treated with 75% ethanol vapor for tissue-engineering applications.

As an excellent biocompatible and biodegradable protein polymer, silk fibroin (SF) has found wide applications, particularly serving as therapeutic agent for tissue-engineering applications, on which both post-spin treatment and sterilization processing are crucial to drug-loaded matrices. To find a safe, effective and appropriate post-spin treatment and sterilization approach for drug-loaded biomaterial matrices is one of the major problems in the field of tissue engineering at present. In this work, a simple, safe and effective approach skillfully integrating post-spin treatment with sterilization processing was developed to drug-loaded SF nanofibrous matrices.

Fabrication of chitosan/silk fibroin composite nanofibers for wound-dressing applications.

Chitosan, a naturally occurring polysaccharide with abundant resources, has been extensively exploited for various biomedical applications, typically as wound dressings owing to its unique biocompatibility, good biodegradability and excellent antibacterial properties. In this work, composite nanofibrous membranes of chitosan (CS) and silk fibroin (SF) were successfully fabricated by electrospinning. The morphology of electrospun blend nanofibers was observed by scanning electron microscopy (SEM) and the fiber diameters decreased with the increasing percentage of chitosan.