Amorphous Carbon Nitride Films: Surface and Subsurface Composition and Bonding.

To obtain quantitative information about the composition and bonding of atoms located at and beyond the analyzed solid surface nondestructively, we applied angle-resolved X-ray photoelectron spectroscopy aided by the maximum entropy method to air-exposed amorphous carbon nitride films deposited by pulsed laser deposition of diamond-like carbon modified by low-energy nitrogen ion bombardment during film growth. We demonstrate that the composition, chemical bonding, and mass density vary significantly from the top surface to a shallow subsurface region. The analyzed samples, in a shallow surface region of ∼1 nm, are composed of oxygen, nitrogen, hydrogen, and mostly carbon in sp hybridization.

Utilizing Constant Energy Difference between sp-Peak and C 1s Core Level in Photoelectron Spectra for Unambiguous Identification and Quantification of Diamond Phase in Nanodiamonds.

The modification of nanodiamond (ND) surfaces has significant applications in sensing devices, drug delivery, bioimaging, and tissue engineering. Precise control of the diamond phase composition and bond configurations during ND processing and surface finalization is crucial. In this study, we conducted a comparative analysis of the graphitization process in various types of hydrogenated NDs, considering differences in ND size and quality.

On the Origin of Reduced Cytotoxicity of Germanium-Doped Diamond-Like Carbon: Role of Top Surface Composition and Bonding.

This work attempts to understand the behaviour of Ge-induced cytotoxicity of germanium-doped hydrogen-free diamond-like carbon (DLC) films recently thoroughly studied and published by Jelinek et al. At a low doping level, the films showed no cytotoxicity, while at a higher doping level, the films were found to exhibit medium to high cytotoxicity. We demonstrate, using surface-sensitive methods-two-angle X-ray-induced core-level photoelectron spectroscopy (ARXPS) and Low Energy Ion Scattering (LEIS) spectroscopy, that at a low doping level, the layers are capped by a carbon film which impedes the contact of Ge species with tissue.

In Vitro Bioactivity Test of Real Dental Implants According to ISO 23317.

Purpose: The goal of this study was to compare the in vitro bioactivity in simulated body fluid (SBF) of commercially available dental implants.

Materials And Methods: Bioactivity, according to ISO 23317, of commercially available dental implants with various surface modifications (BIO-surface, SLA, SLActive, TiUnite, and OsseoSpeed) was tested in SBF for 1 and 3 weeks. Surface characterizations, especially calcium and phosphorus surface content before and after the immersion in SBF, were performed.

Antibacterial, mechanical and surface properties of Ag-DLC films prepared by dual PLD for medical applications.

Unlabelled: Silver doped diamond-like carbon layers were deposited by dual pulsed laser deposition using two KrF excimer lasers. The concentration of Ag, determined by XPS and WDS, moved from zero to ~10at%. We found that the sp/sp ratio, film roughness and the number of droplets (SEM and AFM) increased with increasing silver concentration.

Adhesion and differentiation of Saos-2 osteoblast-like cells on chromium-doped diamond-like carbon coatings.

Diamond-like carbon (DLC) thin films are promising for use in coating orthopaedic, dental and cardiovascular implants. The problem of DLC layers lies in their weak layer adhesion to metal implants. Chromium is used as a dopant for improving the adhesion of DLC films.

Deep Neck infections of Odontogenic Origin and Their Clinical Significance. A Retrospective Study from Hradec Králové, Czech Republic.

Introduction: Cellulitis remains a very serious disease even today. Mortality, which varied between 10-40%, has been reduced owing to the standard securing of airway patency and use of an appropriate surgical treatment approach.

Materials And Methods: A total of 195 patients were hospitalised for cellulitis at the University Hospital in Hradec Králové during 2007-2011.

Bonding and bio-properties of hybrid laser/magnetron Cr-enriched DLC layers.

Chromium-enriched diamond-like carbon (DLC) layers were prepared by a hybrid technology using a combination of pulsed laser deposition (PLD) and magnetron sputtering. XRD revealed no chromium peaks, indicating that the layers are mostly amorphous. Carbon (sp(2) and sp(3) bonds) and chromium bonds were determined by XPS from C 1s, O 1s, and Cr 2p photoelectron peaks.

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability.

Composite materials based on a titanium support and a thin, alginate hydrogel could be used in bone tissue engineering as a scaffold material that provides biologically active molecules. The main objective of this contribution is to characterize the activation and the functionalization of titanium surfaces by the covalent immobilization of anchoring layers of self-assembled bisphosphonate neridronate monolayers and polymer films of 3-aminopropyltriethoxysilane and biomimetic poly(dopamine). These were further used to bind a bio-functional alginate coating.

Chromium-doped DLC for implants prepared by laser-magnetron deposition.

Diamond-like carbon (DLC) thin films are frequently used for coating of implants. The problem of DLC layers lies in bad layer adhesion to metal implants. Chromium is used as a dopant for improvement of adhesion of DLC films.

Electron supersurface scattering on polycrystalline Au.

Supersurface electron scattering, i.e., electron energy losses and associated deflections in vacuum above the surface of a medium, is shown to contribute significantly to electron spectra.

Remarks on some reference materials for applications in elastic peak electron spectroscopy.

The quantification of results of electron spectroscopies, AES and XPS, requires knowledge of the inelastic mean free path (IMFP) of signal electrons in solids. This parameter determines the surface sensitivity of both techniques. There are two methods of determining the IMFPs that provide these parameters in agreement with the definition: (i) calculations based on the experimental optical data, and (ii) calculations based on measurements of the electron elastic backscattering intensity.

Electron spectra line shape analysis of highly oriented pyrolytic graphite and nanocrystalline diamond.

The X-ray excited Auger electron spectroscopy (XAES), X-ray photoelectron spectroscopy (XPS) and elastic peak electron spectroscopy (EPES) methods were applied in investigating samples of nanocrystalline diamond and highly oriented pyrolytic graphite of various C sp(2)/sp(3) ratios, crystallinity conditions and grain sizes. The composition at the surface was estimated from the XPS. The C sp(2)/sp(3) ratio was evaluated from the width of the XAES first derivative C KLL spectra and from fitting of XPS C 1s spectra into components.

Electron spectroscopy of corrugated solid surfaces.

This paper reviews work done of the influence of non-ideal surface topography on electron spectral intensities of surface-sensitive electron spectroscopic methods: primarily X-ray induced photoelectron spectroscopy (XPS) and concise Auger electron spectroscopy (AES), electron energy loss spectroscopy in the reflection mode (REELS), and elastic peak electron spectroscopy (EPES). Several attempts to solve the problem are mentioned, where (i) the effect of surface roughness is corrected using a single parameter, (ii) computer simulations based on a model of surface roughness composed of regular geometrical units are used for electron spectral intensity calculations, and finally, (iii) a semi-empirical method based on careful surface mapping of analyzed sample by atomic force microscopy (AFM) is discussed in greater detail. The first approach was found to be rather simple to properly include any complex surface topography.

A plasma polymerization technique to overcome cerebrospinal fluid shunt infections.

Prosthetic devices, mainly shunts, are frequently used for temporary or permanent drainage of cerebrospinal fluid. The pathogenesis of shunt infection is a very important problem in modern medicine and generally this is characterized by staphylococcal adhesion to the cerebrospinal fluid shunt surfaces. In this paper, the prevention of the attachment of test microorganism Staphylococcus epidermidis on the cerebrospinal fluid shunt surfaces by 2-hydroxyethylmethacrylate (HEMA) precursor modification in the plasma polymerization system, is reported.

Modification of glass fibers to improve reinforcement: a plasma polymerization technique.

Objectives: This study evaluates the effect of plasma treated E-glass fiber to improve the mechanical properties of acrylic resin denture base material, polymethylmethacrlyate (PMMA). Plasma surface treatment of fibers is used as reinforcement in composite materials to modify the chemical and physical properties of their surfaces with tailored fiber-matrix bonding strength.

Methods: Three different types of monomer 2-hydroxyethyl methacrylate (HEMA), triethyleneglycoldimethylether (TEGDME) and ethylenediamine (EDA) were used in the plasma polymerization modification of glass fibers.

Coating of zinc ferrite particles with a conducting polymer, polyaniline.

Particles of zinc ferrite, ZnOFe2O3, were coated with polyaniline (PANI) phosphate during the in situ polymerization of aniline in an aqueous solution of phosphoric acid. The PANI-ferrite composites were characterized by FTIR spectroscopy. X-ray photoelectron spectroscopy was used to determine the degree of coating with a conducting polymer.

Antimicrobial properties of aromatic compounds of plant origin.

The antimicrobial action of 11 compounds involving guaiacyl- and syringyl-like structures (low-molecular-weight part of lignin), gallic acid and its derivatives, cinnamic acid and its derivatives, veratric acid, anisic acid and crotonic acid (a total of 25 compounds) against bacteria, yeast-like organisms and protozoa was examined. Aromatic compounds modified in the C-side chain and aldehydes were effective preferentially against Trichomonas vaginalis, whereas against bacteria and yeast-like organisms eugenol was the most effective inhibitor.

Antimicrobial effects of some mono- and bishydrazones.

Antibacterial, antifungal and antiprotozoal effects of nine mono- and bishydrazones of glycolaldehyde, glyoxal, methoxyacetaldehyde and glutaraldehyde were studied using eight model organisms. It was found that bishydrazones are much more efficient antimicrobial agents than monohydrazones in the case of all model microorganisms.

Antiprotozoal effects of some hydrazones.

Antiprotozoal effects of hydrazones derived from compounds with 1 to 4 carbon atoms were studied on the model organism Trichomonas vaginalis isolated from a female patient with acute urogenital trichomoniasis.

Antimicrobial effect of sugar osazones and anhydro sugars.

The antimicrobial effect of 14 sugar osazones and anhydro sugars was studied with model strains of Micrococcus luteus, Bacillus licheniformis, Escherichia coli and strains Staphylococcus aureus and Pseudomonas aeruginosa isolated from clinical material. The relationship between the structure of these compounds, their solubility in water and 1-octanol and antimicrobial effect was investigated.

Determination of the molecular weight of alpha-amylase, as the enzyme-inhibitor complex, using thin layer gel filtration on Sephadex.

Thin layer gel filtration on Sephadex was performed as a simple method for recognition of the small molecular weight differences of human alpha-amylases from different sources. Activity was located with dry chromogenic substrate, using a replica technique. Undesirable interaction between the gel matrix and substrate binding sites on the enzyme, which causes an anomalous decrease in the migration rate of the enzyme protein, was suppressed by preincubation of the enzyme with appropriate inhibitor.