Room Temperature Crystallized Phase-Pure α-FAPbI Perovskite with In-Situ Grain-Boundary Passivation.

Energy loss in perovskite grain boundaries (GBs) is a primary limitation toward high-efficiency perovskite solar cells (PSCs). Two critical strategies to address this issue are high-quality crystallization and passivation of GBs. However, the established methods are generally carried out discretely due to the complicated mechanisms of grain growth and defect formation.

Intermediate Phase Free α-FAPbI Perovskite via Green Solvent Assisted Perovskite Single Crystal Redissolution Strategy.

Perovskite single-crystal redissolution (PSCR) strategy is highly desired for efficient formamidinium lead triiodide (FAPbI ) perovskite photovoltaics with enhanced phase purity, improved film quality, low trap-state density, and good stability. However, the phase transition and crystallization dynamics of FAPbI remain unclear in the PSCR process compared to the conventional fabrication from the mixing of precursor materials. In this work, a green-solvent-assisted (GSA) method is employed to synthesize centimeter-sized α-FAPbI single crystals, which serve as the high-purity precursor to fabricate perovskite films.

Green Solvent Polishing Enables Highly Efficient Quasi-2D Perovskite Solar Cells.

Preferred crystalline orientation at the surface of quasi-2D organic-inorganic halide perovskites is crucial to promote vertical carrier transport and interface carrier extraction, which further contribute to device efficiency and stability in photovoltaic applications. However, loose unoriented and defective surfaces are inevitably formed in the crystallization process, especially with the introduction of bulky organic cations into the quasi-2D perovskites. Here, a facile and effective surface polishing method using a natural-friendly green solvent, 2,2,2-trifluoroethanol, is proposed to reconstruct the surface.

Strain Release and Defect Passivation in Formamidinium-Dominated Perovskite via a Novel in-Plane Thermal Gradient Assisted Crystallization Strategy.

It is essential to release annealing induced strain during the crystallization process to realize efficient and stable perovskite solar cells (PSCs), which does not seem achievable using the conventional annealing process. Here we report a novel and facile thermal gradient assisted crystallization strategy by simply introducing a slant angle between the preheated hot plate and the substrate. A distinct crystallization sequence resulted along the in-plane direction pointing from the hot side to the cool side, which effectively reduced the crystallization rate, controlled the perovskite grain growth, and released the in-plane tensile strain.

Discovery of Lead-Free Perovskites for High-Performance Solar Cells via Machine Learning: Ultrabroadband Absorption, Low Radiative Combination, and Enhanced Thermal Conductivities.

Exploring lead-free candidates and improving efficiency and stability remain the obstacle of hybrid organic-inorganic perovskite-based devices commercialization. Traditional trial-and-error methods seriously restrict the discovery especially for large search space, complex crystal structure and multi-objective properties. Here, the authors propose a multi-step and multi-stage screening scheme to accelerate the discovery of hybrid organic-inorganic perovskites A BB'X from a large number of candidates through combining machine learning with high-throughput calculations for pursuing excellent efficiency and thermal stability in solar cells.

Phase Tailoring of Ruddlesden-Popper Perovskite at Fixed Large Spacer Cation Ratio.

Ruddlesden-Popper (RP) metal halide perovskites are considered as promising optoelectronic materials due to their good environmental stability and desirable optoelectronic properties. However, the phase composition and ordering in the deposited film, with a fixed ratio of large organic spacer cation in the precursor solution, are hard to be further tailored for specific optoelectronic applications. Herein, it is shown that even with a fixed spacer cation ratio, the phase composition and ordering can still be largely regulated by utilizing different crystallization kinetics of various cations with the inorganic octahedral lead halide.

Photoelectrical Dynamics Uplift in Perovskite Solar Cells by Atoms Thick 2D TiS Layer Passivation of TiO Nanograss Electron Transport Layer.

A deficiency in the photoelectrical dynamics at the interface due to the surface traps of the TiO electron transport layer (ETL) has been the critical factor for the inferiority of the power conversion efficiency (PCE) in the perovskite solar cells. Despite its excellent energy level alignment with most perovskite materials, its large density of surface defect as a result of sub lattice vacancies has been the critical hurdle for an efficient photovoltaic process in the device. Here, we report that atoms thick 2D TiS layer grown on the surface of a (001) faceted and single-crystalline TiO nanograss (NG) ETL have effectively passivated the defects, boosting the charge extractability, carrier mobility, external quantum efficiency, and the device stability.

Super air stable quasi-2D organic-inorganic hybrid perovskites for visible light-emitting diodes.

Solution processed organic-inorganic hybrid perovskites are emerging as a new generation materials for optoelectronics. However, the electroluminescence is highly limited in light emitting diodes (LED) due to the low exciton binding energy and the great challenge in stability. Here, we demonstrate a super air stable quasi-two dimensional perovskite film employing hydrophobic fluorine-containing organics as barrier layers, which can store in ambient for more than 4 months with no change.

Lead-Free Organic-Inorganic Hybrid Perovskites for Photovoltaic Applications: Recent Advances and Perspectives.

Organic-inorganic hybrid halide perovskites (e.g., MAPbI ) have recently emerged as novel active materials for photovoltaic applications with power conversion efficiency over 22%.

Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion.

In recent years, organometal trihalide perovskites have emerged as promising materials for low-cost, flexible, and highly efficient solar cells. Despite their processing advantages, before the technology can be commercialized the poor stability of the organic-inorganic hybrid perovskite materials with regard to humidity, heat, light, and oxygen has be to overcome. Herein, we distill the current state-of-the-art and highlight recent advances in improving the chemical stability of perovskite materials by substitution of the A-cation and X-anion.