General synthesis of neighboring dual-atomic sites with a specific pre-designed distance via an interfacial-fixing strategy.

A potential non-precious metal catalyst for oxygen reduction reaction should contain metal-N moieties. However, most of the current strategies to regulate the distances between neighboring metal sites are not pre-designed but depend on the probability by tuning the metal loading or the support. Herein, we report a general method for the synthesis of neighboring metal-N moieties (metal = Fe, Cu, Co, Ni, Zn, and Mn) via an interfacial-fixing strategy.

Two-Step Design Rule for Simultaneously High Conductivity and Seebeck Coefficient in Conjugated Polymer-Based Thermoelectrics.

The trade-off between enhancing conductivity (σ) through doping while concurrently observing a reduction in the Seebeck coefficient (S) presents a key challenge in organic thermoelectrics. Here, a two-step structural design strategy is developed, where the first step enhances the backbone planarity which enhances the conductivity by an improved ordering of conjugated polymers (CPs). The second step, which is fluorination of the backbone, improves the Seebeck coefficient by the controlled induction of energetic disorder, stemming from the fluorine's disruption of the homogeneous electrostatic potential across the CP backbone.

Cascade Synthesis of Fe-N-Fe Dual-Atom Catalysts for Superior Oxygen Catalysis.

Dual-atom catalysts (DACs) have been proposed to break the limitation of single-atom catalysts (SACs) in the synergistic activation of multiple molecules and intermediates, offering an additional degree of freedom for catalytic regulation. However, it remains a challenge to synthesize DACs with high uniformity, atomic accuracy, and satisfactory loadings. Herein, we report a facile cascade synthetic strategy for DAC via precise electrostatic interaction control and neighboring vacancy construction.

Effects of serum proteins on corrosion rates and product bioabsorbability of biodegradable metals.

Corrodible metals are the newest kind of biodegradable materials and raise a new problem of the corrosion products. However, the removal of the precipitated products has been unclear and even largely ignored in publications. Herein, we find that albumin, an abundant macromolecule in serum, enhances the solubility of corrosion products of iron in blood mimetic Hank's solution significantly.

Numerical Simulation and Comparison of the Mechanical Behavior of Toughened Epoxy Resin by Different Nanoparticles.

Adding nanoparticles as the second phase to epoxy can achieve a good toughening effect. The aim of this paper is to simulate the toughening behavior of epoxy resin by different nanoparticles using a convenient and effective finite element method. The mechanical behaviors of epoxy resins toughened by nano core-shell polymers, liquid rubber, and nanosilica were compared by numerical simulations using the representative volume element (RVE).

Rapid production of kilogram-scale graphene nanoribbons with tunable interlayer spacing for an array of renewable energy.

Graphene nanoribbons (GNRs) are widely recognized as intriguing building blocks for high-performance electronics and catalysis owing to their unique width-dependent bandgap and ample lone pair electrons on both sides of GNR, respectively, over the graphene nanosheet counterpart. However, it remains challenging to mass-produce kilogram-scale GNRs to render their practical applications. More importantly, the ability to intercalate nanofillers of interest within GNR enables in-situ large-scale dispersion and retains structural stability and properties of nanofillers for enhanced energy conversion and storage.

Robust ring-opening reaction via asymmetrically coordinated Fe single atoms scaffolded by spoke-like mesoporous carbon nanospheres.

The ability to construct metal single-atom catalysts (SACs) asymmetrically coordinated with organic heteroatoms represents an important endeavor toward developing high-performance catalysts over symmetrically coordinated counterparts. Moreover, it is of key importance in creating supporting matrix with porous architecture for situating SACs as it greatly impacts the mass diffusion and transport of electrolyte. Herein, we report the crafting of Fe single atoms with asymmetrically coordinated nitrogen (N) and phosphorus (P) atoms scaffolded by rationally designed mesoporous carbon nanospheres (MCNs) with spoke-like nanochannels for boosting ring-opening reaction of epoxide to produce an array of pharmacologically important -amino alcohols.

Self-powered locomotion of a hydrogel water strider.

Hydrogels are an exciting class of materials for new and emerging robotics. For example, actuators based on hydrogels have impressive deformability and responsiveness. Studies into hydrogels with autonomous locomotive abilities, however, are limited.

Carbon/Sulfur Aerogel with Adequate Mesoporous Channels as Robust Polysulfide Confinement Matrix for Highly Stable Lithium-Sulfur Battery.

The ability to restrict the shuttle of lithium polysulfide (LiPS) and improve the utilization efficiency of sulfur represents an important endeavor toward practical application of lithium-sulfur (Li-S) batteries. Herein, we report the crafting of a robust 3D graphene-wrapped, nitrogen-doped, highly mesoporous carbon/sulfur (G-NHMC/S) hierarchical aerogel as an effective polysulfide confinement matrix for a highly stable Li-S battery. Rich polar sites of NHMC firmly anchor LiPS on the matrix surface.

Dynamic Mechanical Analysis on Delaminated Flax Fiber Reinforced Composites.

It is well-known that the presence of the delamination in a plant fiber-reinforced composite is difficult to detect. However, the delamination introduces a local flexibility, which changes the dynamic characteristics of the composite structure. This paper presents a new methodology for composite laminate delamination detection, which is based on dynamic mechanical analysis.

Effect of Temperature and Water Absorption on Low-Velocity Impact Damage of Composites with Multi-Layer Structured Flax Fiber.

Temperature and moisture can cause degradation to the impact properties of plant fiber-based composites owing to their complex chemical composition and multi-layer microstructure. This study focused on experimental characterization of the effect of important influencing factors, including manufacturing process temperature, exposure temperature, and water absorption, on the impact damage threshold and damage mechanisms of flax fiber reinforced composites. Firstly, serious reduction on the impact damage threshold and damage resistance was observed, this indicated excessive temperature can cause chemical decomposition and structural damage to flax fiber.

Slow-electron velocity-map imaging study of aniline via resonance-enhanced two-photon ionization method.

Slow electron velocity-map imaging (SEVI) of aniline has been investigated via two-color resonant-enhanced two-photo (1+1') ionization (2C-R2PI) method. A number of vibrational frequencies in the first excited state of neutral (S) and B ground electronic state of cation (D) have been accurately determined. In addition, photoelectron angular distributions (PADs) in the two-step transitions are presented and reveal a near threshold shape resonance in the ionization of aniline.

The design of double electrostatic-lens optics for resonance enhanced multiphoton ionization and photoelectron imaging experiments.

Compared to single ion/electron-optics for velocity-map imaging, a double-focusing lens assembly designed not only allows for mapping velocity imaging of photoelectrons but also allows for investigating the vibrational structure of the intermediate states of neutral species in resonance enhanced multiphoton ionization (REMPI) spectra. In this presentation, in order to record REMPI and photoelectron spectra separately, we have constructed a compact photoelectron velocity-map imaging (VMI) apparatus combined with an opposite linear Wiley-Mclaren time-of-flight mass spectrometer (TOFMS). A mass resolution (m/Δm) of ∼1300 for TOFMS and electron energy resolution (ΔE/E) of 2.

Note: A simple method to suppress the artificial noise for velocity map imaging spectroscopy.

A simple method has been proposed to suppress artificial noise from the counts with respect to the central line (or point) for the reconstructed 3D images with cylindrical symmetry in the velocity-map imaging spectroscopy. A raw 2D projection around the z-axis (usually referred to as central line) for photodetachment, photoionization, or photodissociation experiments is pre-processed via angular tailored method to avoid the signal counts distributed near the central line (or point). Two types of photoelectron velocity-map imaging (O(-) and Au(-)⋅NH3) are demonstrated to give rise to the 3D images with significantly reduced central line noise after pre-processing operation.

Enhancing the bioactivity of Poly(lactic-co-glycolic acid) scaffold with a nano-hydroxyapatite coating for the treatment of segmental bone defect in a rabbit model.

Purpose: Poly(lactic-co-glycolic acid) (PLGA) is excellent as a scaffolding matrix due to feasibility of processing and tunable biodegradability, yet the virgin scaffolds lack osteoconduction and osteoinduction. In this study, nano-hydroxyapatite (nHA) was coated on the interior surfaces of PLGA scaffolds in order to facilitate in vivo bone defect restoration using biomimetic ceramics while keeping the polyester skeleton of the scaffolds.

Methods: PLGA porous scaffolds were prepared and surface modification was carried out by incubation in modified simulated body fluids.

Physical modification of the interior surfaces of PLGA porous scaffolds using sugar fibers as template.

A three-dimensional (3D) poly(D,L-lactic-co-glycolic acid) porous scaffold with microgrooves and microholes on the pore walls was fabricated by using salt particulates as main porogens and sugar fibers as modifiers. Besides macropores templated from salt particulates, microgrooves and microholes were generated after leaching sugar fibers. The resultant porous scaffolds were of high porosity over 90% and still kept good mechanical properties.

Effective chemical oxidation on the structure of multiwalled carbon nanotubes.

A two-step chemical oxidation of multiwalled carbon nanotubes (MWCNTs) with different oxidation reagents was particularly studied. The reagents used in first step were the acidic mixture of sulfuric acid and nitric acid, and the reagents used in the second step were a mixture of sulfuric acid and hydrogen peroxide for different time. After each treatment, the functionalization yield of the oxygen-containing groups such as carboxylic group, hydroxyl functional groups and other functional groups on the surface of the carbon nanotubes (CNTs), was quantified by the analysis of XPS measurements.