Photoinduced Self-Gating of Perovskite Photovoltaic Cells in Ionic Liquid.

We demonstrate that the power conversion efficiency (PCE), photocurrent, and fill factor (FF) of perovskite solar cells (PSC) can be significantly improved by the photoinduced self-gating in ionic liquids (ILs) via n-doping of the carbon nanotube (CNT) top electrode on the fullerene electron transport layer (ETL). CNTs, graphene, and other carbon electrodes have been proven to be stable electrodes for PSC, but efficiency was not high. We have previously shown that the performance of PSCs with CNT electrodes can be improved by IL gating with gate voltage () applied from an external power source.

More Powerful Twistron Carbon Nanotube Yarn Mechanical Energy Harvesters.

Stretching a coiled carbon nanotube (CNT) yarn can provide large, reversible electrochemical capacitance changes, which convert mechanical energy to electricity. Here, it is shown that the performance of these "twistron" harvesters can be increased by optimizing the alignment of precursor CNT forests, plastically stretching the precursor twisted yarn, applying much higher tensile loads during precoiling twist than for coiling, using electrothermal pulse annealing under tension, and incorporating reduced graphene oxide nanoplates. The peak output power for a 1 and a 30 Hz sinusoidal deformation are 0.

Ionically Gated Small-Molecule OPV: Interfacial Doping of Charge Collector and Transport Layer.

We demonstrate an improvement in the performance of organic photovoltaic (OPV) systems based on small molecules by ionic gating via controlled reversible n-doping of multi-wall carbon nanotubes (MWCNTs) coated on fullerene electron transport layers (ETLs): C and C. Such electric double-layer charging (EDLC) doping, achieved by ionic liquid (IL) charging, allows tuning of the electronic concentration in MWCNTs and the fullerene planar acceptor layers, increasing it by orders of magnitude. This leads to the decrease of the series and increase of the shunt resistances of OPVs and allows use of thick (up to 200 nm) ETLs, increasing the durability of OPVs.

Enhanced Thermoelectric Properties of Poly(3-hexylthiophene) through the Incorporation of Aligned Carbon Nanotube Forest and Chemical Treatments.

Carbon nanotube/polymer composites have recently received considerable attention for thermoelectric (TE) applications. The TE power factor can be significantly improved by forming composites with carbon nanotubes. However, the formation of a uniform and well-ordered nanocomposite film is still challenging because of the creation of agglomerates and the uneven distribution of nanotubes.

Surface Energy-Driven Preferential Grain Growth of Metal Halide Perovskites: Effects of Nanoimprint Lithography Beyond Direct Patterning.

Hybrid organic-inorganic lead halide perovskites have attracted much attention in the field of optoelectronic devices because of their desirable properties such as high crystallinity, smooth morphology, and well-oriented grains. Recently, it was shown that thermal nanoimprint lithography (NIL) is an effective method not only to directly pattern but also to improve the morphology, crystallinity, and crystallographic orientations of annealed perovskite films. However, the underlining mechanisms behind the positive effects of NIL on perovskite material properties have not been understood.

Suppression of Electric Field-Induced Segregation in Sky-Blue Perovskite Light-Emitting Electrochemical Cells.

Inexpensive perovskite light-emitting devices fabricated by a simple wet chemical approach have recently demonstrated very prospective characteristics such as narrowband emission, low turn-on bias, high brightness, and high external quantum efficiency of electroluminescence, and have presented a good alternative to well-established technology of epitaxially grown III-V semiconducting alloys. Engineering of highly efficient perovskite light-emitting devices emitting green, red, and near-infrared light has been demonstrated in numerous reports and has faced no major fundamental limitations. On the contrary, the devices emitting blue light, in particular, based on 3D mixed-halide perovskites, suffer from electric field-induced phase separation (segregation).

Remote heteroepitaxy of GaN microrod heterostructures for deformable light-emitting diodes and wafer recycle.

There have been rapidly increasing demands for flexible lighting apparatus, and micrometer-scale light-emitting diodes (LEDs) are regarded as one of the promising lighting sources for deformable device applications. Herein, we demonstrate a method of creating a deformable LED, based on remote heteroepitaxy of GaN microrod (MR) - junction arrays on -AlO wafer across graphene. The use of graphene allows the transfer of MR LED arrays onto a copper plate, and spatially separate MR arrays offer ideal device geometry suitable for deformable LED in various shapes without serious device performance degradation.

Room-Temperature Lasing from Mie-Resonant Nonplasmonic Nanoparticles.

Subwavelength particles supporting Mie resonances underpin a strategy in nanophotonics for efficient control and manipulation of light by employing both an electric and a magnetic optically induced multipolar resonant response. Here, we demonstrate that monolithic dielectric nanoparticles made of CsPbBr halide perovskites can exhibit both efficient Mie-resonant lasing and structural coloring in the visible and near-IR frequency ranges. We employ a simple chemical synthesis with nearly epitaxial quality for fabricating subwavelength cubes with high optical gain and demonstrate single-mode lasing governed by the Mie resonances from nanocubes as small as 310 nm by the side length.

Polarons in Halide Perovskites: A Perspective.

Metal halide perovskites (MHPs) have rapidly emerged as leading contenders in photovoltaic technology and other optoelectronic applications owing to their outstanding optoelectronic properties. After a decade of intense research, an in-depth understanding of the charge carrier transport in MHPs is still an active topic of debate. In this Perspective, we discuss the current state of the field by summarizing the most extensively studied carrier transport mechanisms, such as electron-phonon scattering limited dynamics, ferroelectric effects, Rashba-type band splitting, and polaronic transport.

Electronic structure of CsPbBrCl perovskites: synthesis, experimental characterization, and DFT simulations.

All-inorganic lead halide perovskites of various compositions have emerged as a prospective family of materials for light-emitting devices and photonic applications. However, a comprehensive study of their structural and electronic properties is still missing. Moreover, thin film fabrication of these perovskites comprising heterohalide anions by wet chemistry approaches also remains challenging.

Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes.

Flexible, free-standing transparent conducting electrodes (TCEs) with simultaneously tunable transmittances up to 98% and sheet resistances down to 11 Ω/sq were prepared by a facile spray-coating method of silver nanowires (AgNWs) onto dry-spun multiwall carbon nanotube (MWNT) aerogels. Counterintuitively, the transmittance of the hybrid electrodes can be increased as the mass density of AgNWs within the MWNT aerogels increases; however, the final achievable transmittance depends on the initial transparency of the MWNT aerogels. Simultaneously, a strong decrease in sheet resistance is obtained when AgNWs form a percolated network along the MWNT aerogel.

Beyond quantum confinement: excitonic nonlocality in halide perovskite nanoparticles with Mie resonances.

Halide perovskite nanoparticles have demonstrated pronounced quantum confinement properties for nanometer-scale sizes and strong Mie resonances for 102 nm sizes. Here we studied the intermediate sizes where the nonlocal response of the exciton affects the spectral properties of Mie modes. The mechanism of this effect is associated with the fact that excitons in nanoparticles have an additional kinetic energy that is proportional to k2, where k is the wavenumber.

Low temperature atomic layer deposition of zirconium oxide for inkjet printed transistor applications.

We report the growth of zirconium oxide (ZrO) as a high- gate dielectric for an inkjet-printed transistor using a low-temperature atomic layer deposition (ALD) from tetrakis(dimethylamido)zirconium (TDMAZr) and water precursors. All the samples are deposited at low-temperature ranges of 150-250 °C. The films are very uniform with RMS roughness less than 4% with respect to their thickness.

A Few-Minute Synthesis of CsPbBr Nanolasers with a High Quality Factor by Spraying at Ambient Conditions.

Inorganic cesium lead halide perovskite nanowires, generating laser emission in the broad spectral range at room temperature and low threshold, have become powerful tools for the cutting-edge applications in the optoelectronics and nanophotonics. However, to achieve high-quality nanowires with the outstanding optical properties, it was necessary to employ long-lasting and costly methods of their synthesis, as well as postsynthetic separation and transfer procedures that are not convenient for large-scale production. Here we report a novel approach to fabricate high-quality CsPbBr nanolasers obtained by rapid precipitation from dimethyl sulfoxide solution sprayed onto hydrophobic substrates at ambient conditions.

Room-Temperature Continuous-Wave Operation of Organometal Halide Perovskite Lasers.

Solution-processed organic-inorganic lead halide perovskites have recently emerged as promising gain media for tunable semiconductor lasers. However, optically pumped continuous-wave lasing at room temperature, a prerequisite for a laser diode, has not been realized so far. Here, we report lasing action in a surface-emitting distributed feedback methylammonium lead iodide (MAPbI) perovskite laser on a silicon substrate at room temperature under continuous-wave optical pumping.

Tunable Hybrid Fano Resonances in Halide Perovskite Nanoparticles.

Halide perovskites are known to support excitons at room temperatures with high quantum yield of luminescence that make them attractive for all-dielectric resonant nanophotonics and meta-optics. Here we report the observation of broadly tunable Fano resonances in halide perovskite nanoparticles originating from the coupling of excitons to the Mie resonances excited in the nanoparticles. Signatures of the photon-exciton (" hybrid") Fano resonances are observed in dark-field spectra of isolated nanoparticles, and also in the extinction spectra of aperiodic lattices of such nanoparticles.

Photoactivated Mixed In-Plane and Edge-Enriched p-Type MoS Flake-Based NO Sensor Working at Room Temperature.

Toxic gases are produced during the burning of fossil fuels. Room temperature (RT) fast detection of toxic gases is still challenging. Recently, MoS transition metal dichalcogenides have sparked great attention in the research community due to their performance in gas sensing applications.

Continuous-wave operation in directly patterned perovskite distributed feedback light source at room temperature.

We report a directly patterned perovskite distributed feedback (DFB) resonator and show narrow amplified spontaneous emission (ASE) at pump powers as low as 0.1  W/cm under continuous-wave (CW) optical pumping conditions at room temperature. Compared to the pristine thin film photoluminescence spectrum, a 16-fold reduction in emission linewidth in the MAPbI DFB cavity was observed.

Light-Emitting Halide Perovskite Nanoantennas.

Nanoantennas made of high-index dielectrics with low losses in visible and infrared frequency ranges have emerged as a novel platform for advanced nanophotonic devices. On the other hand, halide perovskites are known to possess high refractive index, and they support excitons at room temperature with high binding energies and quantum yield of luminescence that makes them very attractive for all-dielectric resonant nanophotonics. Here we employ halide perovskites to create light-emitting nanoantennas with enhanced photoluminescence due to the coupling of their excitons to dipolar and multipolar Mie resonances.

Nanoimprinted perovskite metasurface for enhanced photoluminescence.

Recently, solution-processed hybrid halide perovskite has emerged as promising materials for advanced optoelectronic devices such as photovoltaics, photodetectors, light emitting diodes and lasers. In the mean time, all-dielectric metasurfaces with high-index materials have attracted attention due to their low-loss and high-efficient optical resonances. Because of its tunable by composition band gap in the visible frequencies, organolead halide perovskite could serve as a powerful platform for realizing high-index, low-loss metasurfaces.

Pristine carbon nanotube scaffolds for the growth of chondrocytes.

The effective growth of chondrocytes and the formation of cartilage is demonstrated on scaffolds of aligned carbon nanotubes; as two dimensional sheets and on three dimensional textiles. Raman spectroscopy is used to confirm the presence of chondroitin sulfate, which is critical in light of the unreliability of traditional dye based assays for carbon nanomaterial substrates. The textile exhibits a very high affinity for chondrocyte growth and could present a route to implantable, flexible cartilage scaffolds with tuneable mechanical properties.

Biophysical interactions between pancreatic cancer cells and pristine carbon nanotube substrates: Potential application for pancreatic cancer tissue engineering.

Novel synthetic biomaterials able to support direct tissue growth and retain cellular phenotypical properties are promising building blocks for the development of tissue engineering platforms for accurate and fast therapy screening for cancer. The aim of this study is to validate an aligned, pristine multi-walled carbon nanotube (CNT) platform for in vitro studies of pancreatic cancer as a systematic understanding of interactions between cells and these CNT substrates is lacking. Our results demonstrate that our CNT scaffolds-which are easily tuneable to form sheets/fibers-support growth, proliferation, and spatial organization of pancreatic cancer cells, indicating their great potential in cancer tissue engineering.

Polar-Electrode-Bridged Electroluminescent Displays: 2D Sensors Remotely Communicating Optically.

A novel geometry for electroluminescent devices, which does not require transparent electrodes for electrical input, is demonstrated, theoretically analyzed, and experimentally characterized. Instead of emitting light through a conventional electrode, light emission occurs through a polar liquid or solid and input electrical electrodes are coplanar, rather than stacked in a sandwich configuration. This new device concept is scalable and easily deployed for a range of modular alternating-current-powered electroluminescent light sources and light-emitting sensing devices.

Solvent Toolkit for Electrochemical Characterization of Hybrid Perovskite Films.

Organohalide lead (hybrid) perovskites have emerged as competitive semiconducting materials for photovoltaic devices due to their high performance and low cost. To further the understanding and optimization of these materials, solution-based methods for interrogating and modifying perovskite thin films are needed. In this work, we report a hydrofluoroether (HFE) solvent-based electrolyte for electrochemical processing and characterization of organic-inorganic trihalide lead perovskite thin films.