Construction and Demolition Waste as Recycled Aggregates in Alkali-Activated Concretes.

The growth of global construction has contributed to an inevitable increase in the amount of construction and demolition (C&D) waste, and the recycling of C&D waste as aggregates in concrete is receiving increased interest, resulting in less demand for normal aggregates and bringing a potential solution for the landfilling of wastes. Recently, several studies have focused on the use of C&D waste in alkali-activated concrete to move one step closer to sustainable concretes. This paper focuses on the main mechanisms of using C&D waste in the resulting physical, mechanical, and durability properties of alkali-activated concrete in fresh and hardened state properties.

Production of Lightweight Alkali Activated Mortars Using Mineral Wools.

This experimental study aimed to develop a fiber-reinforced lightweight mineral wool-based alkali activated mortar. The lightweight mineral wool-based alkali activated mortars were produced using premade foam and reinforced by polypropylene (PP) fibers. They were assessed in terms of fresh and hardened-state properties.

Using Carbonated BOF Slag Aggregates in Alkali-Activated Concretes.

This experimental study aimed to develop alkali-activated concretes containing carbonated basic oxygen furnace (BOF) slag aggregates. In the first stage, the impacts of replacing normal aggregates with carbonated BOF slag aggregates in different alkali-activated concretes were determined by assessing mechanical properties (compressive and flexural strengths), morphology, thermogravimetric analyses (TGA), differential thermogravimetry (DTG) and the crystalline phases using X-ray diffraction analysis. Second, the developed plain alkali-activated concrete was reinforced by different fibre types and dosages to limit the negative impacts of the drying shrinkage and to improve strength.

Impacts of Casting Scales and Harsh Conditions on the Thermal, Acoustic, and Mechanical Properties of Indoor Acoustic Panels Made with Fiber-Reinforced Alkali-Activated Slag Foam Concretes.

This paper presents experimental results regarding the efficiency of using acoustic panels made with fiber-reinforced alkali-activated slag foam concrete containing lightweight recycled aggregates produced by using Petrit-T (tunnel kiln slag). In the first stage, 72 acoustic panels with dimension 500 × 500 × 35 mm were cast and prepared. The mechanical properties of the panels were then assessed in terms of their compressive and flexural strengths.