The Pd3(dppm)3(CO)n clusters (n = 1-,2-); rare cases of anionic palladium species.

Two novel anionic palladium clusters, Pd(3)(dppm)(3)(CO)(n-) (Pd(3)(n); n = 1-,2-) were electrochemically generated from the dicationic cluster Pd(3)(2+) in 0.2 M THF/Bu(4)NPF(6)via two first consecutive reversible 1-electron reductions (Pd(3)(2+) + 1 e(-) ⇌ Pd(3)(+), -0.210, and Pd(3)(+) + 1 e(-) ⇌ Pd(3)(0), -0.

The first unpaired electron placed inside a C3-symmetry P-chirogenic cluster.

The Pd(3)(dppm*)(3)(CO)(n+) enantiomers (n = 2 (2), 1 (3)) were prepared either from (R,R)- or (S,S)-P-chirogenic bis(phenyl-m-xylylphosphino)methane (dppm*; 1) and Pd(OAc)(2) in the presence of CF(3)CO(2)H, CO and water (n = 2), and then by reductive electrolysis (n = 1). The stable enantiomeric [Pd(3)((S,S)-dppm*)(3)(CO)](+)˙ (3), is the first C(3)-symmetry radical-cation M-M bonded cluster, therefore the odd electron is delocalized onto the Pd(3) frame within this symmetry. The novel chiral species have been characterized by circular dichroism (CD) of both enantiomers of the Pd(3)(dppm*)(3)(CO)(2+) clusters (2) and by EPR spectroscopy for the Pd(3)((S,S)-dppm*)(3)(CO)(+)˙ paramagnetic compounds (3, g = 2.

Exploring the redox reactivity of magnesium porphine. Insight into the origins of electropolymerisation.

Magnesium(II) porphine, MgP (1), was synthesised according to the Lindsey procedure allowing to isolate and crystallise 1-formyldipyrromethane (2) as a synthetic intermediate. Unprecedented X-ray diffraction studies revealed multiple intermolecular associations in the crystal between neighbouring units of 2, namely hydrogen bonds and CH..

Symmetric heteropolynuclear Ti(IV)/Cu(I) complexes exhibiting stepwise electrochemical reductions to Ti(III) species.

The heterotrinuclear complexes, [(CpTiCl(2)Cp-PPh(2))(2)Cu](+) (2) (as PF(6)(-) salt) and [CpTiCl(2)Cp-PPh(2)](2)CuCl (3), containing two electron-poor Ti(IV) fragments and one electron-rich Cu(I) center, and a tetrametallic species, [(CpTiCl(2)Cp-PPh(2))Cu(mu-Cl)](2) (4), were synthesized and characterized. The trinuclear nature of 2 and 3 was demonstrated by X-ray crystallography for which the three metallic centers are held together by two CpPPh(2) ligands. Weak Cl.

Generation, characterization, and electrochemical behavior of the palladium-hydride cluster [Pd3(dppm)3(mu3-CO)(mu3-H)]+ (dppm=Bis(diphenylphosphinomethane).

Addition of formate on the dicationic cluster [Pd(3)(dppm)(3)(mu(3)-CO)](2+) (dppm=bis(diphenylphosphinomethane) affords quantitatively the hydride cluster [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+). This new palladium-hydride cluster has been characterised by (1)H NMR, (31)P NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry. The unambiguous identification of the capping hydride was made from (2)H NMR spectroscopy by using DCO(2) (-) as starting material.

Thermal and electrochemically assisted Pd-Cl bond cleavage in the d9-d9 Pd2dppm2Cl2 complex by Pd3 dppm3COn+ clusters (n = 2, 1, 0).

A new aspect of reactivity of the cluster [Pd3(dppm)3(micro3-CO)]n+, ([Pd3]n+, n = 2, 1, 0) with the low-valent metal-metal-bonded Pd2(dppm)2Cl2 dimer (Pd2Cl2) was observed using electrochemical techniques. The direct reaction between [Pd3]2+ and Pd2Cl2 in THF at room temperature leads to the known [Pd3(dppm)3(micro3-CO)(Cl)]+ ([Pd3(Cl)]+) adduct and the monocationic species Pd2(dppm)2Cl+ (very likely as Pd2(dppm)2(Cl)(THF)+, [Pd2Cl]+) as unambiguously demonstrated by UV-vis and 31P NMR spectroscopy. In this case, [Pd3]2+ acts as a strong Lewis acid toward the labile Cl- ion, which weakly dissociates from Pd2Cl2 (i.

Electron-sponge behavior and electronic structures in cobalt-centered pentagonal prismatic Co11Te7(CO)10 and Co11Te5(CO)15 cluster anions.

The novel cluster anion [Co(11)Te(5)(CO)15]- ([3]-) has been isolated and structurally characterized as part of the salt [Cp*(2)Nb(CO)2][3] (Cp* = C(5)Me(5)). The cobalt-centered Co10 pentagonal prism is surrounded by a shell of two mu5-Te, three mu4-Te ligands, and 15 CO groups in terminal, symmetrical, and sigma-semibridging bonding modes. The hybrid carbonyl-telluride character of the ligand shell is reflected in the solid state by a one-dimensional assembly of polyhedral prisms along a backbone of [Cp*(2)Nb(CO)2]+ cations.

Unexpected reaction of the unsaturated cluster host and catalyst [Pd3(mu3-CO)(dppm)3]2+ with the hydroxide ion: spectroscopic and kinetic evidence of an inner-sphere mechanism.

The title cluster, [Pd(3)(mu(3)-CO)(dppm)(3)](2+) (dppm=bis(diphenylphosphino)methane), reacts with one equivalent of hydroxide anions (OH(-)), from tetrabutylammonium hydroxide (Bu(4)NOH), to give the paramagnetic [Pd(3)(mu(3)-CO)(dppm)(3)](+) species. Reaction with another equivalent of OH(-) leads to the zero-valent compound [Pd(3)(mu(3)-CO)(dppm)(3)](0). From electron paramagnetic resonance analysis of the reaction medium using the spin-trap agent 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), the 2-tetrahydrofuryl or methyl radicals, deriving from the tetrahydrofuran (THF) or dimethyl sulfoxide (DMSO) solvent, respectively, were detected.

Chemistry and electrochemistry of the heterodinuclear complex ClPd(dppm)2PtCl: a M-M' bond providing site selectivity.

The heterodinuclear d(9)-d(9) title compound 1, whose crystal structure has been solved, reacts with dppm [bis(diphenylphosphino)methane] in the presence of NaBF4 to generate the salt [ClPd(mu-dppm)2Pt(eta(1)-dppm)][BF4] (2a), which contains a Pt-bound dangling dppm ligand. 2a has been characterized by 1H and 31P NMR, Fourier transform Raman [nu(Pd-Pt) = 138 cm(-1)], and UV-vis spectroscopy [lambda(max)(dsigma-dsigma*) = 366 nm]. In a similar manner, [ClPd(mu-dppm)2Pt(eta(1)-dppm=O)][BF4] (2b), ligated with a dangling phosphine oxide, has been prepared by the addition of dppm=O.

The Pd(4)(dppm)(4)(H)(2)(2+) cluster: a precatalyst for the homogeneous hydrogenation of alkynes.

The catalytic properties of the title cluster toward the homogeneous hydrogenation of phenylacetylene, diphenylethyne and phenyl-1-propyne have been investigated as a function of temperature, pressure, solvents, substrate and cluster concentrations, and counterions. The title cluster is a precatalyst that exhibits a good catalytic activity under mild conditions (1 atm of H(2) at 20 degrees C) for the hydrogenation of alkynes and alkenes. For the alkyne substrates, the turnover frequencies (tof's) range between 200 and 500 h(-)(1), and the product distribution varies as: cis-products, 75-90%; trans-products; 0-8% after 3 h of reaction.

Preparative and electrochemical investigations on the electron sponge behavior of cobalt telluride clusters: CO substitution in [Co11Te7(CO)10]n- ions (n=1, 2) by PMe2Ph and crystal structure of [Co11Te7(CO)5(PMe2Ph)5].

The reaction of the cluster salts [Cp(2*) Nb(CO)(2)](n)[Co(11)Te(7)(CO)(10)] (Cp*=C(5)Me(5); n=1, 2) with excess PMe(2)Ph gave the neutral, dark brown clusters [Co(11)Te(7)(CO)(6)(PMe(2)Ph)(4)] (5) and [Co(11)Te(7)(CO)(5)(PMe(2)Ph)(5)] (6) with 147 metal valence electrons. The new compounds were characterized by IR spectroscopy, elemental analyses, and mass spectrometry. The molecular structure of 6 was determined by X-ray crystallography.

Stoichiometric and catalytic activation of the alpha- and beta-2,3,4-tri-O-acetyl-5-thioxylopyranosyl bromide inside the cavity of the Pd3(dppm)3(CO)2+ cluster.

The title cluster (Pd(3)(2+)) exhibits a pronounced affinity for Br(-) ions to form the very stable Pd(3)(Br)(+) adduct. Upon a 2-electron reduction, a dissociative process occurs generating Pd(3)(0) and eliminating Br(-) according to an ECE mechanism (electrochemical, chemical, electrochemical). At a lower temperature (i.

New efficient electrochemical synthesis of 1,5-dithioxylopyranosides in the presence of a sacrificial anode.

Electroreduction of the disulfide derivative RSSR (5, R= [bond]C(6)H(4)[bond]CO[bond]C(6)H(4)[bond]CN) on a mercury pool or a carbon gauze electrode in the presence of 2,3,4-tri-O-acetyl-5-thio-D-xylopyranosyl bromide (1), using a sacrificial zinc anode gave an alpha,beta anomeric mixture of [4-(4-cyanobenzoylphenyl)] 2,3,4-tri-O-acetyl-1,5-dithio-D-xylopyranoside (6) in 40-70% yield, according to the experimental conditions used (nature of solvent, electrolyte salt, and temperature). High selectivity favouring the alpha anomer of 6 is observed starting from the alpha anomer of 1. Mechanistic aspects are discussed.

Thermal and electrochemical C-X activation (X = Cl, Br, I) by the strong Lewis acid Pd3(dppm)3(CO)2+ cluster and its catalytic applications.

The stoichiometric and catalytic activations of alkyl halides and acid chlorides by the unsatured Pd(3)(dppm)(3)(CO)(2+) cluster (Pd(3)(2+)) are investigated in detail. A series of alkyl halides (R-X; R = t-Bu, Et, Pr, Bu, allyl; X = Cl, Br, I) react slowly with Pd(3)(2+) to form the corresponding Pd(3)(X)(+) adduct and "R(+)". This activation can proceed much faster if it is electrochemically induced via the formation of the paramagnetic species Pd(3)(+).

The Pd3(dppm)3(CO)2+ cluster: an efficient electrochemically assisted Lewis acid catalyst for the fluorination and alcoholysis of acyl chlorides.

The dicationic palladium cluster Pd3(dppm)3(CO)2+ (dppm = bis(diphenylphosphino)methane) reacts with acid chlorides RCOCl (R = n-C6H13, t-Bu, Ph) to afford quantitatively the chloride adduct Pd3(dppm)3(CO)(Cl)+ and the acyl cation RCO+ as the organic counterpart. The dicationic reactive cluster can be reformed by electrolyzing the chloride complex with a copper anode leaving CuCl as a byproduct. The combination of these two reactions provides an electrocatalytic way to form the acylium from the acid chloride.

Thermodynamic and kinetic control over the reduction mechanism of the Pd(3)(dppm)(3)(CO)(I)(+) cluster.

The reduction mechanism of the title cluster has been investigated by means of cyclic voltammetry (CV), rotating disk electrode (RDE) voltammetry, and coulometry. The 2-electron reduction proceeds via two routes simultaneously. The first one involves two 1-electron reduction steps, followed by an iodide elimination to form the neutral Pd(3)(dppm)(3)(CO)(0) cluster (EEC mechanism).