Characterization of a perfect sinusoidal grating profile using an artificial neural network for plasmonic-based sensors.

In this paper, we present a system intended to detect a targeted perfect sinusoidal profile of a diffraction grating during its manufactured process. Indeed, the sinusoidal nature of the periodic structure is essential to ensure optimal efficiency of specific applications as plasmonic sensors (surface plasmon resonance -based sensors). A neural network is implemented to characterize the geometrical shape of the structure under testing at the end of the laser interference lithography process.

Performance of Grating Couplers Used in the Optical Switch Configuration.

Surface plasmon resonance is an effect widely used for biosensing. Biosensors based on this effect operate in different configurations, including the use of diffraction gratings as couplers. Gratings are highly tunable and are easy to integrate into a fluidic system due to their planar configuration.

Common-mode plasmon sensing scheme as a high-sensitivity compact SPR sensor.

A deep metal grating enables quasi-phase-matched simultaneous excitation of two counterpropagating surface plasmon modes by means of its +1st and -2nd diffraction orders. The resulting angular reflection spectra of the scattered -1st and zeroth orders exhibit three interleaved zeros and maxima in a range centered around the Littrow angle. The spectra differ thoroughly from the usual reflection dip resulting from single-order plasmon coupling that produces strong absorption.

A chiral microchip laser using anisotropic grating mirrors for single mode emission.

A pair of nanostructured mirrors made of a diffraction grating inscribed in the top layer of a Bragg mirror are designed such that a phase shift near π and different reflected amplitudes exist between transverse electric (TE) and magnetic (TM) reflected polarization states at normal incidence. When a standing wave laser resonator is formed with two such mirrors and the two mirrors' principal axes are twisted one with respect to the other, this phase shift condition suppresses multiple longitudinal mode emission arising from axial spatial hole burning. In addition, the different amplitudes of TE and TM reflected polarizations create polarization eigenstates with different round-trip losses, suppressing one polarization eigenstate.

Differential Sensing with Replicated Plasmonic Gratings Interrogated in the Optical Switch Configuration.

A new plasmonic configuration is proposed for application in a sensor and demonstrated for the detection of variations in the bulk refractive index of solutions. The configuration consists of monitoring two diffracted orders resulting from the interaction of a TM-polarized optical beam incident on a grating coupler, operating based on an effect termed the "optical switch". The two monitored diffracted orders enable differential measurements which cancel the drift and perturbations common to both, leading to an improved detection limit, as demonstrated experimentally.

Metal-coated concave cone in a fused-silica rod as a multi-function plasmonic element.

A collimated light beam parallel to the axis of a fused-quartz cylinder impinging on a 90° apex angle concave cone cut in a quartz rod is transformed into a cylindrical wave by total internal reflection. A thin metal film at the quartz-air interface enables excitation of the plasmon mode at the air side that can polarize the cylindrical wave and/or has the potential to monitor physical, chemical, or biological quantities or events at the inner wall of the cone. The present Letter first analyzes the plasmon coupling mechanism and conditions.

Versatile Zirconium Oxide (ZrO) Sol-Gel Development for the Micro-Structuring of Various Substrates (Nature and Shape) by Optical and Nano-Imprint Lithography.

Zirconium oxide (ZrO) is a well-studied and promising material due to its remarkable chemical and physical properties. It is used, for example, in coatings for corrosion protection layer, wear and oxidation, in optical applications (mirror, filters), for decorative components, for anti-counterfeiting solutions and for medical applications. ZrO can be obtained as a thin film using different deposition methods such as physical vapor deposition (PVD) or chemical vapor deposition (CVD).

Influence of the Micro-Nanostructuring of Titanium Dioxide Films on the Photocatalytic Degradation of Formic Acid under UV Illumination.

Surface micro-nanostructuring can provide new functionalities and properties to coatings. For example, it can improve the absorption efficiency, hydrophobicity and/or tribology properties. In this context, we studied the influence of micro-nanostructuring on the photocatalytic efficiency of sol-gel TiO coatings during formic acid degradation under UV illumination.

A versatile technology for colloidal crystal transfer using parylene coatings and hydrosoluble polymers.

We propose a novel versatile colloidal crystal transfer technique compatible with a wide range of water-insoluble substrates regardless of their size, material, and wettability. There are no inherent limitations on colloidal particles material and size. The method possibilities are demonstrated via the colloidal transfer on quartz, glass substrates with a flat and curved surface, and via the fabrication of 3D colloidal structure with 5 overlaid colloidal monolayers.

Effect of roughness on surface plasmons propagation along deep and shallow metallic diffraction gratings.

The roughness of shallow or deep metallic diffraction gratings modifies the propagation of surface plasmon mode along the metallic-air interface. The scattering losses lead to a spectral or angular broadening of the surface plasmon resonance (SPR) and to a shift of the resonance wavelength and coupling angle. This mechanism is deeply analyzed both experimentally and theoretically to overcome these effects when such structures, in particular deep ones, are used as SPR-based sensors.

Impact of γ-rays Irradiation on Hybrid TiO-SiO Sol-Gel Films Doped with RHODAMINE 6G.

In the present paper, we investigate how the optical and structural properties, in particular the observed photoluminescence (PL) of photocurable and organic-inorganic TiO-SiO sol-gel films doped with Rhodamine 6G (R6G) are affected by γ-rays. For this, four luminescent films, firstly polymerized with UV photons (365 nm), were submitted to different accumulated doses of 50 kGy, 200 kGy, 500 kGy and 1 MGy while one sample was kept as a reference and unirradiated. The PL, recorded under excitations at 365 nm, 442 nm and 488 nm clearly evidences that a strong signal peaking at 564 nm is still largely present in the γ-irradiated samples.

Compensation of disorder for extraordinary optical transmission effect in nanopore arrays fabricated by nanosphere photolithography.

The work considers the effect of extraordinary optical transmission (EOT) in polycrystalline arrays of nanopores fabricated via nanosphere photolithography (NPL). The use of samples with different qualities of polycrystalline structure allows us to reveal the role of disorder for EOT. We propose a phenomenological model which takes the disorder into account in numerical simulations and validate it using experimental data.

Comparison between the UV and X-ray Photosensitivities of Hybrid TiO-SiO Thin Layers.

The photo-induced effects on sol-gel-based organo TiO-SiO thin layers deposited by the dip-coating technique have been investigated using two very different light sources: A light-emitting diode (LED) emitting in the UV (at 365 nm, 3.4 eV) and an X-ray tube producing 40 keV mean-energy photons. The impact of adding a photo-initiator (2,2-dimethoxy-2-phenylacetophenone-DMPA) on the sol-gel photosensitivity is characterized namely in terms of the photo-induced refractive index measured through M-line spectroscopy.

Enhancement of Both Faraday and Kerr Effects with an All-Dielectric Grating Based on a Magneto-Optical Nanocomposite Material.

We report on the design, fabrication, and characterization of an all-dielectric one-dimensional (1D) resonant device formed by a silicon nitride grating impregnated by a low-index magneto-optical silica-type matrix. This impregnation is realized through the dipping of the 966 nm periodic template in a sol-gel solution previously doped with CoFeO nanoparticles, and able to fill the grating slits. By a proper adjustment of the geometrical parameters of such a photonic crystal membrane, simultaneous excitation of transverse electric (TE) and transverse magnetic (TM) polarization resonances is nearly achieved at 1570 nm.

Systematic study of resonant transmission effects in visible band using variable depth gratings.

The article focuses on depth-dependent visible band transmission effects in a symmetrical "insulator-metal-insulator" diffraction system based on a variable depth grating. These effects were studied both experimentally and theoretically in TM and TE polarizations. In particular, the existence of an optimized grating depth for plasmon-mediated resonant transmission was confirmed experimentally, and differences in TE and TM transmission behavior are discussed.

Surface Plasmon Resonance Based Temperature Sensors in Liquid Environment.

The aim of this work is to measure the temperature variations by analyzing the plasmon signature on a metallic surface that is periodically structured and immersed in a liquid. A change in the temperature of the sample surface induces a modification of the local refractive index leading to a shift of the surface plasmon resonance (SPR) frequency due to the strong interaction between the evanescent electric field and the metallic surface. The experimental set-up used in this study to detect the refractive index changes is based on a metallic grating permitting a direct excitation of a plasmon wave, leading to a high sensibility, high-temperature range and contactless sensor within a very compact and simple device.

Direct S-matrix calculation for diffractive structures and metasurfaces.

The paper presents a derivation of analytical components of S matrices for arbitrary planar diffractive structures and metasurfaces in the Fourier domain. The attained general formulas for S-matrix components can be applied within both formulations in the Cartesian and curvilinear metric. A numerical method based on these results can benefit from all previous improvements of the Fourier domain methods.

Condensation phenomenon detection through surface plasmon resonance.

The aim of this work is to optically detect the condensation of acetone vapor on an aluminum plate cooled down in a two-phase environment (liquid/vapor). Sub-micron period aluminum based diffraction gratings with appropriate properties, exhibiting a highly sensitive plasmonic response, were successfully used for condensation experiments. A shift in the plasmonic wavelength resonance has been measured when acetone condensation on the aluminum surface takes place due to a change of the surrounding medium close to the surface, demonstrating that the surface modification occurs at the very beginning of the condensation phenomenon.

Microstructuring of Mesoporous Titania Films Loaded with Silver Salts to Enhance the Photocatalytic Degradation of Methyl Blue under Visible Light.

The microstructuring of the distribution of silver nanoparticles (NPs) in mesoporous titania films loaded with silver salts, using two-beam interference lithography leading to 1 Dimension (1D) grating, induces variations in the photocatalytic efficiency. The influence of the structuration was tested on the degradation of methyl blue (MB) under ultraviolet (UV) and visible illumination, giving rise to a significant improvement of the photocatalytic efficiency. The periodic distribution of the NPs was characterized by transmission electron microscopy (TEM), high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and scanning electron microscopy (SEM).

Periodic TiO₂ Nanostructures with Improved Aspect and Line/Space Ratio Realized by Colloidal Photolithography Technique.

This paper presents substantial improvements of the colloidal photolithography technique (also called microsphere lithography) with the goal of better controlling the geometry of the fabricated nano-scale structures-in this case, hexagonally arranged nanopillars-printed in a layer of directly photopatternable sol-gel TiO₂. Firstly, to increase the achievable structure height the photosensitive layer underneath the microspheres is deposited on a reflective layer instead of the usual transparent substrate. Secondly, an increased width of the pillars is achieved by tilting the incident wave and using multiple exposures or substrate rotation, additionally allowing to better control the shape of the pillar's cross section.

Direct nanopatterning of 100 nm metal oxide periodic structures by Deep-UV immersion lithography.

Deep-UV lithography using high-efficiency phase mask has been developed to print 100 nm period grating on sol-gel based thin layer. High efficiency phase mask has been designed to produce a high-contrast interferogram (periodic fringes) under water immersion conditions for 244 nm laser. The demonstration has been applied to a new developed immersion-compatible sol-gel layer.

100 nm period grating by high-index phase-mask immersion lithography.

The interferogram of a high index phase mask of 200 nm period under normal incidence of a collimated beam at 244 nm wavelength with substantially suppressed zeroth order produces a 100 nm period grating in a resist film under immersion. The paper describes the phase mask design, its fabrication, the effect of electron-beam lithographic stitching errors and optical assessment of the fabricated sub-cutoff grating.

Miniature holistic displacement sensor by immersion diffractive interferometry.

High interference contrast is obtained in a miniature dual-grating transmission displacement sensor submitted to an essentially uniform light flood of arbitrary polarization with multifunctional liquid film between gratings.