Enhanced selective enrichment of partial nitritation and anammox bacteria in a novel two-stage continuous flow system using flat-type poly (vinylalcohol) cryogel films.

To improve stability of nitrogen removal in partial nitritation (PN)-anammox process, flat-type cryogel films using poly (vinylalcohol) named as FT-CPVAF were applied in continuous reactors. Stable PN operation was maintained with short acclimation of 8 days and ammonium oxidation rate of 1.68 ± 0.

Effective seeding strategy using flat type poly (vinyl alcohol) cryogel for anammox enrichment.

In this study, anammox enrichment reactors were operated using flat type poly (vinyl alcohol) cryogel (cryoPVAG) with precultured anammox bacteria (PAB) and activated sludge (AS) from an anoxic tack of the A2O process to evaluate the effect of different seeding sources on anammox enrichment. In addition, cryoPVAGs with different thicknesses (1, 2, and 3 mm) were used to investigate the effects of the thickness on anammox enrichment. The regression analysis with a modified Gompertz model showed that the start-up period of the anammox enrichment using PAB inoculum was approximately 14 days earlier than that of AS inoculum at a nitrogen loading rate of approximately 1 kg-N m day.

Effects of the ammonium loading rate on nitrite-oxidizing activity during nitrification at a high dose of inorganic carbon.

In this study, the effects of the ammonium loading rate (ALR) and inorganic carbon loading rate (ILR) on the nitrification performance and composition of a nitrifying bacterial community were investigated in a moving bed biofilm reactor, using poly(vinyl alcohol) (PVA) sponge cubes as a supporting carrier. Between the two ALRs of 0.36 and 2.

Assessment of bacterial community structure in nitrifying biofilm under inorganic carbon-sufficient and -limited conditions.

In this work, nitrification and changes in the composition of the total bacterial community under inorganic carbon (IC)-limited conditions, in a nitrifying moving bed biofilm reactor, was investigated. A culture-independent analysis of cloning and sequencing based on the 16S rRNA gene was applied to quantify the bacterial diversity and to determine bacterial taxonomic assignment. IC concentrations had significant effects on the stability of ammonia-oxidation as indicated by the reduction of the nitrogen conversion rate with high NH4(+)-N loadings.

Photocatalytic applications of paper-like poly(vinylidene fluoride)-titanium dioxide hybrids fabricated using a combination of electrospinning and electrospraying.

A paper-like photocatalyst was fabricated by electrospraying an N,N'-dimethylformamide (DMF) dispersion of titanium dioxide (TiO2) nanoparticles (NPs) on a poly(vinylidene fluoride) nanofiber (PVDF NF) mat prepared by electrospinning. Morphological studies revealed that the TiO2 NPs uniformly deposited as clusters on the surface of the PVDF NF mat. The immobilized amount of TiO2 was found to be 2.

High-rate partial nitritation using porous poly(vinyl alcohol) sponge.

Poly(vinyl alcohol) (PVA) has been utilized as a support material for the immobilization of nitrifying bacteria without the comprehensive survey of partial nitritation. In the present study, the activities of nitrifiers and the maximum nitrogen conversion rate of partial nitritation with PVA sponge-cubes were specified according to different conditions. The selective enrichment of ammonia-oxidizing bacteria (AOB) on PVA sponge-cubes was achieved by the competition between AOB and nitrite-oxidizing bacteria for dissolved oxygen.

Enhanced ammonia nitrogen removal using consistent biological regeneration and ammonium exchange of zeolite in modified SBR process.

The modified zeo-SBR is recommended for a new nitrogen removal process that has a special function of consistent ammonium exchange and bioregeneration of zeolite-floc. Three sets of sequencing batch reactors, control, zeo-SBR, and modified zeo-SBR were tested to assess nitrogen removal efficiency. The control reactor consisted of anoxic-fill, aeration-mixing, settling, and decanting/idle phases, meaning that nitrogen removal efficiency was dependent on the decanting volume in a cycle.

Study of nitrogen and organics removal in sequencing batch reactor (SBR) using hybrid media.

The removal of nitrogen and organics in a sequencing batch reactor (SBR) using hybrid media were investigated in this work. The hybrid media was made by the use of polyurethane foam (PU) cubes and powdered activated carbon (PAC). The function of activated carbon of hybrid media was to offer a suitable active site, which was able to absorb organic substances and ammonia, as well as that of PU was to provide an appropriated surface onto which biomass could be attached and grown.

Effect of acidity consumption/production on the pH of aeration tank during the biodegradation of acetic acid/epichlorohydrin.

In order to elucidate the biologically driven pH fluctuation phenomena in industrial wastewater treatment, the contrary effects of acetic acid (AA) and epichlorohydrin (ECH) on the pH of aeration tank were investigated. Two simple equations were derived to estimate optimum neutralization pHs for the biological AA/ECH wastewater treatment, and the calculated optimum neutralization pHs were compared with experimental results. The pH in aeration tank was expected to fluctuate sharply with the smallest deviation of neutralization pH from the optimum value.

Use of coagulant and zeolite to enhance the biological treatment efficiency of high ammonia leachate.

Most landfill leachates in Korea, herein defined as the contaminated liquid resulting from the percolation of water through a landfill, are high in ammonium nitrogen, which inhibits biological treatment processes and deteriorates rivers. A laboratory experiment investigated the effect of pre-removal of ammonium nitrogen using zeolite on the efficiency of organic treatment of the following activated-sludge process. Ferric chloride was initially used as a coagulant for solids removal.