Electro-coalescence in step emulsification: dynamics and applications.

Step emulsification is a low-shear method to produce monodispersed microdroplets by spontaneous breakup of dispersed fluid at a spatial "step". As a semi-open microfluidic system, controllable coalescence of multiple components in step emulsification has not been achieved. Here, we use a low voltage to control the coalescence position of flow tips in the terrace.

Optimized aeration strategies for nitrogen removal efficiency: application of end gas recirculation aeration in the fixed bed biofilm reactor.

Aeration strategy played an important role in reactor performance. In this study, when superficial upflow air velocity (SAV) decreased from 0.16 to 0.

The impact of DO and salinity on microbial community in poly(butylene succinate) denitrification reactors for recirculating aquaculture system wastewater treatment.

The interactions between environmental factors and bacterial community shift in solid-phase denitrification are crucial for optimum operation of a reactor and to achieve maximum treatment efficiency. In this study, Illumina high-throughput sequencing was applied to reveal the effects of different operational conditions on bacterial community distribution of three continuous operated poly(butylene succinate) biological denitrification reactors used for recirculating aquaculture system (RAS) wastewater treatment. The results indicated that salinity decreased OTU numbers and diversity while dissolved oxygen (DO) had no obvious influence on OTU numbers.

Simultaneous ammonia and nitrate removal in an airlift reactor using poly(butylene succinate) as carbon source and biofilm carrier.

In this study, an airlift inner-loop sequencing batch reactor using poly(butylene succinate) as the biofilm carrier and carbon source was operated under an alternant aerobic/anoxic strategy for nitrogen removal in recirculating aquaculture system. The average TAN and nitrate removal rates of 47.35±15.

Evidence for anaerobic ammonium oxidation process in freshwater sediments of aquaculture ponds.

The anaerobic ammonium oxidation (anammox) process, which can simultaneously remove ammonium and nitrite, both toxic to aquatic animals, can be very important to the aquaculture industry. Here, the presence and activity of anammox bacteria in the sediments of four different freshwater aquaculture ponds were investigated by using Illumina-based 16S rRNA gene sequencing, quantitative PCR assays and (15)N stable isotope measurements. Different genera of anammox bacteria were detected in the examined pond sediments, including Candidatus Brocadia, Candidatus Kuenenia and Candidatus Anammoxoglobus, with Candidatus Brocadia being the dominant anammox genus.

Biological denitrification using poly(butylene succinate) as carbon source and biofilm carrier for recirculating aquaculture system effluent treatment.

Nitrate removal is essential for the sustainable operation of recirculating aquaculture system (RAS). This study evaluated the heterotrophic denitrification using poly(butylene succinate) as carbon source and biofilm carrier for RAS wastewater treatment. The effect of varied operational conditions (influent type, salinity and nitrate loading) on reactor performance and microbial community was investigated.

Optimization of factors with C/N ratio and flocs biomass concentration in simulated aquaculture bio-flocs systems by response surface methodology.

The TAN (total ammonia nitrogen) removal efficiency was investigated in simulated aquaculture bio-flocs technology systems. The response surface methodology that was applied with a central composite rotational design and two key operational parameters, flocs biomass concentration and C/N ratio was varied in order to evaluate the system performance and achieve the optimal operational conditions in this study. A polynomial linear regression model was found to quantitatively describe the relationship between the two variables and response values with adequate fitness in the simulate aquaculture bio-flocs systems.

Study on the flocs poly-β-hydroxybutyrate production and process optimization in the bio-flocs technology system.

The bio-flocs technology (BFT) was applied in the sequencing batch reactor (SBR) to treat aquaculture wastewater for flocs poly-β-hydroxybutyrate (PHB) accumulation with alternant anaerobic and aerobic conditions. The statistical modeling approach was used to evaluate system performance and to optimize the flocs PHB yield at batch mode. The results show that all variables have significant impact on the response objective, as well as the interactions of the C/N ratio with the flocs biomass concentration (VSS) and anaerobic time, respectively.

[Denitrification and kinetic characteristics using biodegradable polymers as carbon source and biofilm carrier].

The PBS material that in the form of insoluble biodegradable polymers pellets was investigated as the solid carbon source and the biofilm carrier for nitrate removal from wastewater. The denitrification of nitrate removal and kinetic process were carried out in a packed-bed reactor in order to remove nitrate in recirculation aquaculture system. The experimental results indicated that the optimal influent loading rate was in the range of 0.