Tellurium/Bismuth Selenide van der Waals Heterojunction for Self-Driven, Broadband Photodetection and Polarization-Sensitive Application.

Broadband detection technology is crucial in the fields of astronomy and environmental surveying. Two dimensional (2D) materials have emerged as promising candidates for next-generation broadband photodetectors with the characteristics of high integration, multi-dimensional sensing, and low power consumption. Among these, 2D tellurium (Te) is particularly noteworthy due to its excellent mobility, tunable bandgap, and air stability.

Advances in Group-10 Transition Metal Dichalcogenide PdSe-Based Photodetectors: Outlook and Perspectives.

The recent advancements in low-dimensional material-based photodetectors have provided valuable insights into the fundamental properties of these materials, the design of their device architectures, and the strategic engineering approaches that have facilitated their remarkable progress. This review work consolidates and provides a comprehensive review of the recent progress in group-10 two-dimensional (2D) palladium diselenide (PdSe)-based photodetectors. This work first offers a general overview of the various types of PdSe photodetectors, including their operating mechanisms and key performance metrics.

Oxygen Vacancies Trigger Rapid Charge Transport Channels at the Engineered Interface of S-Scheme Heterojunction for Boosting Photocatalytic Performance.

Although oxygen vacancies (Ovs) have been intensively studied in single semiconductor photocatalysts, exploration of intrinsic mechanisms and in-depth understanding of Ovs in S-scheme heterojunction photocatalysts are still limited. Herein, a novel S-scheme photocatalyst made from WO-Ov/InS with Ovs at the heterointerface is rationally designed. The microscopic environment and local electronic structure of the S-scheme heterointerface are well optimized by Ovs.

Efficient Solar-Driven Interfacial Water Evaporator using Hydrogel Modified Carbon-Based Biomass with Abundant Microchannels.

The conventional sea water desalination technologies are not yet adopted worldwide, especially in the third world countries due to their high capital cost as well as large energy requirement. To solve this issue in a sustainable way an interfacial solar water evaporation device is designed and proposed in this article using the branches of Prunus serrulata (PB). The PB has abundant microchannels and shows excellent photothermal conversion capability after carbonization.

Uncooled Mid-Infrared Sensing Enabled by Chip-Integrated Low-Temperature-Grown 2D PdTe Dirac Semimetal.

Next-generation mid-infrared (MIR) imaging chips demand free-cooling capability and high-level integration. The rising two-dimensional (2D) semimetals with excellent infrared (IR) photoresponses are compliant with these requirements. However, challenges remain in scalable growth and substrate-dependence for on-chip integration.

2D Semi-Metallic Hafnium Ditelluride: A Novel Nonlinear Optical Material for Ultrafast and Ultranarrow Photonics Applications.

2D semi-metallic hafnium ditelluride material is used in several applications such as solar steam generation, gas sensing, and catalysis owing to its strong near-infrared absorbance, high sensitivity, and distinctive electronic structure. The zero-bandgap characteristics, along with the thermal and dynamic stability of 2D-HfTe make it a desirable choice for developing long-wavelength-range photonics devices. Herein, the HfTe -nanosheets are prepared using the liquid-phase exfoliation method, and their superior nonlinear optical properties are demonstrated by the obtained modulation depth of 11.

Bio-Derived Photothermal Materials and Evaporators for Sustainable Solar Energy-Driven Water Process.

Interfacial solar steam generation (ISSG) is considered as an excellent seawater desalination technology because of its electricity-independent nature, low cost, and portability. However, improving the water evaporation efficiency, simplifying the fabrication process, and reducing the overall cost of the evaporator are still challenging. Here, an efficient and sustainable solar water evaporator is fabricated with carbonized ginkgo biloba leaves as the structural basis of photothermal materials.

Multiwalled Carbon Nanotube-Based On-Body Patch Antenna for Detecting COVID-19-Affected Lungs.

A novel rectangular patch antenna based on multiwall carbon nanotubes has been designed and developed for assisting the initial detection of COVID-19-affected lungs. Due to their highly conductive nature, each nanotube echoes electromagnetic waves in a unique manner, influencing the increase in bandwidth. The proposed antenna operates at 6.

Nonlinear Optical Activities in Two-Dimensional Gallium Sulfide: A Comprehensive Study.

The nonlinear optical (NLO) properties of two-dimensional (2D) materials are fascinating for fundamental physics and optoelectronic device development. However, relatively few investigations have been conducted to establish the combined NLO activities of a 2D material. Herein, a study of numerous NLO properties of 2D gallium sulfide (GaS), including second-harmonic generation (SHG), two-photon excited fluorescence (TPEF), and NLO absorption are presented.

Beyond Tristimulus Color Vision with Perovskite-Based Multispectral Sensors.

In this study, optical multispectral sensors based on perovskite semiconductors have been proposed, simulated, and characterized. The perovskite material system combined with the 3D vertical integration of the sensor channels allow for realizing sensors with high sensitivities and a high spectral resolution. The sensors can be applied in several emerging areas, including biomedical imaging, surveillance, complex motion planning of autonomous robots or vehicles, artificial intelligence, and agricultural applications.

Waste Egg Tray and Toner-Derived Highly Efficient 3D Solar Evaporator for Freshwater Generation.

With the advancement of civilization, water purification, as well as management and disposal of ever-increasing municipal solid waste (MSW), and e-waste, have become global concerns. To address these issues in a sustainable way, a 3D solar evaporator has been proposed in this paper by repurposing recycled paper from MSW in the form of egg trays and waste dry toner (e-waste) using a facile fabrication method. The unique 3D porous structure, fibrous surface, superior water absorbing capability as well as low thermal conductivity of wastepaper-derived egg trays make them an excellent candidate for an efficient solar evaporator, while the waste toner powder coating significantly enhances the optical absorbance capacity.

Two-Dimensional Gallium Sulfide as a Novel Saturable Absorber for Broadband Ultrafast Photonics Applications.

Two-dimensional (2D) gallium sulfide (GaS) offers a plethora of exceptional electrical and optical properties, allowing it to be used in a wide range of applications, including photodetectors, hydrogen generation, and nonlinear optical devices. In this paper, ultrathin 2D GaS nanosheets are synthesized using the liquid-phase exfoliation method, and the structure, morphology, and chemical composition of the as-prepared nanosheets are extensively investigated. After depositing 2D GaS nanosheets on side polished fibers, successful saturable absorbers (SAs) are fabricated for the first time.

Spray Pyrolyzed TiO Embedded Multi-Layer Front Contact Design for High-Efficiency Perovskite Solar Cells.

The photovoltaic performance of perovskite solar cells (PSCs) can be improved by utilizing efficient front contact. However, it has always been a significant challenge for fabricating high-quality, scalable, controllable, and cost-effective front contact. This study proposes a realistic multi-layer front contact design to realize efficient single-junction PSCs and perovskite/perovskite tandem solar cells (TSCs).

Ultrafast Yb-Doped Fiber Laser Using Few Layers of PdS Saturable Absorber.

Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have exceptional optoelectronic and structural properties, which allow them to be utilized in several significant applications in energy, catalyst, and high-performance optoelectronic devices. Among other properties, the nonlinear optical properties are gaining much attention in the research field. In this work, a unique pentagonal TMD material, palladium disulfide (PdS), is employed as a saturable absorber (SA) in an ytterbium-doped fiber (YDF) laser cavity and mode-locked laser pulse is generated.

Van der Waals Epitaxial Growth of Mosaic-Like 2D Platinum Ditelluride Layers for Room-Temperature Mid-Infrared Photodetection up to 10.6 µm.

Mid-infrared (MIR) photodetection, covering diverse molecular vibrational regions and atmospheric transmission windows, is vital to civil and military purposes. Versatile use of MIR photodetectors is commonly dominated by HgCdTe alloys, InSb, and quantum superlattices, which are limited by strict operation demands, high-cost, and environmental toxicity. Despite the rapid advances of black phosphorus (BP)-based MIR photodetectors, these are subject to poor stability and large-area integration difficulty.

Utilization of group 10 2D TMDs-PdSe as a nonlinear optical material for obtaining switchable laser pulse generation modes.

In-plane anisotropic two-dimensional (2D) materials have gained considerable interest in the field of research, due to having the potential of being used in different device applications. Recently, among these 2D materials, group 10 transition metal dichalcogenides (TMDs) pentagonal Palladium diselenide (PdSe) is utilized in various sections of researches like nanoelectronics, thermoelectric, spintronics, optoelectronics, and ultrafast photonics, owing to its high air stability and broad absorption spectrum properties. In this paper, it is demonstrated that by utilizing this novel 2D layered PdSe material as a saturable absorber (SA) in an EDF laser system, it is possible to obtain switchable laser pulse generation modes.

Perovskite Color Detectors: Approaching the Efficiency Limit.

Color image sensing by a smartphone or digital camera employs sensor elements with an array of color filters for capturing basic blue, green, and red color information. However, the normalized optical efficiency of such color filter-based sensor elements is limited to only one-third. Optical detectors based on perovskites are described, which can overcome this limitation.

Atomic layer deposition of metal oxides for efficient perovskite single-junction and perovskite/silicon tandem solar cells.

Aluminum-doped and undoped zinc oxide films were investigated as potential front and rear contacts of perovskite single and perovskite/silicon tandem solar cells. The films were prepared by atomic layer deposition (ALD) at low (<200 °C) substrate temperatures. The deposited films were crystalline with a single-phase wurtzite structure and exhibit excellent uniformity and low surface roughness which was confirmed by XRD and SEM measurements.

Influence of Perovskite Interface Morphology on the Photon Management in Perovskite/Silicon Tandem Solar Cells.

Perovskite/silicon tandem solar cells are considered as one of the cost-effective solutions for determining high energy conversion efficiencies. Efficient photon management allows improving light incoupling in solar cells by reducing optical losses. The optics relies upon the interface morphology, and consequently, the growth mechanism of the top cell on the bottom cell is crucial for the implementation of efficient perovskite/silicon tandem solar cells.

Photoluminescence of PdS and PdSe quantum dots.

Group-10 transition metal dichalcogenide (TMD) materials have recently attracted considerable attention in optoelectronics applications. However, so far their quantum dot (QD) counterparts with photoluminescence (PL) nature still remain to be revealed. In this study, 2 typical types of group-10 TMD material (PdS and PdSe) QDs are fabricated liquid exfoliation using -methyl-2-pyrrolidone (NMP) solvent.

Multilayered PdSe/Perovskite Schottky Junction for Fast, Self-Powered, Polarization-Sensitive, Broadband Photodetectors, and Image Sensor Application.

Group-10 transition metal dichalcogenides (TMDs) with distinct optical and tunable electrical properties have exhibited great potential for various optoelectronic applications. Herein, a self-powered photodetector is developed with broadband response ranging from deep ultraviolet to near-infrared by combining FA Cs PbI perovskite with PdSe layer, a newly discovered TMDs material. Optoelectronic characterization reveals that the as-assembled PdSe/perovskite Schottky junction is sensitive to light illumination ranging from 200 to 1550 nm, with the highest sensitivity centered at ≈800 nm.

Valence Engineering Dual-Cation and Boron Doping in Pyrite Selenide for Highly Efficient Oxygen Evolution.

Valence engineering has been proved an effective approach to modify the electronic property of a catalyst and boost its oxygen evolution reaction (OER) activity, while the limited number of elements restricts the structural diversity and the active sites. Also, the catalyst performance and stability are greatly limited by cationic dissolution, ripening, or crystal migration in a catalytic system. Here we employed a widely used technique to fabricate heteroepitaxial pyrite selenide through dual-cation substitution and a boron dopant to achieve better activity and stability.

Phosphorus Incorporation into Co S Nanocages for Highly Efficient Oxygen Evolution Catalysis.

The improvement of activity of electrocatalysts lies in the increment of the density of active sites or the enhancement of intrinsic activity of each active site. A common strategy to realize dual active sites is the use of bimetal compound catalysts, where each metal atom contributes one active site. In this work, a new concept is presented to realize dual active sites with tunable electron densities in monometal compound catalysts.