On-Substrate Joule Effect Heating by Printed Micro-Heater for the Preparation of ZnO Semiconductor Thin Film.

Fabrication of printed electronic devices along with other parts such as supporting structures is a major problem in modern additive fabrication. Solution-based inkjet printing of metal oxide semiconductor usually requires a heat treatment step to facilitate the formation of target material. The employment of external furnace introduces additional complexity in the fabrication scheme, which is supposed to be simplified by the additive manufacturing process.

Robust Photodetectable Paper from Chemically Exfoliated MoS-MoO Multilayers.

Photodetectors, which are capable of detecting light with varied wavelength, have nowadays been widely applied onto emerging fields such as security, entertainment, healthcare, environment, and so on. As the one with a two-dimensional layered structure, molybdenum disulfide (MoS) possesses striking optical and electrical properties that can be used in photodetecting, yet the challenges remain in terms of material processing, device fabrication simplicity, and enhancement of overall photodetection performance. In this work, a photodetectable paper based on a mixture of double-phased MoS (1T and 2H) and MoO was successfully fabricated through a straightforward route, that is, chemical exfoliation and deposition of MoS powder on a flexible cellulose ester membrane, followed by inkjet-printed PEDOT:PSS as electrodes.

Paper/Carbon Nanotube-Based Wearable Pressure Sensor for Physiological Signal Acquisition and Soft Robotic Skin.

A wearable and flexible pressure sensor is essential to the realization of personalized medicine through continuously monitoring an individual's state of health and also the development of a highly intelligent robot. A flexible, wearable pressure sensor is fabricated based on novel single-wall carbon nanotube /tissue paper through a low-cost and scalable approach. The flexible, wearable sensor showed superior performance with concurrence of several merits, including high sensitivity for a broad pressure range and an ultralow energy consumption level of 10 W.

Fast light-induced reversible wettability of a zinc oxide nanorod array coated with a thin gold layer.

Zinc oxide (ZnO) has gained much attention recently due to its excellent physical and chemical properties, and has been extensively studied in energy harvesting applications such as photovoltaic and piezoelectric devices. In recent years, its reversible wettability has also attracted increasing interest. The wettability of ZnO nanostructures with various morphologies has been studied.

All-inkjet-printed flexible ZnO micro photodetector for a wearable UV monitoring device.

Fabrication of small-sized patterns of inorganic semiconductor onto flexible substrates is a major concern when manufacturing wearable devices for measuring either biometric or environmental parameters. In this study, micro-sized flexible ZnO UV photodetectors have been thoroughly prepared by a facile inkjet printing technology and followed with heat treatments. A simple ink recipe of zinc acetate precursor solution was investigated.

Inkjet-printed optoelectronics.

Inkjet printing is a powerful and cost-effective technique for deposition of liquid inks with high accuracy, which is not only of great significance for graphic applications but also has enormous potential for the direct printing of optoelectronic devices. This review highlights a comprehensive overview of the progress that has been made in optoelectronics fabrication by the inkjet printing technique. The first part briefly covers the droplet-generation process in the nozzles of printheads and the physical properties affecting droplet formation and the profiles of the printed patterns.

MoS2 Nanosheets Hosted in Polydopamine-Derived Mesoporous Carbon Nanofibers as Lithium-Ion Battery Anodes: Enhanced MoS2 Capacity Utilization and Underlying Mechanism.

In this work, solid, hollow, and porous carbon nanofibers (SNFs, HNFs, and PNFs) were used as hosts to grow MoS2 nanosheets hydrothermally. The results show that the nanosheets on the surface of SNFs and HNFs are comprised of a few grains stacked together, giving direct carbon-MoS2 contact for the first grain and indirect contact for the rest. In contrast, the nanosheets inside of PNFs are of single-grain size and are distributed evenly in the mesopores of PNFs, providing efficient MoS2-carbon contact.

Growth of rutile TiO₂ on the convex surface of nanocylinders: from nanoneedles to nanorods and their electrochemical properties.

In this work, bundles of rutile TiO₂ nanoneedles/nanorods are hydrothermally grown on carbon nanofibers (CNFs), forming free-standing mats consisting of three dimensional hierarchical nanostructures (TiO₂-on-CNFs). Morphologies and structures of the TiO₂-on-CNFs are studied using a field-emission scanning electron microscope (FESEM), transmission electron microscope (TEM), X-ray diffractometer (XRD) and thermogravimetric analyzer (TGA). Their electrochemical properties as electrodes in lithium ion batteries (LIBs) are investigated and correlated with the morphologies and structures.

Towards perfectly ordered novel ZnO/Si nano-heterojunction arrays.

The fabrication of a highly ordered novel ZnO/Si nano-heterojuntion array is introduced. ZnO seed layer is first deposited on the Si (P<111>) surface. The nucleation sites are then defined by patterning the surface through focused ion beam (FIB) system.

Silicon nanoparticles encapsulated in hollow graphitized carbon nanofibers for lithium ion battery anodes.

Silicon (Si) is a promising material for lithium ion battery (LIB) anodes due to its high specific capacity. To overcome its shortcomings such as insulation property and large volume change during the charge-discharge process, a novel hybrid system, Si nanoparticles encapsulated in hollow graphitized carbon nanofibers, is studied. First, electrospun polyacrylonitrile (PAN)-Si hybrid nanofibers were obtained using water as the collector.

Highly electrically conductive layered carbon derived from polydopamine and its functions in SnO2-based lithium ion battery anodes.

Thin carbonized polydopamine (C-PDA) coatings are found to have similar structures and electrical conductivities to those of multilayered graphene doped with heteroatoms. Greatly enhanced electrochemical properties are achieved with C-PDA-coated SnO(2) nanoparticles where the coating functions as a mechanical buffer layer and conducting bridge.

Enhanced photoelectrochemical performance of bridged ZnO nanorod arrays grown on V-grooved structure.

Bridged ZnO nanorod arrays on a V-grooved Si(100) substrate were used as the photoanode of a photoelectrochemical (PEC) cell for water splitting. Photolithography followed by reactive ion etching was employed to create a V-grooved structure on a Si substrate. ZnO nanorod arrays were grown via a hydrothermal method.

Enhanced photoelectrochemical water-splitting effect with a bent ZnO nanorod photo anode decorated with Ag nanoparticles.

Zinc oxide (ZnO) nanorods coated with silver (Ag) film on a polyethylene terephthalate (PET)flexible substrate were used as the photo anode for water splitting. The hybrid nanostructures were prepared via low-temperature hydrothermal growth and electron beam evaporation. The effects of plasmonic enhanced absorption, surface recombination inhibition and improved charge transport are investigated by varying the Ag thickness.