Developing high-performance and sustainable polylactic acid/recycled polyolefin blends: Tuning the degree of functional group reaction and performance optimization.

In the current development of the plastics industry, the use of biodegradable and recycled plastics not only effectively reduces the volume of landfills and incineration but also significantly decreases environmental damage. However, the extensive application of biodegradable polylactic acid (PLA) is limited by its poor toughness and thermal properties. The study introduced recycled linear low-density polyethylene (R-LLDPE) and ethylene-octene copolymer (POE) to modify PLA, primarily based on their excellent toughness and thermal resistance.

Analysis of the status and influencing factors of dignity impairment symptoms in critically ill patients after ICU treatment.

To investigate the status of dignity impairment symptoms in critically ill patients after ICU treatment and conduct a systematic analysis of its influencing factors, aiming to provide reference for clinical medical decision-making by healthcare professionals. A cross-sectional survey study. From April 15th to 21st, 2024, a cross-sectional survey was conducted in 40 tertiary Grade A comprehensive hospitals in 9 provinces, municipalities, and autonomous regions including Sichuan Province, Zhejiang Province, and Chongqing Municipality.

Synergistic effects of dual reactive compatibilizers for high-performance fully biodegradable polylactic acid/poly (butyleneadipate-co-terephthalate) composites.

The PLA-g-(GMA-co-St) graft copolymer (PGS) was prepared using melt-free radical grafting technology, PGS and ESO were simultaneously employed as compatibilizers for the poly (lactic acid)/poly (butylene adipate-co-terephthalate) (PLA/PBAT) blends. The effects of the type and amount of compatibilizers on the properties of the blends were studied. The results reveal that the epoxy groups in PGS and ESO can interact with the terminal groups of PLA and PBAT.

In Situ Study and Improvement of the Temperature Increase and Isothermal Retention Stages in the Polyacrylonitrile (PAN) Fiber Pre-Oxidation Process.

The pre-oxidation process of Polyacrylonitrile (PAN) fibers is a complex procedure involving multiple stages of temperature increase and isothermal temperature retention. However, the impact of the temperature increase stage on PAN fiber has often been overlooked. To address this, samples were collected before and after the temperature increase and isothermal retention stages, treating them as separate influencing factors.

Improving the properties of polylactic acid/polypropylene carbonate blends through cardanol-induced compatibility enhancement.

Cardanol (CD) is used as a reactive compatibilizer, and blended with polylactic acid (PLA) and polypropylene carbonate (PPC) resin (70/30(w/w)) to obtain a series of PLA/PPC/CD blends. The systematic study was conducted on the thermal properties, optical properties, rheological properties, mechanical properties, and microscopic morphology of the blend, by varying amounts of CD added to the blends. A detailed explanation and comprehensive analysis of the reaction mechanism between CD and PLA/PPC have been made.

High-performance and functional fully bio-based polylactic acid/polypropylene carbonate blends by in situ multistep reaction-induced interfacial control.

Using a solvent-free radical grafting technique, glycidyl methacrylate (GMA) and maleic anhydride (MAH) were used as functionalized graft monomers, styrene (St) as a copolymer monomer, and grafted onto polylactic acid (PLA). A series of PLA-g-(GMA/MAH-co-St) graft copolymers were prepared by adjusting the GMA/MAH ratio. Subsequently, the prepared graft copolymers were used as a compatibilizer with PLA and polypropylene carbonate (PPC) for melt blending to prepare PLA/PPC/PLA-g-(GMA/MAH-co-St) blends.

A critical role of outer membrane vesicles in antibiotic resistance in carbapenem-resistant Klebsiella pneumoniae.

Background: This study aimed to illustrate the status of carbapenem-resistant Enterobacterales (CRE) infections in a Chinese tertiary hospital and to investigate the role of outer membrane vesicles (OMVs) in antibiotic resistance in carbapenem-resistant Klebsiella pneumoniae (CRKP).

Methods: The data of CRE infections was collected from laboratory records, and the CRE isolates from two distinct periods (2015/07 to 2017/07 and 2020/04 to 2021/04) were enrolled to detect the carbapenemase genes by polymerase chain reaction (PCR). Multilocus sequence typing (MLST) was used to analyze the molecular characterization of CRKP.

Improvement of properties of polylactic acid/polypropylene carbonate blends using epoxy soybean oil as an efficient compatibilizer.

Epoxidized soybean oil (ESO) was used as a compatibilizer and blended with polylactic acid (PLA) and polypropylene carbonate (PPC) resin to prepare a series of PLA/PPC/ESO blends with varying compositions. The influence of the variation in the amount of ESO added to the blend system on the thermal properties, optical properties, rheological properties, mechanical properties, and microscopic morphology of the blends was studied. The research indicates that ESO can react with PLA and PPC to form a chemical bond interface, which improves the compatibility of PLA and PPC to a certain extent.

The Effect of Functionalized SEBS on the Properties of PP/SEBS Blends.

Styrene (St) was used as comonomer and glycidyl methacrylate (GMA) as grafting monomer to prepare SEBS-g-(GMA-co-St) graft copolymers via melt grafting. Then, the graft copolymers were employed as a compatibilizer for melt blending polypropylene (PP) and hydrogenated styrene-butadiene-styrene (SEBS) triblock copolymers. The effects of the amount of GMA in the graft copolymers on thermal properties, rheology, crystallization, optical and mechanical properties, and microstructure of the blends were investigated.

Effect of Octene Block Copolymer (OBC) and High-Density Polyethylene (HDPE) on Crystalline Morphology, Structure and Mechanical Properties of Octene Random Copolymer.

Blending octene random copolymer (ORC) with other polymers is a promising approach to improving ORC mechanical properties, such as tensile strength and elongation. In this study, octene block copolymer (OBC) with lower density than ORC and high-density polyethylene (HDPE) were used to blend with ORC. The effect of both OBC and HDPE on ORC was analyzed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and small-angle X-ray scattering (SAXS).

Structural insights into neurokinin 3 receptor activation by endogenous and analogue peptide agonists.

Neurokinin 3 receptor (NK3R) is a tachykinin receptor essential for the hypothalamic-pituitary-gonadal axis. The endogenous peptide agonist neurokinin B (NKB) preferentially activates NK3R, while substance P (SP) binds preferentially to NK1R. In addition, the SP analogue senktide more potently activates NK3R than NKB and SP.

Effects of Ethylene-Propylene-Diene Monomers (EPDMs) with Different Moony Viscosity on Crystallization Behavior, Structure, and Mechanical Properties of Thermoplastic Vulcanizates (TPVs).

Moony viscosity of ethylene-propylene-diene monomers (EPDMs) can have effect on the crystallization dynamics, structure, and properties of EPDM/polypropylene (PP)-based thermoplastic vulcanizates (TPVs). TPVs with two different Moony viscosities are prepared via a twin-screw extruder, respectively. Crosslinked EPDM with lower Moony viscosity has a higher crosslinking density and the nucleation effect of its crosslink point improves the crystallization ability of PP in TPV, leading to PP phase crystallization at higher temperatures.

The Relationship between Microstructure and Mechanical Properties of PBST Two-Component Crystalline Random Copolymers with Different BT Contents.

The mechanical properties of two-component crystalline random copolymers are primarily based on their microstructure. At the same time, the influence of the composition on the crystallization behavior and crystal structure of these materials is also well known. Thus, in this study, a poly (butylene succinate-co-butylene terephthalate) random copolymer (PBST) with different molar ratios of butylene terephthalate (BT) was prepared.

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends.

The dynamic crosslinking method has been widely used to prepare rubber/plastic blends with thermoplastic properties, and the rubber phase is crosslinked in these blends. Both polyolefin elastomer (POE) and ethylene-propylene-diene monomer rubber (EPDM) can be crosslinked, which is different from usual dynamic crosslinking components. In this paper, dynamic crosslinked POE/EPDM blends were prepared.

The Crystallisation, Microphase Separation and Mechanical Properties of the Mixture of Ether-Based TPU with Different Ester-Based TPUs.

The difference in compatibility at the molecular level can lead to a change of microphase separation structure of thermoplastic polyurethanes blend systems, which will improve their thermal and mechanical properties. In this study, TDI-polyester based TPU was blended with MDI-polyether-based TPU and MDI-polyester based TPU, with different ratios. In the blend system, the obvious reduction of the melting temperature of the high-temperature TDI-polyester based TPU component indicates its hard segments can be mutually integrated with the other component.

Crystallization, Structure and Significantly Improved Mechanical Properties of PLA/PPC Blends Compatibilized with PLA-PPC Copolymers Produced by Reactions Initiated with TBT or TDI.

Poly (lactic acid) (PLA)-Poly (propylene carbonate) (PPC) block copolymer compatibilizers are produced in incompatible 70wt%PLA/PPC blend by initiating transesterification with addition of 1% of tetra butyl titanate (TBT) or by chain extension with addition of 2% of 2,4-toluene diisocyanate (TDI). The above blends can have much better mechanical properties than the blend without TBT and TDI. The elongation at break is dramatically larger (114% with 2% of TDI and 60% with 1% of TBT) than the blend without TDI and TBT, with a slightly lower mechanical strength.

Comparison of Digestive Enzyme Activities and Expression of Small Intestinal Transporter Genes in Jinhua and Landrace Pigs.

Digestive enzyme activity is involved in the regulation of growth performance because digestive enzymes function to improve the feed efficiency by digestion and in turn to modulate the process of nutrient metabolism. The objective of this study was to investigate the differences of the digestive enzyme activities and expression of nutrient transporters in the intestinal tract between Jinhua and Landrace pigs and to explore the potential breed-specificity in digestion and absorption. The pancreas segments and the digesta and mucosa of the duodenum, jejunum, and ileum were collected from 10 Jinhua pigs and Landrace pigs, respectively.

Identification of Enterotype and Its Effects on Intestinal Butyrate Production in Pigs.

Gut microbiota is thought to play a crucial role in nutrient digestion for pigs, especially in processing indigestible polysaccharides in the diets to produce short-chain fatty acids (SCFAs). However, the link between microbiota community structure and phenotypic performances are poorly understood. In the present study, the fecal samples of 105 Jinhua pigs at 105 days of age were clustered into three enterotypes (ETs, ET1, ET2, and ET3) that are subpopulations of distinct bacterial community composition by using 16S rRNA high throughput sequencing.

A Real-Time Smooth Weighted Data Fusion Algorithm for Greenhouse Sensing Based on Wireless Sensor Networks.

Wireless sensor networks are widely used to acquire environmental parameters to support agricultural production. However, data variation and noise caused by actuators often produce complex measurement conditions. These factors can lead to nonconformity in reporting samples from different nodes and cause errors when making a final decision.

Full screening and accurate subtyping of HLA-A*02 alleles through group-specific amplification and mono-allelic sequencing.

HLA-A*02 is the most prevalent and polymorphic major histocompatibility complex (MHC) allele family in humans. Functional differences have been revealed among subtypes, demanding further subtyping of HLA-A*02 in basic and clinical settings. However, the fast growing polymorphisms render traditional primer- or probe-based typing methods impractical and result in increasing ambiguities in direct sequence-based typing.

Novel immunoregulatory properties of EGCG on reducing inflammation in EAE.

EGCG is one of the major catechins in green tea. In this study, we investigated the novel regulatory mechanism of EGCG on amelioration of experimental autoimmune encephalomyelitis (EAE). The data showed that EGCG reduced disease severity in EAE by decreasing brain inflammation and demyelination damage, accompanied by decreased encephalitogenic T cell responses and reduced expression of inflammatory cytokines and chemokines.