Robust and efficient separation of white blood cells from blood using a microfluidic chip with a pair of linearly tapered crossflow filter arrays.

Clinical and immunological assays of white blood cells (WBCs) in human peripheral blood are of significance for disease diagnosis and immunological studies. However, separating WBCs from blood with high recovery and high purity remains challenging. In this study, by incorporating a pair of linearly tapered filter arrays, a crossflow filtration-based microfluidic chip was designed and fabricated for separation of WBCs from blood.

Development of an Interprofessional Education Project in Dentistry Based on the Positive Behavior Support Theory: Pilot Curriculum Development and Validation Study.

Background: Effective interprofessional education (IPE) can facilitate teamwork between dentists and dental technicians, thereby enabling the efficient provision of high-quality dental care.

Objective: This study aimed to design and assess an IPE module named Project 35, which was offered to dental and dental technology students early in their undergraduate training as a precursor to a more comprehensive IPE curriculum in dentistry and dental technology.

Methods: Leveraging positive behavior support (PBS) theory, Project 35 was devised as an innovation and entrepreneurship educational training framework.

Nutritional load in post-prandial oxidative stress and the pathogeneses of diabetes mellitus.

Diabetes mellitus affected more than 500 million of people globally, with an annual mortality of 1.5 million directly attributable to diabetic complications. Oxidative stress, in particularly in post-prandial state, plays a vital role in the pathogenesis of the diabetic complications.

Virtual sketching-based dental anatomy module improves learners' abilities to use computer-aided design to create dental restorations and prostheses.

Dental anatomy education for dental technology students should be developed in alignment with digital dental laboratory practices. We hypothesized that a virtually assisted sketching-based dental anatomy teaching module could improve students' acquisition of skills essential for digital restoration design. The second-year dental technology curriculum included a novel virtual technology-assisted sketching-based module for dental anatomy education.

3D-printed customised titanium mesh and bone ring technique for bone augmentation of combined bone defects in the aesthetic zone.

Purpose: Complex bone defects with a horizontal and vertical combined deficiency pose a clinical challenge in implant dentistry. This study reports the case of a young female patient who presented with a perforating bone defect in the aesthetic zone.

Materials And Methods: Based on prosthetically guided bone regeneration, virtual 3D bone augmentation was planned.

Machine learning-enabled high-throughput industry screening of edible oils.

Long-term consumption of mixed fraudulent edible oils increases the risk of developing of chronic diseases which has been a threat to the public health globally. The complicated global supply-chain is making the industry malpractices had often gone undetected. In order to restore the confidence of consumers, traceability (and accountability) of every level in the supply chain is vital.

Facile and Programmable Capillary-Induced Assembly of Prototissues via Hanging Drop Arrays.

An important goal for bottom-up synthetic biology is to construct tissue-like structures from artificial cells. The key is the ability to control the assembly of the individual artificial cells. Unlike most methods resorting to external fields or sophisticated devices, inspired by the hanging drop method used for culturing spheroids of biological cells, we employ a capillary-driven approach to assemble giant unilamellar vesicles (GUVs)-based protocells into colonized prototissue arrays by means of a coverslip with patterned wettability.

Portable Handheld "SkinPen" Loaded with Biomaterial Ink for In Situ Wound Healing.

In situ bioprinting has emerged as an attractive tool for directly depositing therapy ink at the defective area to adapt to the irregular wound shape. However, traditional bioprinting exhibits an obvious limitation in terms of an unsatisfactory bioadhesive effect. Here, a portable handheld bioprinter loaded with biomaterial ink is designed and named "SkinPen".

A Brief Review on Medicinal Plants-At-Arms against COVID-19.

COVID-19 pandemic caused by the novel SARS-CoV-2 has impacted human livelihood globally. Strenuous efforts have been employed for its control and prevention; however, with recent reports on mutated strains with much higher infectivity, transmissibility, and ability to evade immunity developed from previous SARS-CoV-2 infections, prevention alternatives must be prepared beforehand in case. We have perused over 128 recent works (found on Google Scholar, PubMed, and ScienceDirect as of February 2023) on medicinal plants and their compounds for anti-SARS-CoV-2 activity and eventually reviewed 102 of them.

Evaluation of surgical placement accuracy of customized CAD/CAM titanium mesh using screws-position-guided template: A retrospective comparative study.

Background: Customized computer-aided-design/computer-aided-manufacturing (CAD/CAM) titanium meshes have been adopted for alveolar bone augmentation. But the inaccuracies between planned and created bone volume/contour are quite common, and the surgical placement of the customized mesh was considered as the first critical factor. However, the evaluation of surgical placement accuracy of customized mesh is currently lacking.

Application of three-dimensional printing individualized titanium mesh in alveolar bone defects with different Terheyden classifications: A retrospective case series study.

Objective: To present the results of guided bone regeneration (GBR) with three-dimensional printing individualized titanium mesh (3D-PITM) applied to alveolar bone defects with different Terheyden classifications and the factors affecting the osteogenic outcome.

Materials And Methods: Fifty-nine patients, presenting with 61 defect sites, were enrolled between 2018 and 2021. GBR+3D-PITM was obtained with simultaneous or second stage implant placement.

The effect of bone defect size on the 3D accuracy of alveolar bone augmentation performed with additively manufactured patient-specific titanium mesh.

Objective: Additively manufactured (3D-printed) titanium meshes have been adopted in the dental field as non-resorbable membranes for guided bone regeneration (GBR) surgery. However, according to previous studies, inaccuracies between planned and created bone volume and contour are common, and many reasons have been speculated to affect its accuracy. The size of the alveolar bone defect can significantly increase patient-specific titanium mesh design and surgical difficulty.

Predicting the risk of dental implant loss using deep learning.

Aim: To investigate the feasibility of predicting dental implant loss risk with deep learning (DL) based on preoperative cone-beam computed tomography.

Materials And Methods: Six hundred and three patients who underwent implant surgery (279 high-risk patients who did and 324 low-risk patients who did not experience implant loss within 5 years) between January 2012 and January 2020 were enrolled. Three models, a logistic regression clinical model (CM) based on clinical features, a DL model based on radiography features, and an integrated model (IM) developed by combining CM with DL, were developed to predict the 5-year implant loss risk.

Assessment of Customized Alveolar Bone Augmentation Using Titanium Scaffolds vs Polyetheretherketone (PEEK) Scaffolds: A Comparative Study Based on 3D Printing Technology.

Customized alveolar bone augmentation provides sufficient and precisely regenerated bone tissue for subsequent dental implant placement. Although some clinical cases have confirmed the successful use of the patient-specific polyetheretherketone (PEEK) scaffolds, the biomechanical property and osteogenic performance of the patient-specific PEEK scaffolds remain unclear. The objectives of this study were (1) to evaluate the space maintenance capacity and osteogenic performance of the patient-specific PEEK scaffolds for customized alveolar bone augmentation and (2) to compare the biomechanical properties of three-dimensionally printed titanium scaffolds and PEEK scaffolds.

Development of a rat model for type 2 diabetes mellitus peri-implantitis: A preliminary study.

Objective: To develop an in vivo model to simulate the complex internal environment of diabetic peri-implantitis (T2DM-PI) model for a better understanding of peri-implantitis in type 2 diabetic patients.

Materials And Methods: Maxillary first molars were extracted in Sprague-Dawley (SD) rats, and customized cone-shaped titanium implants were installed in the extraction sites. Thereafter, implants were uncovered and customized abutments were screwed into implants.

Effect of Porous Microstructures on the Biomechanical Characteristics of a Root Analogue Implant: An Animal Study and a Finite Element Analysis.

Background: Full ceramic or metal custom-made root analogue implants (RAIs) are made by replicating the natural tooth geometry. However, it may lead to the stress shielding of the surrounding bone, and an RAI is unable to easily achieve primary stability. Therefore, to improve primary stability and reduce stress shielding, RAI porous structures are proposed.

Research on the dimensional accuracy of customized bone augmentation combined with 3D-printing individualized titanium mesh: A retrospective case series study.

Background: Few studies have focused on the dimensional accuracy of customized bone grafting by means of guided bone regeneration (GBR) with 3D-Printed Individual Titanium Mesh (3D-PITM).

Purpose: Digital technologies were applied to evaluate the dimensional accuracy of customized bone augmentation with 3D-PITM with a two-stage technique.

Materials And Methods: Sixteen patients were included in this study.

Effects of injectable platelet rich fibrin on bone remodeling in combination with DBBM in maxillary sinus elevation: a randomized preclinical study.

Objectives: This study aims to assess the angiogenic and osteogenic capacity in rabbit sinus model grafted with Deproteinized bovine bone mineral (DBBM) particles soaked in injectable Platelet rich fibrin (iPRF), both of which interacted to form an integrated block.

Materials And Methods: Among sixteen rabbits, bilateral maxillary sinuses were randomly grafted with either DBBM containing iPRF (iPRF+DBBM group), or DBBM alone (DBBM group). After a 4 and 8-week healing period, animals were sacrificed for micro-CT, histological and immunofluorescence analyses, respectively.

Influence of the amount of intermetallics on the degradation of Mg-Nd alloys under physiological conditions.

The influence of amount of intermetallics on the degradation of as-extruded Mg-Nd alloys with different contents of Nd was investigated via immersion testing in DMEM+10% FBS under cell culture conditions and subsequent microstructural characterizations. It is found that the presence of intermetallic particles MgNd affects the corrosion of Mg-Nd alloys in two conflicting ways. One is their negative role that their existence enhances the micro-galvanic corrosion.

Impact of diabetes mellitus simulations on bone cell behavior through in vitro models.

Diabetes mellitus (DM) is related to impaired bone healing and an increased risk of bone fractures. While it is recognized that osteogenic differentiation and the function of osteoblasts are suppressed in DM, the influence of DM on osteoclasts is still unclear. Hyperglycemia and inflammatory environment are the hallmark of DM that causes dysregulation of various pro-inflammatory cytokines and alternated gene expression in periodontal ligament cells, osteoblasts, osteocytes, osteoclasts, and osteoclast precursors.

Radiographic Evaluation of the Alveolar Ridge Splitting Technique Combined with Guided Bone Regeneration vs Guided Bone Regeneration Alone in the Anterior Maxilla: A Retrospective Controlled Study.

This study aimed to estimate the radiographic outcomes of the alveolar ridge splitting (ARS) technique combined with guided bone regeneration (GBR) and compare its efficacy with GBR alone in maxillary anterior narrow ridges. Forty patients with 51 implants in the ARS group and 40 patients with 49 implants in the GBR group were included. The buccal bone thickness (BBT) at 0 to 4 mm from the implant shoulder immediately and 6 months postoperative were analyzed using cone beam computed tomography.

Comparison of in-situ bone ring technique and tent-pole technique for horizontally deficient alveolar ridge in the anterior maxilla.

Background: Limited studies focused on the bone profile maintenance at the alveolar ridge crest applying horizontal bone augmentation.

Purpose: A novel approach named as "in-situ bone ring technique" was introduced to be compared with tent-pole technique to evaluate their horizontal bone gain, resorption, and postoperative perception.

Materials And Methods: A total of 30 patients were included in this retrospective cohort study.

Gelatin Nanoparticle-Injectable Platelet-Rich Fibrin Double Network Hydrogels with Local Adaptability and Bioactivity for Enhanced Osteogenesis.

Bone healing is a dynamic process regulated by biochemical signals such as chemokines and growth factors, and biophysical signals such as topographical and mechanical features of extracellular matrix or mechanical stimuli. Hereby, a mechanically tough and bioactive hydrogel based on autologous injectable platelet-rich fibrin (iPRF) modified with gelatin nanoparticles (GNPs) is developed. This composite hydrogel demonstrates a double network (DN) mechanism, wherein covalent network of fibrin serves to maintain material integrity, and self-assembled colloidal network of GNPs dissipates force upon loading.

Effects of immediately static loading on osteointegration and osteogenesis around 3D-printed porous implant: A histological and biomechanical study.

The 3D-printed porous implant is capable of achieving favorable osteointegration and osteogenesis in the absence of mechanical stimulation during the early healing period. The purpose of this study is to evaluate the impact of immediately static loading on bone osteointegration and osteogenesis around the 3D-printed porous implant. Thirty porous implants with optimal configuration were installed bilaterally into femurs of 15 rabbits.