Adriamycin induces cardiac fibrosis in mice via PRMT5-mediated cardiac fibroblast activation.

Long-term treatment with adriamycin (ADR) is associated with higher incidences of cumulative cardiotoxicity manifest as heart failure. ADR-induced cardiomyopathy is characterized by extensive fibrosis that is caused by cardiac fibroblast activation. To date, however, no specific treatment is available to alleviate ADR-induced cardiotoxicity.

Anti-neuroinflammatory sesquiterpenoids from .

Hupelactones A () and B (), two new eudesmanolide-type enantiomers of the corresponding compounds, along with four mono- (-) and nine dimeric- (-) known sesquiterpenoids were isolated from the whole plant of var. . The new structures including the absolute configurations were determined by comparison with previously reported enantiomers, extensive spectroscopic methods in combination with electronic circular dichroism (ECD) calculations.

Further terpenoids from the Chloranthaceae plant Chloranthus multistachys and their anti-neuroinflammatory activities.

Three labdane-type [multisins A-C (1-3)], two guaiane-type [multisins D (4) and E (5)], and one eudesmane-type [multisin F (6)] previously undescribed terpenoids, together with 14 mono- (7-20) and seven dimeric- (21-27) known terpenoids, were isolated from the 90% MeOH extract of the whole plant of Chloranthus multistachys. Their structures and absolute configurations were determined by extensive spectroscopic methods and electronic circular dichroism (ECD) calculations. Compounds 4 and 5 are rare trinor-sesquiterpenes with a de-isopropyl guaiane skeleton, whereas compound 6 is a rearranged dinor-eudesmene featuring an uncommon octahydro-1H-indene ring system.

Extraction Behavior of Acidic Phosphorus-Containing Compounds to Some Metal Ions: A Combination Research of Experimental and Theoretical Investigations.

To provide feasible methods for the extraction of valuable metals from spent batteries or low-grade primary ores, the extraction behavior of some representative acidic phosphorus-containing compounds (APCCs) as extractants is evaluated from the perspective of experimental and theoretical investigations in this work. Aqueous solutions containing five metal ions, Ca(II), Co(II), Mg(II), Mn(II), and Ni(II), were made to simulate leaching liquids, and the extraction of these metals was investigated. A simplified calculated model was used to evaluate the interaction between each extractant and metal ions.

Lysergic acid diethylamide causes photoreceptor cell damage through inducing inflammatory response and oxidative stress.

Lysergic acid diethylamide (LSD), a classical hallucinogen, was used as a popular and notorious substance of abuse in various parts of the world. Its abuse could result in long-lasting abnormalities in retina and little is known about the exact mechanism. This study was to investigate the effect of LSD on macrophage activation state at non-toxic concentration and its resultant toxicity to photoreceptor cells.

Influence of the CYP4F2 polymorphism on the risk of hemorrhagic complications in coumarin-treated patients.

Objectives: To evaluate the impact of the CYP4F2 polymorphism on bleeding complications and over-anticoagulation due to coumarin.

Methods: A comprehensive literature search was performed to look for eligible studies published prior to February 2015 in EMBASE and PubMed. References were strictly identified by inclusion and exclusion criteria, and authors of primary studies were consulted for additional information and data.

A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics.

Human biomechanical energy is characterized by fluctuating amplitudes and variable low frequency, and an effective utilization of such energy cannot be achieved by classical energy-harvesting technologies. Here we report a high-efficient self-charging power system for sustainable operation of mobile electronics exploiting exclusively human biomechanical energy, which consists of a high-output triboelectric nanogenerator, a power management circuit to convert the random a.c.

Theoretical study of piezo-phototronic nano-LEDs.

Two-dimensional finite-element simulation of the piezo-phototronic effect in p-n-junction-based devices is carried out for the first time. A charge channel can be induced at the p-n junction interface when strain is applied, given the n-side is a piezoelectric semiconductor and the p-type side is non-piezoelectric semiconductor. This provides the first simulated evidence supporting the previously suggested mechanism responsible for the experimentally observed gigantic change of light-emission efficiency in piezo-phototronic light-emitting devices.

Maximum surface charge density for triboelectric nanogenerators achieved by ionized-air injection: methodology and theoretical understanding.

For the maximization of the surface charge density in triboelectric nanogenerators, a new method of injecting single-polarity ions onto surfaces is introduced for the generation of surface charges. The triboelectric nanogenerator's output power gets greatly enhanced and its maximum surface charge density is systematically studied, which shows a huge room for the improvement of the output of triboelectric nanogenerators by surface modification.

Self-powered, ultrasensitive, flexible tactile sensors based on contact electrification.

Tactile/touch sensing is essential in developing human-machine interfacing and electronic skins for areas such as automation, security, and medical care. Here, we report a self-powered triboelectric sensor based on flexible thin-film materials. It relies on contact electrification to generate a voltage signal in response to a physical contact without using an external power supply.

A shape-adaptive thin-film-based approach for 50% high-efficiency energy generation through micro-grating sliding electrification.

Effectively harvesting ambient mechanical energy is the key for realizing self-powered and autonomous electronics, which addresses limitations of batteries and thus has tremendous applications in sensor networks, wireless devices, and wearable/implantable electronics, etc. Here, a thin-film-based micro-grating triboelectric nanogenerator (MG-TENG) is developed for high-efficiency power generation through conversion of mechanical energy. The shape-adaptive MG-TENG relies on sliding electrification between complementary micro-sized arrays of linear grating, which offers a unique and straightforward solution in harnessing energy from relative sliding motion between surfaces.

Manipulating nanoscale contact electrification by an applied electric field.

Contact electrification is about the charge transfer between the surfaces of two materials in a contact-separation process. This effect has been widely utilized in particle separation and energy harvesting, where the charge transfer is preferred to be maximized. However, this effect is always undesirable in some areas such as electronic circuit systems due to the damage from the accumulated electrostatic charges.

Nanometer resolution self-powered static and dynamic motion sensor based on micro-grated triboelectrification.

A one-dimensional displacement and speed sensing technology that consists of a pair of micro-grating structures and utilizes the coupling between the triboelectric effect and electrostatic induction is demonstrated. Its distinct advantages, including being self-powered, high resolution, large dynamic range, and long detecting distance, show extensive potential applications in automation, manufacturing, process control, and portable devices.

A single-electrode based triboelectric nanogenerator as self-powered tracking system.

A newly designed triboelectric nanogenerator (TENG) is demonstrated based on a contact-separation process between an Al foil and a finite size polyamide (PA) film. The working mechanism is based on charge transfer between the Al foil and ground. A 4×4 matrix of TENG array can be used for tracking motion by recording the output voltages signals in real-time to form a pressure map.

Theory of sliding-mode triboelectric nanogenerators.

The triboelectric nanogenerator (TENG) is a powerful approach toward new energy technology, especially for portable electronics. A theoretical model for the sliding-mode TENG is presented in this work. The finite element method was utilized to characterize the distributions of electric potential, electric field, and charges on the metal electrodes of the TENG.

Human skin based triboelectric nanogenerators for harvesting biomechanical energy and as self-powered active tactile sensor system.

We report human skin based triboelectric nanogenerators (TENG) that can either harvest biomechanical energy or be utilized as a self-powered tactile sensor system for touch pad technology. We constructed a TENG utilizing the contact/separation between an area of human skin and a polydimethylsiloxane (PDMS) film with a surface of micropyramid structures, which was attached to an ITO electrode that was grounded across a loading resistor. The fabricated TENG delivers an open-circuit voltage up to -1000 V, a short-circuit current density of 8 mA/m(2), and a power density of 500 mW/m(2) on a load of 100 MΩ, which can be used to directly drive tens of green light-emitting diodes.

Single-electrode-based sliding triboelectric nanogenerator for self-powered displacement vector sensor system.

We report a single-electrode-based sliding-mode triboelectric nanogenerator (TENG) that not only can harvest mechanical energy but also is a self-powered displacement vector sensor system for touching pad technology. By utilizing the relative sliding between an electrodeless polytetrafluoroethylene (PTFE) patch with surface-etched nanoparticles and an Al electrode that is grounded, the fabricated TENG can produce an open-circuit voltage up to 1100 V, a short-circuit current density of 6 mA/m(2), and a maximum power density of 350 mW/m(2) on a load of 100 MΩ, which can be used to instantaneously drive 100 green-light-emitting diodes (LEDs). The working mechanism of the TENG is based on the charge transfer between the Al electrode and the ground by modulating the relative sliding distance between the tribo-charged PTFE patch and the Al plate.

In situ quantitative study of nanoscale triboelectrification and patterning.

By combining contact-mode atomic force microscopy (AFM) and scanning Kevin probe microscopy (SKPM), we demonstrated an in situ method for quantitative characterization of the triboelectrification process at the nanoscale. We systematically characterized the triboelectric charge distribution, multifriction effect on charge transfer, as well as subsequent charge diffusion on the dielectric surface: (i) the SiO2 surface can be either positively or negatively charged through triboelectric process using Si-based AFM probes with and without Pt coating, respectively; (ii) the triboelectric charges accumulated from multifriction and eventually reached to saturated concentrations of (-150 ± 8) μC/m(2) and (105 ± 6) μC/m(2), respectively; (iii) the charge diffusion coefficients on SiO2 surface were measured to be (1.10 ± 0.

Linear-grating triboelectric generator based on sliding electrification.

The triboelectric effect is known for many centuries and it is the cause of many charging phenomena. However, it has not been utilized for energy harvesting until very recently. (1-5) Here we developed a new principle of triboelectric generator (TEG) based on a fully contacted, sliding electrification process, which lays a fundamentally new mechanism for designing universal, high-performance TEGs to harvest diverse forms of mechanical energy in our daily life.

Vertically aligned CdSe nanowire arrays for energy harvesting and piezotronic devices.

We demonstrated the energy harvesting potential and piezotronic effect in vertically aligned CdSe nanowire (NW) arrays for the first time. The CdSe NW arrays were grown on a mica substrate by the vapor-liquid-solid process using a CdSe thin film as seed layer and platinum as catalyst. High-resolution transmission electron microscopy image and selected area electron diffraction pattern indicate that the CdSe NWs have a wurtzite structure and growth direction along (0001).

[Correlation between psychopathological symptoms, coping style in adolescent and childhood repeated physical, emotional maltreatment].

Objective: To study possible relationship between psychopathological symptoms, positive and negative coping styles in adolescents who experienced repeated serious childhood physical abuse (CPA), moderate CPA, and childhood emotional abuse (CEA).

Methods: A total of 5453 students were recruited as subjects from 9 middle schools at grades 7, 8, 10, and 11. They provided informed consent and participated in the self-administered anonymous survey on their frequencies of serious or moderate physical abuse and emotional abuse by his/her parents or other caregivers about average times of experiencing maltreatment every year during primary school.