Selective orthotic constraint of lower limb movement during walking reveals new insights into neuromuscular adaptation.

Introduction: A concern expressed by the clinical community is that the constraint of motion provided by an ankle foot orthosis (AFO) may lead the user to become dependent on its stiffness, leading to learned non-use. To examine this, we hypothesized that using an experimental AFO-footwear combination (exAFO-FC) that constrains ankle motion during walking would result in reduced soleus and tibialis anterior EMG compared to free (exAFO-FC) and control (no AFO, footwear only) conditions.

Method: A total of 14 healthy subjects walked at their preferred speed (1.

Realizing the gravity of the simulation: adaptation to simulated hypogravity leads to altered predictive control.

Accurate predictive abilities are important for a wide variety of animal behaviors. Inherent to many of these predictions is an understanding of the physics that underlie the behavior. Humans are specifically attuned to the physics on Earth but can learn to move in other environments (e.

3D kinematics of tibiotalar motion in patients with mobile bearing and fixed bearing total ankle arthroplasty: In vivo videofluoroscopic feasibility study.

Background: As total ankle arthroplasty (TAA) is an increasingly common surgical intervention for patients with end-stage ankle arthritis, there is a need to better understand the dynamic performance of prosthetic implants during activities of daily living. Our purpose was to quantify and compare relative tibiotalar motion during gait in persons with a fixed-bearing (FB) and mobile-bearing (MB) total ankle arthroplasty. We hypothesized a FB prosthesis would have lower tibiotalar range of motion (ROM).

Gait quality in prosthesis users is reflected by force-based metrics when learning to walk on a new research-grade powered prosthesis.

Introduction: Powered prosthetic feet require customized tuning to ensure comfort and long-term success for the user, but tuning in both clinical and research settings is subjective, time intensive, and the standard for tuning can vary depending on the patient's and the prosthetist's experience levels.

Methods: Therefore, we studied eight different metrics of gait quality associated with use of a research-grade powered prosthetic foot in seven individuals with transtibial amputation during treadmill walking. We compared clinically tuned and untuned conditions with the goal of identifying performance-based metrics capable of distinguishing between good (as determined by a clinician) from poor gait quality.

Conservation tools: the next generation of engineering-biology collaborations.

The recent increase in public and academic interest in preserving biodiversity has led to the growth of the field of conservation technology. This field involves designing and constructing tools that use technology to aid in the conservation of wildlife. In this review, we present five case studies and infer a framework for designing conservation tools (CT) based on human-wildlife interaction.

Fascicle dynamics of the tibialis anterior muscle reflect whole-body walking economy.

Humans can inherently adapt their gait pattern in a way that minimizes the metabolic cost of transport, or walking economy, within a few steps, which is faster than any known direct physiological sensor of metabolic energy. Instead, walking economy may be indirectly sensed through mechanoreceptors that correlate with the metabolic cost per step to make such gait adaptations. We tested whether velocity feedback from tibialis anterior (TA) muscle fascicles during the early stance phase of walking could potentially act to indirectly sense walking economy.

The motor and the brake of the trailing leg in human walking: transtibial amputation limits ankle-knee torque covariation.

Lower-limb amputation limits inherent motor abundance in the locomotor system and impairs walking mechanics. Able-bodied walkers vary ankle torque to adjust step-to-step leg force production as measured by resultant ground reaction forces. Simultaneously, knee torque covaries with ankle torque to act as a brake, resulting in consistent peak leg power output measured by external mechanical power generated on the center of mass.

DeepLabCut increases markerless tracking efficiency in X-ray video analysis of rodent locomotion.

Despite the prevalence of rat models to study human disease and injury, existing methods for quantifying behavior through skeletal movements are problematic owing to skin movement inaccuracies associated with optical video analysis, or require invasive implanted markers or time-consuming manual rotoscoping for X-ray video approaches. We examined the use of a machine learning tool, DeepLabCut, to perform automated, markerless tracking in bi-planar X-ray videos of locomoting rats. Models were trained on 590 pairs of video frames to identify 19 unique skeletal landmarks of the pelvic limb.

Altering the tuning parameter settings of a commercial powered prosthetic foot to increase power during push-off may not reduce collisional work in the intact limb during gait.

Background: Increased knee osteoarthritis risk in patients with unilateral lower extremity limb loss is attributed to increased intact limb loading. Modulating powered ankle prosthesis push-off power may be an effective way to modulate intact limb loading. We examined how changes in the parameter settings of a commercial prosthetic ankle affect power delivery during push-off and the resulting collisional work experienced by the intact limb in persons with unilateral lower extremity limb loss.

Design and testing of a prototype foot orthosis that uses the principle of granular jamming.

Study Design: A mechanical testing protocol was used to compare the material properties of commercially available foams with that of a newly designed granular jamming orthosis prototypes.

Background: Foot orthoses have an inherent limitation of predetermined mechanical material properties coupled with a fixed orthotic interface shape that cannot be readily changed.

Objectives: To develop and test a novel orthotic insole design concept that incorporates principles of granular jamming.

Material properties and application of biomechanical principles provide significant motion control performance in experimental ankle foot orthosis-footwear combination.

Background: This study, the first of its kind, originated with the need for a brace (an ankle foot orthosis), to constrain ankle plantarflexion and dorsiflexion within a motion threshold of <5°. A conventional thermoplastic, solid brace failed during a quasi-static loading study, informing the investigation and development of an experimental carbon composite brace, maximizing stiffness and proximity of shank and foot cylindrical shells to provide the required degree of control.

Methods: Two experiments were conducted: a quasi-static loading study, using cadaveric limbs (n = 2), and a gait study with healthy subjects (n = 14).

A Lightweight Exoskeleton-Based Portable Gait Data Collection System.

For the controller of wearable lower-limb assistive devices, quantitative understanding of human locomotion serves as the basis for human motion intent recognition and joint-level motion control. Traditionally, the required gait data are obtained in gait research laboratories, utilizing marker-based optical motion capture systems. Despite the high accuracy of measurement, marker-based systems are largely limited to laboratory environments, making it nearly impossible to collect the desired gait data in real-world daily-living scenarios.

Progressive adaptation of whole-limb kinematics after peripheral nerve injury.

The ability to recover purposeful movement soon after debilitating neuromuscular injury is essential to animal survival. Various neural and mechanical mechanisms exist to preserve whole-limb kinematics despite exhibiting long-term deficits of individual joints following peripheral nerve injury. However, it is unclear whether functionally relevant whole-limb movement is acutely conserved following injury.

Development and Assessment of a Low-Cost Clinical Gait Analysis System.

Clinically, measuring gait kinematics and ground reaction force (GRF) is useful to determine the effectiveness of treatment. However, it is inconvenient and expensive to maintain a laboratory-grade gait analysis system in most clinics. The purpose of this study was to validate a Wii Balance Board, Kinovea motion-tracking software, and a video camera as a portable, low-cost system, and overground gait analysis system.

Wireless Implantable Sensor for Noninvasive, Longitudinal Quantification of Axial Strain Across Rodent Long Bone Defects.

Bone development, maintenance, and regeneration are remarkably sensitive to mechanical cues. Consequently, mechanical stimulation has long been sought as a putative target to promote endogenous healing after fracture. Given the transient nature of bone repair, tissue-level mechanical cues evolve rapidly over time after injury and are challenging to measure noninvasively.

Changes in mechanical work during neural adaptation to asymmetric locomotion.

Minimizing whole-body metabolic cost has been suggested to drive the neural processes of locomotor adaptation. Mechanical work performed by the legs should dictate the major changes in whole-body metabolic cost of walking while providing greater insight into temporal and spatial mechanisms of adaptation. We hypothesized that changes in mechanical work by the legs during an asymmetric split-belt walking adaptation task could explain previously observed changes in whole-body metabolic cost.

Mechanical evidence that flamingos can support their body on one leg with little active muscular force.

Flamingos (Phoenicopteridae) often stand and sleep on one leg for long periods, but it is unknown how much active muscle contractile force they use for the mechanical demands of standing on one leg: body weight support and maintaining balance. First, we demonstrated that flamingo cadavers could passively support body weight on one leg without muscle activity while adopting a stable, unchanging, joint posture resembling that seen in live flamingos. By contrast, the cadaveric flamingo could not be stably held in a two-legged pose, suggesting a greater necessity for active muscle force to stabilize two-legged versus one-legged postures.

Two biomechanical strategies for locomotor adaptation to split-belt treadmill walking in subjects with and without transtibial amputation.

Locomotor adaptation is commonly studied using split-belt treadmill walking, in which each foot is placed on a belt moving at a different speed. As subjects adapt to split-belt walking, they reduce metabolic power, but the biomechanical mechanism behind this improved efficiency is unknown. Analyzing mechanical work performed by the legs and joints during split-belt adaptation could reveal this mechanism.

The motor and the brake of the trailing leg in human walking: leg force control through ankle modulation and knee covariance.

Human walking is a complex task, and we lack a complete understanding of how the neuromuscular system organizes its numerous muscles and joints to achieve consistent and efficient walking mechanics. Focused control of select influential task-level variables may simplify the higher-level control of steady-state walking and reduce demand on the neuromuscular system. As trailing leg power generation and force application can affect the mechanical efficiency of step-to-step transitions, we investigated how joint torques are organized to control leg force and leg power during human walking.

Biomechanics of the human walk-to-run gait transition in persons with unilateral transtibial amputation.

Propulsive force production (indicative of intrinsic force-length-velocity characteristics of the plantar flexor muscles) has been shown to be a major determinant of the human walk-to-run transition. The purpose of this work was to determine the gait transition speed of persons with unilateral transtibial amputation donning a passive-elastic prosthesis and assess whether a mechanical limit of their intact side plantar flexor muscles is a major determinant of their walk-to-run transition. We determined each individual׳s gait transition speed (GTS) via an incremental protocol and assessed kinetics and kinematics during walking at speeds 50%, 60%, 70%, 80%, 90%, 100%, 120%, and 130% of that gait transition speed (100%:GTS).

Locomotor control of limb force switches from minimal intervention principle in early adaptation to noise reduction in late adaptation.

During movement, errors are typically corrected only if they hinder performance. Preferential correction of task-relevant deviations is described by the minimal intervention principle but has not been demonstrated in the joints during locomotor adaptation. We studied hopping as a tractable model of locomotor adaptation of the joints within the context of a limb-force-specific task space.

Humans robustly adhere to dynamic walking principles by harnessing motor abundance to control forces.

Human walking dynamics are typically framed in the context of mechanics and energetics rather than in the context of neuromuscular control. Dynamic walking principles describe one helpful theoretical approach to characterize efficient human walking mechanics over many steps. These principles do not, however, address how such walking is controlled step-by-step despite small perturbations from natural variability.

Rules to limp by: joint compensation conserves limb function after peripheral nerve injury.

Locomotion persists across all manner of internal and external perturbations. The objective of this study was to identify locomotor compensation strategies in rodent models of peripheral nerve injury. We found that hip-to-toe limb length and limb angle was preferentially preserved over individual joint angles after permanent denervation of rat ankle extensor muscles.

Effects of a foot placement constraint on use of motor equivalence during human hopping.

Humans can robustly locomote over complex terrains even while simultaneously attending to other tasks such as accurate foot placement on the ground. We investigated whether subjects would exploit motor redundancy across the joints of the leg to stabilize overall limb kinematics when presented with a hopping task that constrained foot placement position. Subjects hopped in place on one leg (2.

Force-sensitive afferents recruited during stance encode sensory depression in the contralateral swinging limb during locomotion.

Afferent feedback alters muscle activity during locomotion and must be tightly controlled. As primary afferent depolarization-induced presynaptic inhibition (PAD-PSI) regulates afferent signaling, we investigated hindlimb PAD-PSI during locomotion in an in vitro rat spinal cord-hindlimb preparation. We compared the relation of PAD-PSI, measured as dorsal root potentials (DRPs), to observed ipsilateral and contralateral limb endpoint forces.