Publications by authors named "Yoshinari Awaji"

The remote delivery of optical reference with highly stable oscillation frequency and carrier phase can eliminate the need of digital signal processing for the estimation of these parameters in optical communication. The distribution distance of the optical reference has been limited, however. In this paper, an optical reference distribution over 12,600 km is achieved while maintaining low-noise characteristics, using an ultra-narrow-linewidth laser as a reference source and a fiber Bragg grating filter for noise removal.

View Article and Find Full Text PDF

A software-defined optical receiver is implemented on an off-the-shelf commercial graphics processing unit (GPU). The receiver provides real-time signal processing functionality to process 1 GBaud minimum phase (MP) 4-, 8-, 16-, 32-, 64-, 128-ary quadrature amplitude modulation (QAM) as well as geometrically shaped (GS) 8- and 128-QAM signals using Kramers-Kronig (KK) coherent detection. Experimental validation of this receiver over a 91 km field-deployed optical fiber link between two Tokyo locations is shown with detailed optical signal-to-noise ratio (OSNR) investigations.

View Article and Find Full Text PDF

This work demonstrates the use of bidirectional Raman amplification to achieve an unrepeatered 234 km link using standard single mode fibers and with a capacity×distance product of 21.132 Pb/s·km. A throughput above 90 Tb/s is achieved with an 87 nm wavelength-division multiplexed signal carrying 424 PDM-64QAM signals at 24.

View Article and Find Full Text PDF

We investigate optical transmission of an ultra-wideband signal in a standard single mode fiber. Using a near continuous optical bandwidth exceeding 157 nm across the S-, C- and L-bands, we combine doped-fiber amplifiers covering S, C and L-bands with distributed Raman amplification to enable high-quality transmission of polarization division multiplexed (PDM)-256-quadrature-amplitude modulation (QAM) signals over a 54 km standard single-mode fiber. We receive 793 × 24.

View Article and Find Full Text PDF

Data rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core.

View Article and Find Full Text PDF

This work compares the random time-varying crosstalk in homogeneous multi-core fibers measured using different types of light sources with linewidths ranging from 100 Hz to 2.5 MHz. We show that the frequency stability of the light source plays a significant role on the quality of short-term average crosstalk measurements with no observable impact from laser linewidth.

View Article and Find Full Text PDF
Article Synopsis
  • The study demonstrates the transmission of high-speed signals (24.5 GBaud) using quadrature phase shift keying and 16/64-quadrature amplitude modulation over 55 km of few-mode fibers in the S-band wavelength range (1492 nm to 1518 nm).
  • The optical signals were generated using a wideband optical comb source which provided over 120 nm of bandwidth, showing good performance despite being originally optimized for different wavelengths.
  • However, the system experienced reduced performance (Q-factor penalties) at the lower and upper edges of the S-band due to issues with the transceiver components and optical signal quality.
View Article and Find Full Text PDF

Master-slave carrier recovery is a digital signal processing technique that uses correlated phase noise in multi-channel receivers to eliminate redundant carrier recovery blocks. In this paper we experimentally investigate the performance of master-slave carrier recovery for multicore fiber transmission in the presence of inter-channel nonlinear interference. Using a triple parallel loop setup we jointly receive three spatial channels in a 7-core fiber for transmission distances of up to 1600 km.

View Article and Find Full Text PDF

We propose and evaluate the use of spatial-division multiplexing (SDM) multiple input multiple output (MIMO) systems to support long distance transmission using single-mode homogeneous multicore fibers. We show that on a uniform link with per-span inter-core skew compensation, the required SDM-MIMO memory length corresponds to the largest inter-core skew per span on the link. Furthermore, we show that with inter-core skew compensation, the required memory length of the SDM-MIMO is nearly constant with the transmission distance for accumulated crosstalk below -11 dB.

View Article and Find Full Text PDF

This paper discusses spatially diverse optical vector network analysis for space division multiplexing (SDM) component and system characterization, which is becoming essential as SDM is widely considered to increase the capacity of optical communication systems. Characterization of a 108-channel photonic lantern spatial multiplexer, coupled to a 36-core 3-mode fiber, is experimentally demonstrated, extracting the full impulse response and complex transfer function matrices as well as insertion loss (IL) and mode-dependent loss (MDL) data. Moreover, the mode-mixing behavior of fiber splices in the few-mode multi-core fiber and their impact on system IL and MDL are analyzed, finding splices to cause significant mode-mixing and to be non-negligible in system capacity analysis.

View Article and Find Full Text PDF
Article Synopsis
  • Adaptive direct-detection orthogonal frequency-division multiplexing (DD-OFDM) is introduced to maintain signal quality in multicore fiber links affected by unpredictable intercore crosstalk (ICXT).
  • The experiment monitored both ICXT power and DD-OFDM performance over 210 hours, demonstrating that fluctuations in ICXT can significantly impact bit error ratios (BER) for fixed modulation systems.
  • The study suggests that using adaptive modulation techniques, specifically adaptive OFDM, can effectively minimize BER fluctuations and maintain high throughput, achieving an average of 12 Gb/s with only a 9% reduction compared to optimal conditions without ICXT.
View Article and Find Full Text PDF

Inter-core crosstalk is a potential limitation on the achievable data-rates in optical fiber transmission systems using multi-core fibers. Crosstalk arises from unwanted coupling between cores of a homogenous multi-core fiber and it's average power has been observed to vary over time by 10s of decibels, potentially requiring an additional performance margin to achieve acceptable outage probability. Most investigations of crosstalk have so far only considered continuous wave laser light or amplified spontaneous emission as sources of crosstalk.

View Article and Find Full Text PDF

We experimentally investigate single-parity check (SPC) coded spatial superchannels based on polarization-multiplexed 16-ary quadrature amplitude modulation (PM-16QAM) for multicore fiber transmission systems, using a 7-core fiber. We investigate SPC over 1, 2, 4, 5 or 7 cores in a back-to-back configuration and compare the sensitivity to uncoded PM-16QAM, showing that at symbol rates of 20 Gbaud and at a bit-error-rate (BER) of 10, the SPC superchannels exhibit sensitivity improvements of 2.7 dB, 2.

View Article and Find Full Text PDF

We investigate a high-capacity, space-division-multiplexed (SDM) transmission system using self-homodyne detection (SHD) in multi-core fiber (MCF). We first investigate SHD phase noise cancellation with both kHz and MHz range linewidths for both quadrature-phase shift-keyed (QPSK) and 16 quadrature-amplitude modulation (16QAM) signals, finding that phase noise cancellation in SHD enabled transmission with MHz linewidth lasers that resulted in error floors when using intradyne detection. We then demonstrate a high throughput SHD transmission system using low-cost, MHz linewidth distributed feedback lasers.

View Article and Find Full Text PDF

We report the development of a space division multiplexed (SDM) transmission system consisting of a 19-core fiber and 19-core Erbium-doped fiber amplifier (EDFA). A new 19-core fiber with an improved core arrangement was employed to achieve a low aggregated inter-core crosstalk of -42 dB at 1550 nm over 30 km. The EDFA uses shared free-space optics for pump beam combining and isolation, thus is SDM transparent and has some potential for cost reduction.

View Article and Find Full Text PDF
Article Synopsis
  • The study explores how burst-mode EDFA (Erbium-Doped Fiber Amplifiers) performs in a network that combines both optical packets and circuit paths, focusing on how they handle dynamic assignments on the same fibers.
  • It investigates the effects of gain transients—short-term changes in amplifier gain—on network performance and compares the new BM-EDFA with traditional EDFA methods including automatic gain control.
  • Initial tests measure gain transients in a controlled environment before assessing frame error rates in a real network to evaluate overall performance.
View Article and Find Full Text PDF

We investigate the performance of a self-homodyne coherent detection (SHCD) system using a 19 core multi-core fiber (MCF) and 16 wavelength-division-multiplexed channels. We show that SHCD, with the pilot-tone transmitted on a single MCF core and information carrying signals on the remaining cores, is compatible with space-division-multiplexed transmission, potentially relaxing laser linewidth and digital signal processing requirements due to phase noise cancellation. However, inter-core crosstalk can have an impact on performance and core selection.

View Article and Find Full Text PDF

We demonstrated, for the first time, a field trial of 160 (16 lambda x 10) Gbit/s, fine granularity, DWDM-based optical packet switching and transmission by newly-developed burst-mode EDFAs and an optical packet switch prototype with multiple all-optical label processors. We achieved 64 km field transmission and switching of 160 (16 lambda x 10) Gbit/s DWDM-based optical packets encapsulating almost 10 Gbit/s IP packets with error-free operation (IP-packet-loss-rate <10(-6) and bit-error-rate <10(-9)).

View Article and Find Full Text PDF