Polarisation Control in Arrays of Microlenses and Gratings: Performance in Visible-IR Spectral Ranges.

Microlens arrays (MLAs) which are increasingly popular micro-optical elements in compact integrated optical systems were fabricated using a femtosecond direct laser write (fs-DLW) technique in the low-shrinkage SZ2080 photoresist. High-fidelity definition of 3D surfaces on IR transparent CaF substrates allowed to achieve ∼50% transmittance in the chemical fingerprinting spectral region 2-5 μm wavelengths since MLAs were only ∼10 μm high corresponding to the numerical aperture of 0.3 (the lens height is comparable with the IR wavelength).

Structure and Optical Anisotropy of Spider Scales and Silk: The Use of Chromaticity and Azimuth Colors to Optically Characterize Complex Biological Structures.

Herein, we give an overview of several less explored structural and optical characterization techniques useful for biomaterials. New insights into the structure of natural fibers such as spider silk can be gained with minimal sample preparation. Electromagnetic radiation (EMR) over a broad range of wavelengths (from X-ray to THz) provides information of the structure of the material at correspondingly different length scales (nm-to-mm).

Si-Cr Nano-Alloys Fabricated by Direct Femtosecond Laser Writing.

Ultra-short 230 fs laser pulses of 515 nm wavelength were tightly focused into 700 nm focal spots and utilised in opening ∼400 nm nano-holes in a Cr etch mask that was tens-of-nm thick. The ablation threshold was found to be 2.3 nJ/pulse, double that of plain silicon.

Metasurfaces as Energy Valves for Sustainable Energy Management.

Control of light absorption and transmission by metal-insulator-metal (MIM) metasurfaces are promising for applications in optical windows. This study shows the realization of photo-thermal energy conversion for radiative cooling by MIM metasurfaces with thin metal substrate and Indium-Tin-Oxide (ITO). High transparency of ITO at visible wavelengths and high absorption at mid-infrared wavelengths were realized for future applications of efficient cooling or heating applicable for living and working spaces.

Polariscopy with optical near-fields.

Polarisation analysis of light-matter interactions established for propagating optical far-fields is now extended into an evanescent field as demonstrated in this study using an attenuated total reflection (ATR) setup and a synchrotron source at THz frequencies. Scalar intensity , rather than a vector -field, is used for absorbance analysis of the s- and p-components of the linearly polarised incident light. Absorption and phase changes induced by the sample and detected at the transmission port of the ATR accessory revealed previously non-accessible anisotropy in the absorption-dispersion properties of the sample probed by the evanescent optical near-field.

Absorption and scattering in perfect thermal radiation absorber-emitter metasurfaces.

Detailed spectral analysis of radiation absorption and scattering behaviors of metasurfaces was carried out via finite-difference time-domain (FDTD) photonic simulations. It revealed that, for typical metal-insulator-metal (MIM) nanodisc metasurfaces, absorbance and scattering cross-sections exhibit a ratio of σ/σ = 1 at the absorption peak spectral position. This relationship was likewise found to limit the attainable photo-thermal conversion efficiency in experimental and application contexts.

Characterization of the Depth of Discharge-Dependent Charge Transfer Resistance of a Single LiFePO Particle.

The discharged state affects the charge transfer resistance of lithium-ion secondary batteries (LIBs), which is referred to as the depth of discharge (DOD). To understand the intrinsic charge/discharge property of LIBs, the DOD-dependent charge transfer resistance at the solid-liquid interface is required. However, in a general composite electrode, the conductive additive and organic polymeric binder are unevenly distributed, resulting in a complicated electron conduction/ion conduction path.

Broadband mid-infrared amplified spontaneous emission from Er/Dy co-doped fluoride fiber with a simple diode-pumped configuration.

Er/Dy co-doped double-clad ZBLAN optical fiber has been used to obtain amplified spontaneous emission (ASE) broadband light sources cladding-pumped by 980-nm multimode laser diode (LD) sources. It has been demonstrated that mid-infrared broadband emission extending from 2515 to 3735 nm was obtained by energy transfer between Er and Dy. We experimentally investigated the optimum design of Er/Dy co-doped ZBLAN fiber in terms of ion concentration, fiber length, pumping configuration, and pumping power.

Second Harmonic Generation from Phase-Engineered Metasurfaces of Nanoprisms.

Metasurfaces of gold (Au) nanoparticles on a SiO2-Si substrate were fabricated for the enhancement of second harmonic generation (SHG) using electron beam lithography and lift-off. Triangular Au nanoprisms which are non-centro-symmetric and support second-order nonlinearity were examined for SHG. The thickness of the SiO2 spacer is shown to be an effective parameter to tune for maximising SHG.

Improvement and stabilization of optical hydrogen sensing ability of Au-Pd alloys.

Formation of metal hydrides is a signature chemical property of hydrogen and it can be leveraged to enact both storage and detection of this technologically important yet extremely volatile gas. Palladium shows particular promise as a hydrogen storage medium as well as a platform for creating rapid and reliable H optical sensor devices. Furthermore, alloying Pd with other noble metals provides a technologically simple yet powerful way of enacting control over the structural and catalytic properties of the resultant material.

Kirchhoff's Thermal Radiation from Lithography-Free Black Metals.

Lithography-free black metals composed of a nano-layered stack of materials are attractive not only due to their optical properties but also by virtue of fabrication simplicity and the cost reduction of devices based on such structures. We demonstrate multi-layer black metal layered structures with engineered electromagnetic absorption in the mid-infrared (MIR) wavelength range. Characterization of thin SiO2 and Si films sandwiched between two Au layers by way of experimental electromagnetic radiation absorption and thermal radiation emission measurements as well as finite difference time domain (FDTD) numerical simulations is presented.

Direct Measurement of Temperature Diffusivity of Nanocellulose-Doped Biodegradable Composite Films.

The thermal properties of novel nanomaterials play a significant role in determining the performance of the material in technological applications. Herein, direct measurement of the temperature diffusivity of nanocellulose-doped starch-polyurethane nanocomposite films was carried out by the micro-contact method. Polymer films containing up to 2 wt%.

Tilted black-Si: ∼0.45 form-birefringence from sub-wavelength needles.

The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of θ < 50 - 70 (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15 min etching was d ∼ 200 nm and had a 100 μm width of the optical retardance/birefringence, characterised using polariscopy. The height of the b-Si needles corresponds closely to the skin-depth of Si ∼λ/4 for the visible spectral range.

Detailed Experiment-Theory Comparison of Mid-Infrared Metasurface Perfect Absorbers.

Realisation of a perfect absorber A = 1 with transmittance and reflectance T = R = 0 by a thin metasurface is one of the hot topics in recent nanophotonics prompted by energy harvesting and sensor applications ( A + R + T = 1 is the energy conservation). Here we tested the optical properties of over 400 structures of metal-insulator-metal (MIM) metasurfaces for a range of variation in thickness of insulator, diameter of a disc and intra-disc distance both experimentally and numerically. Conditions of a near perfect absorption A > 95 % with simultaneously occurring anti-reflection property ( R < 5 % ) was experimentally determined.

Black Metals: Optical Absorbers.

We demonstrate a concept and fabrication of lithography-free layered metal-SiO2 thin-film structures which have reduced reflectivity (black appearance), to as low as 0.9%, with 4.9% broadband reflectance (8.

Characteristics of Highly Sensitive Hydrogen Sensor Based on Pt-WO/Si Microring Resonator.

Hydrogen gas has attracted attention as a new energy carrier, and simple but highly sensitive hydrogen sensors are required. We fabricated an optical hydrogen sensor based on a silicon microring resonator (MRR) with tungsten oxide (WO) using a complementary metal-oxide-semiconductor (CMOS)-compatible process for the MRR and a sol-gel method for the WO layer and investigated its sensing characteristics at device temperatures of 5, 20, and 30 °C. At each temperature, a hydrogen concentration of as low as 0.

Metamaterial for Hydrogen Sensing.

A hydrogen sensor based on plasmonic metasurfaces is demonstrated to exhibit the industry-required 10 s reaction time and sensitivity. It consists of a layer of either Y or WO sandwiched between a top Pd nanodisk and a Au mirror at the base. The phase change layer (Y, WO) reacts with hydrogen, and the corresponding change of the refractive index (permittivity) is detected by the spectral shift of the resonance dip in reflectance at the IR spectral window.

Structural development of a type-1 ryanodine receptor (RyR1) Ca-release channel inhibitor guided by endoplasmic reticulum Ca assay.

Type-1 ryanodine receptor (RyR1) is a calcium-release channel localized on sarcoplasmic reticulum (SR) of the skeletal muscle, and mediates muscle contraction by releasing Ca from the SR. Genetic mutations of RyR1 are associated with skeletal muscle diseases such as malignant hyperthermia and central core diseases, in which over-activation of RyR1 causes leakage of Ca from the SR. We recently developed an efficient high-throughput screening system based on the measurement of Ca in endoplasmic reticulum, and used it to identify oxolinic acid (1) as a novel RyR1 channel inhibitor.

Kirchhoff's metasurfaces towards efficient photo-thermal energy conversion.

Thermo-optical properties of the nanodisc and metal hole array plasmonic perfect absorber (PPA) metasurfaces were designed and characterized at mid-infrared wavelengths. Both, radiation emitter and detector systems operating in various spectral domains are highly sought after for a diverse range of applications, one example being future sensor networks employed in the internet-of-things. Reciprocity of the absorbance and emittance is shown experimentally, i.

First Principles Calculations Toward Understanding SERS of 2,2'-Bipyridyl Adsorbed on Au, Ag, and Au-Ag Nanoalloy.

First principles electrodyanmics and quantum chemical simulations are performed to gain insights into the underlying mechanisms of the surface enhanced Raman spectra of 22BPY adsorbed on pure Au and Ag as well as on Au-Ag alloy nanodiscs. Experimental SERS spectra from Au and Ag nanodiscs show similar peaks, whereas those from Au-Ag alloy reveal new spectral features. The physical enhancement factors due to surface nano-texture were considered by numerical FDTD simulations of light intensity distribution for the nano-textured Au, Ag, and Au-Ag alloy and compared with experimental results.

Ion-sensitive photonic-crystal nanolaser sensors.

In general, biochemical sensors based on photonic cavities are used to detect changes in the refractive index of the environment. In this study, however, a GaInAsP semiconductor photonic-crystal nanolaser sensor that we recently developed was found to detect not only the environmental refractive index but also the surface charge. In contrast to the pH sensitivity we reported previously, this is an ultra-sensitive detection mechanism capable of identifying proteins and deoxyribonucleic acids (DNA) at a femtomolar-order or lower concentrations.

Optical readout of hydrogen storage in films of Au and Pd.

For hydrogen sensor and storage applications, films of Au and Pd were (i) co-sputtered at different rates or (ii) deposited in a sequentially alternating fashion to create a layered structure on a cover glass. Peculiarities of hydrogen uptake and release were optically monitored using 1.3 μm wavelength light.

Au-Ag-Cu nano-alloys: tailoring of permittivity.

Precious metal alloys enables new possibilities to tailor materials for specific optical functions. Here we present a systematic study of the effects of a nanoscale alloying on the permittivity of Au-Ag-Cu metals at 38 different atomic mixing ratios. The permittivity was measured and analyzed numerically by applying the Drude model.

Living-cell imaging using a photonic crystal nanolaser array.

We proposed and demonstrated a label-free imaging method for living cells using a GaInAsP H0-type photonic crystal nanolaser array. We integrated 441 nanolasers in an arrayed configuration and achieved photopumped lasing with a 100% yield. Then, we attached HeLa cells on it, measured the wavelengths of all nanolasers and used them as pixel information.

Randomization of gold nano-brick arrays: a tool for SERS enhancement.

Surface enhanced Raman scattering (SERS) was measured on periodic and randomly arranged patterns of Au nano-bricks (rectangular parallelepipeds). Resonant SERS conditions were investigated of a near-IR dye deposited on nanoparticles. Random mixtures of Au nano-bricks with different aspect ratio R showed stronger SERS enhancement as compared to periodic patterns with constant aspect ratio (R varies from 1 to 4).