Interfacial Engineering at Quantum Dot-Sensitized TiO Photoelectrodes for Ultrahigh Photocurrent Generation.

Metal oxide semiconductor/chalcogenide quantum dot (QD) heterostructured photoanodes show photocurrent densities >30 mA/cm with ZnO, approaching the theoretical limits in photovoltaic (PV) cells. However, comparative performance has not been achieved with TiO. Here, we applied a TiO(B) surface passivation layer (SPL) on TiO/QD (PbS and CdS) and achieved a photocurrent density of 34.

Bipolar Membranes to Promote Formation of Tight Ice-Like Water for Efficient and Sustainable Water Splitting.

Bipolar membranes (BPMs) have recently received much attention for their potential to improve the water dissociation reaction (WDR) at their junction by utilizing catalysts. Herein, composite catalysts (Fe O @GO) comprising hematite nanoparticles (α-Fe O ) grown on 2D graphene oxide (GO) nanosheets are reported, which show unprecedentedly high water dissociation performance in the BPM. Furthermore, new catalytic roles in facilitating WDR at the catalyst-water interface are mechanistically elucidated.

An artificial solid interphase with polymers of intrinsic microporosity for highly stable Li metal anodes.

Polymers of intrinsic microporosity (PIM-1) have an appropriate pore size to reduce the solvation number of Li ions in electrolytes. This unique pore structure of PIM-1 as a solid interphase can suppress transport of solvent and consequently unwanted chemical reactions at the interface of anodes, thereby extending the cycle life of Li metal anodes.

Nanocomposite Membranes Comprising Crosslinked Polymer Blends of Poly(vinyl alcohol)/Poly(styrene sulfonic acid--maleic acid) and Fumed Silica Nanoparticles.

Nanocomposite polymer electrolyte membranes comprising a crosslinked polymer blend of poly(vinyl alcohol)/poly(styrene sulfonic acid-co-maleic acid) (PVA/PSSA-co-MA) and fumed silica nanoparticles were prepared for direct methanol fuel cell (DMFC) applications. Silica nanoparticles could be incorporated well uniformly in the completely miscible system, which can form a three-dimensional network structure to achieve the enhancement of mechanical properties as well as the additional reduction of methanol permeability. The optimized proton conductivities and methanol permeability of the PVA/PSSA-co-MA membrane with silica nanoparticles of 10 wt.

Imidazolium Iodide-Doped PEDOT Nanofibers as Conductive Catalysts for Highly Efficient Solid-State Dye-Sensitized Solar Cells Employing Polymer Electrolyte.

The electrical conductivity and catalytic activity of nanofibrous poly(3,4-ethylenedioxythiophene)s (PEDOT NFs) was improved by redoping with dimethyl imidazolium iodide (DMII) as a charge transfer facilitator. Addition of the new DMII dopant into the PEDOT NFs reduced the concentration of dodecyl sulfate anions (DS) predoped during the polymerization process and concomitantly enhanced the doping concentration of I by ion exchange. Redoping with DMII increased the mobility of the PEDOT NFs by up to 18-fold and improved the conductivity due to the enhanced linearization, suppressed aggregation, and improved crystallinity of the PEDOT chains.

Dual-Function Au@YO:Eu Smart Film for Enhanced Power Conversion Efficiency and Long-Term Stability of Perovskite Solar Cells.

In the present study, a dual-functional smart film combining the effects of wavelength conversion and amplification of the converted wave by the localized surface plasmon resonance has been investigated for a perovskite solar cell. This dual-functional film, composed of Au nanoparticles coated on the surface of YO:Eu phosphor (Au@YO:Eu) nanoparticle monolayer, enhances the solar energy conversion efficiency to electrical energy and long-term stability of photovoltaic cells. Coupling between the YO:Eu phosphor monolayer and ultraviolet solar light induces the latter to be converted into visible light with a quantum yield above 80%.

Triumphing over Charge Transfer Limitations of PEDOT Nanofiber Reduction Catalyst by 1,2-Ethanedithiol Doping for Quantum Dot Solar Cells.

Charge transfer between a conducting polymer-based counter electrode (CE) and a polysulfide (S/S) electrolyte mediator is a key limitation to improvements of solar energy conversion efficiency (ECE) in quantum-dot-sensitized solar cells (QDSCs). In this paper, 1,2-ethanedithiol (EDT) was doped into nanofibrous poly(3,4-ethylenedioxythiophene) (PEDOT NF) to overcome the charge transfer limitation between PEDOT NF and S/S. EDT not only helps to reduce the aggregation and thus enhance the linearization of the PEDOT chains but also changes the molecular conformation of the PEDOT chains from a benzoid to a quinoid structure.

Strongly Coupled Cyclometalated Ruthenium Triarylamine Chromophores as Sensitizers for DSSCs.

A series of anchor-functionalized cyclometalated bis(tridentate) ruthenium(II) triarylamine hybrids [Ru(dbp-X)(tctpy)](2-) [2 a](2-) -[2 c](2-) (H3 tctpy=2,2';6',2''-terpyridine-4,4',4''-tricarboxylic acid; dpbH=1,3-dipyridylbenzene; X=N(4-C6 H4 OMe)2 ([2 a](2-) ), NPh2 ([2 b](2-) ), N-carbazolyl [2 c](2-) ) was synthesized and characterized. All complexes show broad absorption bands in the range 300-700 nm with a maximum at about 545 nm. Methyl esters [Ru(Me3 tctpy)(dpb-X)](+) [1 a](+) -[1 c](+) are oxidized to the strongly coupled mixed-valent species [1 a](2+) -[1 c](2+) and the Ru(III) (aminium) complexes [1 a](3+) -[1 c](3+) at comparably low oxidation potentials.

Interfacial Degradation of Planar Lead Halide Perovskite Solar Cells.

The stability of perovskite solar cells is one of the major challenges for this technology to reach commercialization, with water believed to be the major degradation source. In this work, a range of devices containing different cathode metal contacts in the configuration ITO/PEDOT:PSS/MAPbI3/PCBM/Metal are fully electrically characterized before and after degradation caused by steady illumination during 4 h that induces a dramatic reduction in power conversion efficiency from values of 12 to 1.8%.

Exploring Interfacial Events in Gold-Nanocluster-Sensitized Solar Cells: Insights into the Effects of the Cluster Size and Electrolyte on Solar Cell Performance.

Gold nanoclusters (Au NCs) with molecule-like behavior have emerged as a new light harvester in various energy conversion systems. Despite several important strides made recently, efforts toward the utilization of NCs as a light harvester have been primarily restricted to proving their potency and feasibility. In solar cell applications, ground-breaking research with a power conversion efficiency (PCE) of more than 2% has recently been reported.

Accelerated CO2 transport on surface of AgO nanoparticles in ionic liquid BMIMBF4.

The AgO nanoparticles were utilized for a CO2 separation membrane. The AgO nanoparticles were successfully generated in ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate (BMIMBF4) by favorable interaction between the surface of particles and the counteranion of BMIMBF4. The generated AgO nanoparticles were confirmed by TEM, and the average size was 20 nm.

Surface Modification of TiO2 Photoanodes with Fluorinated Self-Assembled Monolayers for Highly Efficient Dye-Sensitized Solar Cells.

Dye aggregation and electron recombination in TiO2 photoanodes are the two major phenomena lowering the energy conversion efficiency of dye-sensitized solar cells (DSCs). Herein, we introduce a novel surface modification strategy of TiO2 photoanodes by the fluorinated self-assembled monolayer (F-SAM) formation with 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFTS), blocking the vacant sites of the TiO2 surface after dye adsorption. The F-SAM helps to efficiently lower the surface tension, resulting in efficient repelling ions, e.

Excellent optical and interfacial performance of a PEDOT-b-PEG block copolymer counter electrode for polymer electrolyte-based solid-state dye-sensitized solar cells.

A poly(3,4-ethylenedioxythiophene)-b-poly(ethylene glycol) (PEDOT-b-PEG) block copolymer doped with perchlorate on FTO shows excellent optical and interfacial performance as a counter electrode (CE), such as low charge transfer resistance and low reflectivity for polymer electrolyte-based solid-state dye-sensitized solar cells (DSCs), resulting in 8.45% energy conversion efficiency, greater than the common Pt CE, via a facile room-temperature process.

Photoinduced Giant Dielectric Constant in Lead Halide Perovskite Solar Cells.

Organic-inorganic lead trihalide perovskites have emerged as an outstanding photovoltaic material that demonstrated a high 17.9% conversion efficiency of sunlight to electricity in a short time. We have found a giant dielectric constant (GDC) phenomenon in these materials consisting on a low frequency dielectric constant in the dark of the order of ε0 = 1000.

Slow Dynamic Processes in Lead Halide Perovskite Solar Cells. Characteristic Times and Hysteresis.

Characteristic times of perovskite solar cells (PSCs) have been measured by different techniques: transient photovoltage decay, transient photoluminescence, and impedance spectroscopy. A slow dynamic process is detected that shows characteristic times in the seconds to milliseconds scale, with good quantitative agreement between transient photovoltage decay and impedance spectroscopy. Here, we show that this characteristic time is related with a novel slow dynamic process caused by the peculiar structural properties of lead halide perovskites and depending on perovskite crystal size and organic cation nature.

Electrochemical and in vitro bioactivity of polypyrrole/ceramic nanocomposite coatings on 316L SS bio-implants.

The present investigation describes the versatile fabrication and characterization of a novel composite coating that consists of polypyrrole (PPy) and Nb2O5 nanoparticles. Integration of the two materials is achieved by electrochemical deposition on 316L stainless steel (SS) from an aqueous solution of oxalic acid containing pyrrole and Nb2O5 nanoparticles. Fourier transform infrared spectral (FTIR) and X-ray diffraction (XRD) studies revealed that the existence of Nb2O5 nanoparticles in PPy matrix with hexagonal structure.

Enhanced photocatalytic performance at a Au/N-TiO₂ hollow nanowire array by a combination of light scattering and reduced recombination.

We demonstrate one-step gold nanoparticle (AuNP) coating and the surface nitridation of TiO2 nanowires (TiO2-NWs) to amplify visible-light photon reflection. The surface nitridation of TiO2-NW arrays maximizes the anchoring of AuNPs, and the subsequent reduction of the band gap energy from 3.26 eV to 2.

Densely packed siloxane barrier for blocking electron recombination in dye-sensitized solar cells.

A challenge in developing photovoltaic devices is to minimize the loss of electrons, which can seriously deteriorate energy conversion efficiency. In particular, minimizing this negative process in dye-sensitized solar cells (DSCs) is imperative. Herein, we use three different kinds of siloxanes, which are adsorbable to titania surfaces and polymerizable in forming a surface passivation layer, to reduce the electron loss.

Toward Higher Energy Conversion Efficiency for Solid Polymer Electrolyte Dye-Sensitized Solar Cells: Ionic Conductivity and TiO2 Pore-Filling.

Even though the solid polymer electrolyte has many intrinsic advantages over the liquid electrolyte, its ionic conductivity and mesopore-filling are much poorer than those of the liquid electrolyte, limiting its practical application to electrochemical devices such as dye-sensitized solar cells (DSCs). Two major shortcomings associated with utilizing solid polymer electrolytes in DSCs are first discussed, low ionic conductivity and poor pore-filling in mesoporous photoanodes for DSCs. In addition, future directions for the successful utilization of solid polymer electrolytes toward improving the performance of DSCs are proposed.

Synergistic metal-metal oxide nanoparticles supported electrocatalytic graphene for improved photoelectrochemical glucose oxidation.

We report the fabrication of graphene-WO3-Au hybrid membranes and evaluate their photocatalytic activity towards glucose oxidase mediated enzymatic glucose oxidation. The dual-functionality of gold nanoparticles in the reinforcement of visible light activity of graphene-WO3 membranes and improving the catalytic activity of immobilized enzymes for unique photoelectrochemical sensing application is demonstrated. This work provides new insights into the fabrication of light-sensitive hybrid materials and facilitates their application in future.

Tetrathiafulvalene as an electron acceptor for positive charge induction on the surface of silver nanoparticles for facilitated olefin transport.

Tetrathiafulvalene (TTF), a well-known electron donor, can also behave as an electron acceptor after being adsorbed on the surface of silver nanoparticles (Ag NPs), thereby inducing a partial positive charge on the Ag NPs surface. The Ag NPs activated by TTF help propylene transport much faster than propane, i.e.

Poly(vinylpyrrolidone)/KF electrolyte membranes for facilitated CO(2) transport.

In this study, we show for the first time that potassium fluoride (KF) can be utilized as a carrier for facilitated CO2 transport. A polymer electrolyte membrane was prepared by incorporating KF through coordinate covalent bonding with the amide groups of poly(vinylpyrrolidone) (PVP). The resulting PVP/KF electrolyte membrane showed enhanced CO2 separation performance compared with neat PVP.

Efficient light harvesting with micropatterned 3D pyramidal photoanodes in dye-sensitized solar cells.

3D TiO2 photoanodes in dye-sensitized solar cells (DSCs) are fabricated by the soft lithographic technique for efficient light trapping. An extended strategy to the construction of randomized pyramid structure is developed by the conventional wet-etching of a silicon wafer for low-cost fabrication. Moreover, the futher enhancement of light absorption resulting in photocurrent increase is achieved by combining the 3D photoanode with a conventional scattering layer.

Three dimensional-TiO(2) nanotube array photoanode architectures assembled on a thin hollow nanofibrous backbone and their performance in quantum dot-sensitized solar cells.

Facile synthesis of TiO2 nanotube branched (length ∼0.5 μm) thin hollow-nanofibers is reported. The hierarchical three dimensional photoanodes (H-TiO2-NFs) (only ∼1 μm thick) demonstrate their excellent candidature as photoanodes in QD-sensitized solar cells, exhibiting ∼3-fold higher energy conversion efficiency (η = 2.

Nanocomposite coatings on biomedical grade stainless steel for improved corrosion resistance and biocompatibility.

The 316 L stainless steel is one of the most commonly available commercial implant materials with a few limitations in its ease of biocompatibility and long-standing performance. Hence, porous TiO(2)/ZrO(2) nanocomposite coated over 316 L stainless steels was studied for their enhanced performance in terms of its biocompatibility and corrosion resistance, following a sol-gel process via dip-coating technique. The surface composition and porosity texture was studied to be uniform on the substrate.