Quantitative in situ TEM tensile testing of an individual nickel nanowire.

In this paper, we have demonstrated the usage of a novel micro-mechanical device (MMD) to perform quantitative in situ tensile tests on individual metallic nanowires inside a transmission electron microscope (TEM). Our preliminary experiment on a 360 nm diameter nickel nanowire showed that the sample fractured at an engineering stress of ∼ 1.2 GPa and an engineering strain of ∼ 4%, which is consistent with earlier experiments performed inside a scanning electron microscope (SEM).

Interface toughness of carbon nanotube reinforced epoxy composites.

Traditional single-fiber pull-out type experiments were conducted on individual multiwalled carbon nanotubes (MWNT) embedded in an epoxy matrix using a novel technique. Remarkably, the results are qualitatively consistent with the predictions of continuum fracture mechanics models. Unstable interface crack propagation occurred at short MWNT embedments, which essentially exhibited a linear load-displacement response prior to peak load.

Effect of nitrogen doping on the mechanical properties of carbon nanotubes.

We report on the usage of a simple microfabricated device that works in conjunction with a quantitative Nanoindenter within a scanning electron microscope (SEM) chamber, for the in situ quantitative tensile testing of individual catalytically grown pristine and nitrogen-doped multiwall carbon nanotubes (MWNTs). The two types of MWNTs were found to possess similar strengths but different load-bearing abilities owing to the differences in their wall structures. Also, stress versus strain curves and fracture surfaces showed that while the pristine MWNTs deform and fail in a brittle fashion, the nitrogen-doped MWNTs deform plastically to varying degrees prior to failure.