Carbon-silica mesoporous composite in situ prepared from coal gasification fine slag by acid leaching method and its application in nitrate removing.

Coal gasification fine slag (CGFS) was produced in the coal gasification process which was classified as an industrial solid waste. It was featured with naturally formed amorphous structures and an abundance of silicon, carbon and metal oxides. In this study, on the basis of the composition and structure characteristics of CGFS, a simple hydrochloric acid (HCl) leaching technology was applied to in situ prepare carbon-silica mesoporous composites (CSMCs) from CGFS by fully considering the value of the residual carbon.

Surface functional groups of carbon-based adsorbents and their roles in the removal of heavy metals from aqueous solutions: A critical review.

Carbon-based adsorbents such as graphene and its derivatives, carbon nanotubes, activated carbon, and biochar are often used to remove heavy metals from aqueous solutions. One of the important aspects of effective carbon adsorbents for heavy metals is their tunable surface functional groups. To promote the applications of functionalized carbon adsorbents in heavy metal removal, a systematic documentation of their syntheses and interactions with metals in aqueous solution is crucial.

Using chemical experiments and plant uptake to prove the feasibility and stability of coal gasification fine slag as silicon fertilizer.

Coal gasification fine slag (CGFS) is a kind of industrial waste that is generated from entrained-flow coal gasification with a high content of 0.5 M hydrochloric acid (HCl)-extractable silicon (Si). Si fertilizer has been widely used in agriculture to enhance the mechanical properties and yield of crops.

Opal promotes hydrothermal carbonization of hydroxypropyl methyl cellulose and formation of carbon nanospheres.

Hydrothermal carbon nanospheres were prepared by introducing opal into the hydrothermal carbonization system of hydroxypropyl methyl cellulose (HPMC). Then the effects of opal on hydrothermal carbonization of HPMC were investigated after different reaction durations (105-240 min). The reaction products were characterized by elemental analysis, gas chromatography-mass spectrometry (GC-MS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR) and N adsorption-desorption.

Transformation of Rusty Stainless-Steel Meshes into Stable, Low-Cost, and Binder-Free Cathodes for High-Performance Potassium-Ion Batteries.

To recycle rusty stainless-steel meshes (RSSM) and meet the urgent requirement of developing high-performance cathodes for potassium-ion batteries (KIB), we demonstrate a new strategy to fabricate flexible binder-free KIB electrodes via transformation of the corrosion layer of RSSM into compact stack-layers of Prussian blue (PB) nanocubes (PB@SSM). When further coated with reduced graphite oxide (RGO) to enhance electric conductivity and structural stability, the low-cost, stable, and binder-free RGO@PB@SSM cathode exhibits excellent electrochemical performances for KIB, including high capacity (96.8 mAh g ), high discharge voltage (3.

Flexible and Foldable Li-O2 Battery Based on Paper-Ink Cathode.

A flexible freestanding air cathode inspired by traditional Chinese calligraphy art is built. When this novel electrode is employed as both a new concept cathode and current collector, to replace conventional rigid and bulky counterparts, a highly flexible and foldable Li-O2 battery with excellent mechanical strength and superior electrochemical performance is obtained.

Artificial Protection Film on Lithium Metal Anode toward Long-Cycle-Life Lithium-Oxygen Batteries.

An artificial while very stable solid electrolyte interphase film is formed on lithium metal using an electrochemical strategy. When this protected Li anode is first used in a Li-O2 battery, the film formed on the anode can effectively suppress the parasitic reactions on the Li anode/electrolyte interface and significantly enhance the cycling stability of the Li-O2 battery.

Photocatalytic degradation of an azo dye using N-doped NaTaO3 synthesized by one-step hydrothermal process.

N-doped NaTaO(3) compounds (NaTaO(3-)(x)N(x)) with nano-cubic morphology were successfully synthesized by one-step hydrothermal method and Methyl Orange (MO) was used as a model dye to evaluate their photocatalytic efficiency under visible-light irradiation. The as-prepared NaTaO(3-)(x)N(x) samples were characterized by various techniques, such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-vis diffuse reflectance spectra and GC-MS. The results indicate that NaTaO(3-)(x)N(x) displays a pure perovskite structure when the synthesis temperature is higher than 180°C.

Synthesis and photocatalytic activity of N-doped NaTaO3 compounds calcined at low temperature.

N-doped NaTaO(3) compounds (NaTaO(3-x)N(x)) were successfully synthesized using NaTaO(3) prepared at low calcination temperature as starting material and melamine (C(3)H(6)N(6)) as nitrogen source. The as-prepared NaTaO(3-x)N(x) samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and UV-vis diffuse reflectance spectra. The XRD results indicate that the crystallization temperature of NaTaO(3) is up to 700 degrees C and the doping of N does not lead to significant structural changes.

A high-stability silica-clay composite: synthesis, characterization and combination with TiO2 as a novel photocatalyst for Azo dye.

A novel micro-mesopores composite material has successfully been synthesized at basic hydrothermal conditions using natural mineral montmorillonite (MMT) and tetraethoxysilane (TEOS). Two surfactants, cetyltrimethyl ammonium bromide (CTAB) and polyethylene glycol (PEG), have been employed in order to shape the pores in the composite. The resultant silica-clay has large surface area (472m(2)/g) and high hydrothermal stability, which makes it a potentially host-material for catalyst.

Photodegradation of an azo dye using immobilized nanoparticles of TiO2 supported by natural porous mineral.

Natural mordenite, replacing the synthetic zeolites, has been employed as the support of TiO2, and its photocatalytic activity has been examined in methyl orange (MO) aqueous under UV light. AFM, TEM, XRD, FTIR and fluorescence spectra have been used to reveal the loading effects of TiO2 on mordenite. The results show that the photocatalytic degradation (PCD) reaction rates are sharply increased by natural zeolite supports.

[Experimental research on the effect of nanophase ceramics on osteoblasts functions].

In order to study the cytocompatibility of nanophase hydroxyapatite ceramic in vitro, we prepared hydroxyapatite by use of the wet chemistry techniques. The grain size of hydroxyapatite of interest to the present study was determined by scanning electron microscopy and atomic force microscopy with image analysis software. Primary culture of osteoblast from rat calvaria was established.

[Cytocompatibility of nanophase hydroxyapatite ceramics].

Objective: To evaluate the cytocompatibility of nanophase hydroxyapatite ceramics in vitro.

Methods: Hydroxyapatite (HA) was prepared via wet method. The grain size of the hydroxyapatite in the study was determined by scanning electron microscope and atomic force microscope with image analysis software.

[Photocatalysis characterization of titanium dioxide supported on natural clinoplilolite].

This paper studied preparing photocatalyst supported on natural clinoplilolite, photocatalysis degrading to methyl orange solution as photocatalysis function test, solar as light resource, explored the synthesize condition and affect factors of its catalysis activity. The capability of catalyst was evaluated by decolor rate and COD removal rate. The samples was described by XRD, IR and specific surface area.