Zwitterionic nanoparticles from indocyanine green dimerization for imaging-guided cancer phototherapy.

Indocyanine green (ICG), the only near-infrared (NIR) dye approved for clinical use, has received increasing attention as a theranostic agent wherein diagnosis (fluorescence) is combined with therapy (phototherapy), but suffers rapid hepatic clearance, poor photostability, and limited accumulation at tumor sites. Here we report that dimerized ICG can self-assemble to form zwitterionic nanoparticles (ZN-dICG), which generate fluorescence self-quenching but exhibit superior photothermal and photodynamic properties over ICG. The zwitterionic moieties confer ZN-dICG an ultralow critical micelle concentration and high colloidal stability with low non-specific binding in vivo.

Simulation-guided development of advanced PID control algorithm for skin cooling in radiofrequency lipolysis.

Background: The clinical outcomes of bipolar radiofrequency (RF) lipolysis, a prevalent non-invasive fat reduction procedure, hinge on the delicate balance between effective lipolysis and patient safety, with skin overheating and subsequent tissue damage as primary concerns.

Objective: This study aimed to investigate a novel bipolar radiofrequency lipolysis technique, safeguarding the skin through an innovative PID temperature control algorithm.

Methods: Utilizing COMSOL Multiphysics simulation software, a two-dimensional fat and skin tissue model was established, simulating various PID temperature control schemes.

Cationized orthogonal triad as a photosensitizer with enhanced synergistic antimicrobial activity.

Single-molecule-based synergistic phototherapy holds great potential for antimicrobial treatment. Herein, we report an orthogonal molecular cationization strategy to improve the reactive oxygen species (ROS) and hyperthermia generation of heptamethine cyanine (Cy7) for photodynamic and photothermal treatments of bacterial infections. Cationic pyridine (Py) is introduced at the meso‑position of the asymmetric Cy7 with intramolecular charge transfer (ICT) to construct an atypical electron-transfer triad, which reduces ΔE, circumvents rapid charge recombination, and simultaneously enhances intersystem crossing (ISC) based on spin-orbit charge-transfer ISC (SOCT-ISC) mechanism.

Supramolecular prodrug-like nanotheranostics with dynamic and activatable nature for synergistic photothermal immunotherapy of metastatic cancer.

Synergistic photothermal immunotherapy has attracted widespread attention due to the mutually reinforcing therapeutic effects on primary and metastatic tumors. However, the lack of clinical approval nanomedicines for spatial, temporal, and dosage control of drug co-administration underscores the challenges facing this field. Here, a photothermal agent (Cy7-TCF) and an immune checkpoint blocker (NLG919) are conjugated via disulfide bond to construct a tumor-specific small molecule prodrug (Cy7-TCF-SS-NLG), which self-assembles into prodrug-like nano-assemblies (PNAs) that are self-delivering and self-formulating.

Noninvasive Diagnostic Technique for Nonalcoholic Fatty Liver Disease Based on Features of Tongue Images.

Objective: To investigate a new noninvasive diagnostic model for nonalcoholic fatty liver disease (NAFLD) based on features of tongue images.

Methods: Healthy controls and volunteers confirmed to have NAFLD by liver ultrasound were recruited from China-Japan Friendship Hospital between September 2018 and May 2019, then the anthropometric indexes and sampled tongue images were measured. The tongue images were labeled by features, based on a brief protocol, without knowing any other clinical data, after a series of corrections and data cleaning.

Cell-Membrane Coated Self-Immolative Poly(thiourethane) for Cysteine/Homocysteine-Triggered Intracellular HS Delivery.

Hydrogen sulfide (HS) is an important gaseous signaling molecule with unique pleiotropic pharmacological effects, but may be limited for clinical translation due to the lack of a reliable delivery form that delivers exogenous HS to cells at action site with precisely controlled dosage. Herein, we report the design of a poly(thiourethane) (PTU) self-immolative polymer terminally caged with an acrylate moiety to trigger release of HS in response to cysteine (Cys) and homocysteine (Hcy), the most used and independent indicators of neurodegenerative diseases. The synthesized PTU polymer was then coated with the red-blood-cell (RBC) membrane in the presence of solubilizing agent to self-assemble into nanoparticles with enhanced stability and cytocompatibility.

Near-Infrared Molecular Logic Gate for Construction and Quantification of Cell-Macromolecule Conjugates.

Engineering cell surfaces with macromolecules offers the potential to manipulate and control their phenotype and function for cell-based therapies. construction and real-time evaluation of cell-macromolecule conjugates are vital for characterizing their dynamics, mobility, and function but remain a great challenge. Herein, we design a near-infrared (NIR) heptamethine cyanine (LS)-bearing dibenzocyclooctyne (DBCO) and norbornene (NB) in its structure for rapid and selective bioorthogonal "click" coupling to azide-labeled cells and tetrazine-functionalized macromolecular precursors.

Programmable multistage small-molecule nano-photosensitizer for multimodal imaging-guided photothermal therapy.

Photothermal therapy has become a promising approach as precision medicine to allow spatial control of therapeutic effect only in the site of interest. However, the full potential of PTT has not been realized due to the lack of simple photosensitizers (PSs) that can overcome multistage biological barriers and improve theranostic efficiency. Here, we develop a small molecule-based PS to enhance tumor-specific PTT by programming multistage transport and activation properties in molecular architecture.

Clinical value of video-assisted single-lumen endotracheal intubation and application of artificial intelligence in it.

Visualization techniques and artificial intelligence (AI) are currently used for intubation device. By providing airway visualization during tracheal intubation, the technologies provide safe and accurate access to the trachea. The ability of AI to automatically identify airways from images of intubation device makes it attractive for use in intubation devices.

[Material design and temperature field simulation analysis of tumor radiofrequency ablation needle].

To solve the problems of small one-time ablation range and easy charring of the tissue around the electrode associated with the tumor radiofrequency ablation needle, based on the multiphysical field coupling analysis software COMSOL, the effects of needle material, the number of sub needles and the bending angle of sub needles on the ablation effect of radiofrequency ablation electrode needle were studied. The results show that compared with titanium alloy and stainless steel, nickel titanium alloy has better radiofrequency energy transmission efficiency and it is the best material for electrode needle. The number of sub needles has a great influence on the average necrosis depth and the maximum necrosis diameter.

Lighting up Self-Quenching Nanoaggregates with Protein Corona for Simultaneous Intraoperative Imaging and Photothermal Theranostics of Metastatic Cancer.

Near-infrared (NIR) photothermal transduction agents (PTAs) with large rigid π-extended and planar structures are prone to aggregate in a physiological environment where their emission is often quenched due to the strong intermolecular dipole-dipole or π-π interactions. This aggregation-caused quenching effect greatly impedes their applications in image-guided photothermal theranostics. Herein, we made an interesting finding that engineering a bioinspired protein corona (PC), once thermodynamically stabilized in preferred orientations on PTA nanoaggregates, can produce brilliant NIR fluorescence with a high quantum yield (∼6.

Reducing thermal damage to adjacent normal tissue with dual thermo-responsive polymer via thermo-induced phase transition for precise photothermal theranosis.

Photothermal therapy has been extensively studied to improve the light-to-heat efficiency for tumor ablation, but could cause severe damage to adjacent healthy tissue due to the thermal transfer, the random distribution of photothermal agents (PTAs), or combination hereof. Herein, we solve this dilemma with a material design strategy to develop a P(AAm-co-AN)-b-P(NIPAM-co-DMAa)-b-P(AAm-co-AN) ABA triblock copolymer by RAFT polymerization, which exhibits both UCST and LCST dual thermo-responsive behaviors in aqueous solution. The P(AAm-co-AN) block with appropriate AN content allows to finely tune its UCST to ∼ 43°C, which can effectively co-assemble with camptothecin (CPT) and Cy7-TCF, a near-infrared (NIR) PTA, realizing the photo-activated "on-demand" release of CPT and Cy7-TCF.

Using Platelet-Rich Plasma Hydrogel to Deliver Mesenchymal Stem Cells into Three-Dimensional PLGA Scaffold for Cartilage Tissue Engineering.

The synthetic biodegradable polyester-based rigid porous scaffolds and cell-laden hydrogels have been separately employed as therapeutic modality for cartilage repair. However, the synthetic rigid scaffolds alone may be limited due to the inherent lack of bioactivity for cartilage regeneration, while the hydrogels have insufficient mechanical properties that are not ideal for load-bearing cartilage applications. In the present study, a hybrid construct was designed to merge the advantage of 3D-printed rigid poly(lactic-co-glycolic acid) (PLGA) scaffolds with cell-laden platelet-rich plasma (PRP) hydrogels that can release growth factors to regulate the tissue healing process.

A Simple Small Molecule with Synergistic Passive and Active Dual-Targeting Effects for Imaging-Guided Photothermal Cancer Therapy.

Photothermal therapy allows spatiotemporal control of the treatment effect only at the site of the disease and provides promising opportunities for imaging-guided precision therapy. However, the development of photothermal transduction agents (PTAs) for tumor-specific accumulation and precision imaging, avoiding toxicity to the surrounding healthy tissue, is still challenging. Herein, a cyclooxygenase-2-specific small-organic-molecule-based PTA (Cy7-TCF-IMC) is developed, which can self-assemble into nanosaucers having unique photothermal and photoacoustic properties.

Robust Electrospun Nanofibers from Chemosynthetic Poly(4-hydroxybutyrate) as Artificial Dural Substitute.

Bioresorbable poly(4-hydroxybutyrate) (P4HB) may fulfill the specific requirements that are necessary for a dural substitute, including its high elasticity, long-term strength retention properties, and the biocompatibility without significant accumulation of acidic degradation products. However, commercial P4HB can only be produced by the bacterial fermentation, which limits its applications in the cerebrospinal system due to higher endotoxin restriction. Meanwhile, P4HB can be prepared via the ring-opening polymerization of γ-butyrolactone.

Esterase-Responsive Polypeptide Vesicles as Fast-Response and Sustained-Release Nanocompartments for Fibroblast-Exempt Drug Delivery.

Enzyme-responsive polypeptide vesicles have attracted considerable attention for precision theranostics because of their biocompatibility, biodegradability, and unique secondary conformation transition triggered by the catalytic actions of enzymes. These promising potentials of polypeptide vesicles could be limited in a drug delivery system by the very slow enzyme diffusion rate into vesicles that could reduce the efficacy of the drug. On the other hand, stimuli-responsive polymeric vesicles that respond to stimuli can undergo microstructure destruction for the burst release of drugs, which would penetrate through the membrane of dead cells and the tumor extracellular matrix, inducing acute toxicity to neighboring cells.

Intriguing H-Aggregates of Heptamethine Cyanine for Imaging-Guided Photothermal Cancer Therapy.

Organic small-molecule-based photothermal agents such as cyanine dyes have received increasing attention in developing novel cancer therapies with potential clinical utility but suffer from poor stability, low photothermal efficiency, and limited accumulation at tumor sites in molecular forms. Self-assembly of small-molecule dyes into supramolecular assemblies may address these concerns by controlling the molecular organization of dye monomers to form structures of a higher order. Among them, H-aggregates of dyes favor face-to-face contacts with strongly overlapping areas, which always have a negative connotation to exhibit low or no fluorescence in most cases but may emanate energy in nonradiative forms such as heat for photothermal cancer therapy applications.

Supramolecular Nanodiscs Self-Assembled from Non-Ionic Heptamethine Cyanine for Imaging-Guided Cancer Photothermal Therapy.

Supramolecular nanomedicines, which use supramolecular design to improve the precision and effectiveness of pharmaceutical practice and optimize pharmacokinetic profiles, have gathered momentum to battle cancer and other incurable diseases, for which traditional small-molecular and macromolecular drugs are less effective. However, the lack of clinical approval of supramolecular assembly-based medicine underscores the challenges facing this field. A 2D nanodisc-based supramolecular structure is formed by a non-ionic heptamethine cyanine (Cy7) dye, which generates fluorescence self-quenching but unique photothermal and photoacoustic properties.

Engineering a "PEG-g-PEI/DNA nanoparticle-in- PLGA microsphere" hybrid controlled release system to enhance immunogenicity of DNA vaccine.

Controlled release strategies of DNA vaccine hold promise for the design of in vivo vaccination platforms, yet the formulation and sustained delivery still pose a substantial challenge. In this study, we developed a novel hybrid dual-particulate delivery system, nanoparticle-in-microsphere (NIM), to integrate the advantages of nano-sized polymer/DNA polyplex with the sustained-release microsphere for DNA vaccine delivery. The nano-sized cores, consisting of polyethylene glycol-graft-polyethylenimine (PEG-g-PEI)/DNA polyplexes, were formulated into PLGA microspheres using a solid-in-oil-in-water (S/O/W) emulsion.

Tailor-Engineered POSS-Based Hybrid Gels for Bone Regeneration.

Organic-inorganic oligo(ethylene glycol)-polyhedral oligomeric silsesquioxanes (OEG-POSS) hybrid materials are woven into macroscopically shaped entities by thiol-ene chemistry. The mechanical behavior and interfacial nature of the OEG-POSS materials are easily tailored by changing the length of OEG. The nanostructured OEG-POSS materials exhibited excellent bioactivity to form hydroxyapatite, whose morphology was also dependent on the molecular weight of OEG.

pH-Induced antireflection coatings derived from hydrogen-bonding-directed multilayer films.

Hydrogen-bonding-directed layer-by-layer assembled films, based on polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles and poly(4-vinylpyridine) (P4VP), were successfully fabricated in methanol. Varying the PAA content in the PS-b-PAA micelles afforded control over the film growth properties, especially the multilayer film thickness. Interestingly, antireflection films with refractive indices that could be tuned between 1.

Cell adhesion properties of patterned poly(acrylic acid)/poly(allylamine hydrochloride) multilayer films created by room-temperature imprinting technique.

Patterned poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) multilayer films with line structures of different lateral size and vertical height were fabricated by a room-temperature imprinting technique, and their cell adhesion properties were investigated. The nonimprinted PAA/PAH multilayer films are cytophilic toward NIH/3T3 fibroblasts and HeLa cells whether PAA or PAH is the outer most layer. In contrast, the PAA/PAH multilayer films with a 6.

Room-temperature imprinting poly(acrylic acid)/poly(allylamine hydrochloride) multilayer films by using polymer molds.

Layer-by-layer assembled polyelectrolyte multilayer films of poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) have been successfully patterned by room-temperature imprinting using a Norland Optical Adhesives (NOA 63) polymer mold. The proper amount of water in the PAA/PAH multilayer film can decrease the viscosity of the film and facilitate the imprinting. Many factors, such as imprinting pressure, length of imprinting time, and the structure and size of the patterns in the polymer mold, can produce an influence on the final imprinted pattern structures on multilayer films.

Selective dissolution of the silver component in colloidal Au and Ag multilayers: a facile way to prepare nanoporous gold film materials.

Colloidal Au/Ag multilayer films were prepared by alternate assembly of Au nanoparticles with a size of 5 +/- 1.2 nm and Ag nanoparticles with a size of 10 +/- 2.4 nm by using 1,5-pentanedithiol as cross-linker.

Site-selective lateral multilayer assembly of bienzyme with polyelectrolyte on ITO electrode based on electric field-induced directly layer-by-layer deposition.

We describe here a new approach to construct a multilayer enzyme/polyelectrolyte film on a structured transparent indium-tin oxide (ITO) covered glass electrode surface as micropattern, on which two different types of enzyme distributed laterally on one common substrate without interference. The multilayer film was prepared by alternate electric field directed layer-by-layer assembly deposition and alternate deposition of different redox enzymes and polyelectrolyte poly(diallyldimethylammonium chloride) (PDDA) onto the site-selective ITO glass electrode surface. The cyclic voltammogram, obtained from the ITO glass electrode modified with the glucose oxidase (GO(X))/PDDA and catalase (CA(T))/PDDA multilayers, revealed that the bioelectrocatalytic response is directly correlated to the number of deposition bilayers.