Mechanical Properties, Microstructure, Degradation Behavior, and Biocompatibility of Zn-0.5Ti-0.5Fe and Zn-0.5Ti-0.5Mg Guided Bone Regeneration Barrier Membranes Prepared Using a Powder Metallurgy Method.

Pure zinc exhibits low mechanical properties, making it unsuitable for use in guided bone regeneration (GBR) membranes. The present study focused on the preparation of Zn alloy GBR films using powder metallurgy, resulting in Zn-0.5Ti-0.

The diagnostic value of neutrophil to lymphocyte ratio, albumin to fibrinogen ratio, and lymphocyte to monocyte ratio in Parkinson's disease: a retrospective study.

Background: Parkinson's disease (PD) is a prevalent disorder of the central nervous system, marked by the degeneration of dopamine (DA) neurons in the ventral midbrain. In the pathogenesis of PD, inflammation hypothesis has been concerned. This study aims to investigate clinical indicators of peripheral inflammation in PD patients and to explore the diagnostic value of neutrophil-to-lymphocyte ratio (NLR), albumin-to-fibrinogen ratio (AFR), and lymphocyte-to-monocyte ratio (LMR) in assessing PD risk.

Association between vitamin B1 intake and hyperuricemia in adults.

Studies investigating the relationship between dietary vitamin B1 intake and risk of Hyperuricemia (HU) are scarce, the present study aimed to examine the association of dietary vitamin B1 intake and HU among adults. This cross-sectional study included 5750 adults whose data derived from National Health and Nutrition Examination Survey (NHANES) from March 2017 to March 2020. The dietary intake of vitamin B1 was assessed using 24-h dietary recall interviews.

A biodegradable Zn-5Gd alloy with biomechanical compatibility, cytocompatibility, antibacterial ability, and in vitro and in vivo osteogenesis for orthopedic applications.

Zinc (Zn) and some of its alloys are recognized as promising biodegradable implant materials due to their acceptable biocompatibility, facile processability, and moderate degradation rate. Nevertheless, the limited mechanical properties and stability of as-cast Zn alloys hinder their clinical application. In this work, hot-rolled (HR) and hot-extruded (HE) Zn-5 wt.

Phase Field Study on the Spinodal Decomposition of β Phase in Zr-Nb-Ti Alloys.

In this study, a phase field method based on the Cahn-Hilliard equation was used to simulate the spinodal decomposition in Zr-Nb-Ti alloys, and the effects of Ti concentration and aging temperature (800-925 K) on the spinodal structure of the alloys for 1000 min were investigated. It was found that the spinodal decomposition occurred in the Zr-40Nb-20Ti, Zr-40Nb-25Ti and Zr-33Nb-29Ti alloys aged at 900 K with the formation of the Ti-rich phases and Ti-poor phases. The spinodal phases in the Zr-40Nb-20Ti, Zr-40Nb-25Ti and Zr-33Nb-29Ti alloys aged at 900 K were in an interconnected non-oriented maze-like shape, a discrete droplet-like shape and a clustering sheet-like shape in the early aging period, respectively.

Selective Laser Melted Magnesium Alloys: Fabrication, Microstructure and Property.

As the lightest metal structural material, magnesium and its alloys have the characteristics of low density, high specific strength and good biocompatibility, which gives magnesium alloys broad application prospects in fields of biomedicine, transportation, and aerospace. Laser selective melting technology has the advantages of manufacturing complex structural parts, high precision and high degree of freedom. However, due to some disadvantages of magnesium alloy, such as low boiling point and high vapor pressure, the application of it in laser selective melting was relatively undeveloped compared with other alloys.

Orientation Control for Nickel-Based Single Crystal Superalloys: Grain Selection Method Assisted by Directional Columnar Grains.

The service performance of single crystal blades depends on the crystal orientation. A grain selection method assisted by directional columnar grains is studied to control the crystal orientation of Ni-based single crystal superalloys. The samples were produced by the Bridgman technique at withdrawal rates of 100 μm/s.

Effect of Rolling Treatment on Microstructure, Mechanical Properties, and Corrosion Properties of WE43 Alloy.

Magnesium alloys show broad application prospects as biodegradable implanting materials due to their good biocompatibility, mechanical compatibility, and degradability. However, the influence mechanism of microstructure evolution during forming on the mechanical properties and corrosion resistance of the magnesium alloy process is not clear. Here, the effects of rolling deformation, such as cold rolling, warm rolling, and hot rolling, on the microstructure, mechanical properties, and corrosion resistance of the WE43 magnesium alloy were systematically studied.

In vitro and in vivo assessment of the effect of biodegradable magnesium alloys on osteogenesis.

Magnesium (Mg) and some of its alloys are considered promising biodegradable metallic biomaterials for bone implant applications. The osteogenesis effect of Mg alloys is widely reported; however, the underlying mechanisms are still not clear. In this study, pure Mg, Mg-3Zn, and Mg-2Zn-1Mn were prepared, and their degradation behavior, biocompatibility, and osteogenesis effect were systematically assessed both in vitro and in vivo.

Comparative analysis of the microbial community and nutritional quality of sufu.

Sufu is a type of fermented food with abundant nutrients and delicious taste. It is made from the fermentation of tofu by various microorganisms. In this study, three types of sufu were prepared through natural fermentation: (NF), single-strain fermentation (SF), and mixed-strain fermentation (MF).

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti-24Nb-38Zr-2Mo alloy for orthopedic applications.

β-type titanium (Ti) alloys have been extensively investigated as orthopedic implant materials due to their unique combination of low elastic modulus, high specific strength, corrosion resistance, and biocompatibility. In this study the mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of β-type Ti-24Nb-38Zr-2Mo (TNZM) and Ti-24Nb-38Zr-2Mo-0.1Sc (TNZMS) have been comparatively investigated for orthopedic applications.

Mg(OH) nanoparticles enhance the antibacterial activities of macrophages by activating the reactive oxygen species.

Infection often causes disastrous consequences in all fields of clinical medicine, especially orthopedics. Hence, critical efforts are being made to engineer novel nanomaterials for the treatment of orthopedic infections due to the high biocompatibility and antibacterial properties they possess. The purpose of this study was to investigate the antibacterial effects of magnesium hydroxide (Mg(OH) ) nanoparticles (NPs) in vitro and determine their possible mechanisms of action.

Development of biodegradable Zn-1Mg-0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications.

Zinc (Zn) and its alloys are receiving great attention as promising biodegradable materials due to their suitable corrosion resistance, good biocompatibility, and highly desirable biofunctionality. Nevertheless, the low mechanical strength of pure Zn impedes its practical clinical application and there have been calls for further research into the Zn alloys and thermomechanical processes to enhance their mechanical properties and biocompatibility. Here, we report on the alloying efficacy of rare earth elements (REEs) including erbium (Er), dysprosium (Dy), and holmium (Ho) on the microstructure, mechanical properties, corrosion and wear behavior, and in vitro biological properties of Zn-1Mg-0.

Microstructure, mechanical properties, degradation behavior, and biocompatibility of porous Fe-Mn alloys fabricated by sponge impregnation and sintering techniques.

In this study, porous iron (Fe)-manganese (Mn) alloys with high porosity were successfully prepared by sponge impregnation and sintering (SIS). The compositions of the porous Fe-Mn alloys were strongly dependent on the sintering temperature, and the Mn content was ~44, 30, and 12 wt.% for alloys sintered at 1100, 1150, and 1200 °C, respectively.

LOC103691336/miR-138-5p/BMPR2 axis modulates Mg-mediated osteogenic differentiation in rat femoral fracture model and rat primary bone marrow stromal cells.

Intramedullary stabilization is frequently used to treat long bone fractures. Since implant removal can become technically very challenging with the potential to cause further tissue damage, biodegradable materials are emerging as alternative options. Magnesium (Mg)-based biodegradable implants have a controllable degradation rate and good tissue compatibility, which makes them attractive for musculoskeletal research.

Mg-Zn-Mn alloy extract induces the angiogenesis of human umbilical vein endothelial cells via FGF/FGFR signaling pathway.

Magnesium (Mg) and its alloys as a type of different biodegradable materials have been used in the musculoskeletal field because of their excellent biocompatibility, biodegradability and mechanical properties similar to bone; besides, Mg could promote osteoblast differentiation in vitro and induce the formation of new bone in vivo. In the present study, we prepared the extracts of Mg-Zn-Mn alloy and examined their effects on the angiogenesis of human umbilical vein endothelial cells (HUVECs). In the present study, we prepared Mg-Zn-Mn alloy extracts of different concentrations and cultured HUVECs with these extracts.

Investigation on the microstructure, mechanical properties, in vitro degradation behavior and biocompatibility of newly developed Zn-0.8%Li-(Mg, Ag) alloys for guided bone regeneration.

In order to develop a biodegradable guided bone regeneration membrane with the required mechanical properties and high corrosion resistance, Zn-0.8%Li(wt), Zn-0.8%Li-0.

Evaluation of the mechanisms and effects of Mg-Ag-Y alloy on the tumor growth and metastasis of the MG63 osteosarcoma cell line.

Osteosarcoma is a malignant primary bone tumor, which often associates with pulmonary metastasis. The radical surgery of osteosarcoma often requires internal orthopedic implants. Therefore, implants with antitumor properties should be developed.

In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant.

Magnesium (Mg) alloy is gaining more interest because of its degradability and osteogenic potential. Still, it has some deficiencies, such as its rapid degradation rate, insufficient mechanical property. This research aimed to design a novel biodegradable Mg-argentum (Ag)-yttrium (Y) alloy, and Y was added to improve degradable and mechanical property.

Improvement of the mechanical properties and corrosion resistance of biodegradable β-Ca(PO)/Mg-Zn composites prepared by powder metallurgy: the adding β-Ca(PO) hot extrusion and aging treatment.

In this study, 10%β-Ca(PO)/Mg-6%Zn (wt.%) composites with Mg-6%Zn alloy as control were prepared by powder metallurgy. After hot extrusion, the as-extruded composites were aged for 72h at 150°C.

Biodegradation performance of a chitosan coated magnesium-zinc-tricalcium phosphate composite as an implant.

A Mg-Zn-tricalcium phosphate composite with a chitosan coating was prepared in this investigation to study its biodegradation performance both in vitro and in vivo conditions. The in vitro test results show that the immersion corrosion rate, the pH values of the simulated body fluids and the released metal ion concentration of the chitosan coated composite are all lower than those of the uncoated composite. The in vitro cytotoxicity test shows that the chitosan coated specimens is safe for cellular applications.