An Ultra-Miniaturized Fiber Humidity Sensor Based on Near-Parallel Ion Pathways Induced Efficient Water-Electricity Conversion.

Humidity sensors are vital for ambient monitoring, but existing sensors focus on moisture absorption, overlooking the indispensable role of ion channels in the water-electricity conversion process. Here, an ultra-miniaturized fiber humidity (MFH) sensor based on near-parallel ion pathways is presented. The well-designed nanochannels significantly facilitate ion transport due to the stable charge distribution and the confined ions migration within near-parallel nanostructure, which improves the water-electricity conversion efficiency of moisture-sensitive fibers.

Evaluation of the correlation of wall elasticity between different sections of radial artery by velocity vector imaging.

Aim: This study aimed to evaluate the correlation between the elasticity of the anterior and posterior walls of the radial artery in different sections using velocity vector imaging.

Material And Methods: In this retrospective analysis, 30 healthy people who underwent physical examination in our hospital from January 2022 to January 2023 were analyzed offline by velocity vector imaging technology. The following parameters were assessed: peak systolic strain (Ss; %), peak diastolic strain (Sd; %), peak systolic strain rate (SRs; 1/s), and peak diastolic strain rate (SRd; 1/s).

Progress and Prospect of Bimetallic Oxides for Sodium-Ion Batteries: Synthesis, Mechanism, and Optimization Strategy.

Sodium-ion batteries (SIBs) are considered as an alternative to and even replacement of lithium-ion batteries in the near future in order to address the energy crisis and scarcity of lithium resources due to the wide distribution and abundance of sodium resources on the earth. The exploration and development of high-performance anode materials are critical to the practical applications of advanced SIBs. Among various anode materials, bimetallic oxides (BMOs) have attracted special research attention because of their abundance, easy access, rich redox reactions, enhanced capacity and satisfactory cycling stability.

Layered Topological Insulator MnBiTe as a Cathode for a High Rate Performance Aqueous Zinc-Ion Battery.

Recently, the topological insulator MnBiTe has aroused great attention owing to its exotic quantum phenomena and intriguing device applications, but the superior performances of MnBiTe have not been researched in the field of electrochemistry. By theoretical calculations, it is found that MnBiTe exhibits excellent Zn storage and transport properties. Therefore, it is speculated that MnBiTe has excellent electrochemical performance in zinc-ion batteries (ZIBs).

SnO-Perovskite Interface Engineering Based on Bifacial Passivation via Multifunctional -(2-Acetamido)-2-aminoethanesulfonic Acid toward Efficient and Stable Solar Cells.

Bifacial passivation on both electron transport materials and perovskite light-absorbing layers as a straightforward technique is used for gaining efficient and stable perovskite solar cells (PSCs). To develop this strategy, organic molecules containing multiple functional groups can maximize the effect of defect suppression. Based on this, we introduce -(2-acetamido)-2-aminoethanesulfonic acid (ACES) at the interface between tin oxide (SnO) and perovskite.

Study of the growth mechanism of a self-assembled and ordered multi-dimensional heterojunction at atomic resolution.

Multi-dimensional heterojunction materials have attracted much attention due to their intriguing properties, such as high efficiency, wide band gap regulation, low dimensional limitation, versatility and scalability. To further improve the performance of materials, researchers have combined materials with various dimensions using a wide variety of techniques. However, research on growth mechanism of such composite materials is still lacking.

Pressure-Regulated Nanoconfined Channels for Highly Effective Mechanical-Electrical Conversion in Proton Battery-Type Self-Powered Pressure Sensor.

Battery-sensing-based all-in-one pressure sensors are generally successfully constructed by mimicking the information transfer of living organisms and the sensing behavior of human skin, possessing features such as low energy consumption and detection of low/high-frequency mechanical signals. To design high-performance all-in-one pressure sensors, a deeper understanding of the intrinsic mechanisms of such sensors is required. Here, a mechanical-electrical conversion mechanism based on pressure-modulated nanoconfined channels is proposed.

MXene-Integrated Perylene Anode with Ultra-Stable and Fast Ammonium-Ion Storage for Aqueous Micro Batteries.

The aqueous micro batteries (AMBs) are expected to be one of the most promising micro energy storage devices for its safe operation and cost-effectiveness. However, the performance of the AMBs is not satisfactory, which is attributed to strong interaction between metal ions and the electrode materials. Here, the first AMBs are developed with NH as charge carrier.

Micron-sized HMoO/PANI for superfast proton batteries in frozen electrolyte through Grotthuss mechanism.

Aqueous proton battery is considered as a promising candidate for the electrochemical energy storage system with the merits of safety, environmental benignity, fast kinetics and low cost. The realization of these advantages relies on the development of suitable and easy-access electrode materials. Herein, micron-sized HMoO/Polyaniline (PANI) is developed as a high-rate and stable anode material in proton battery.

Nylon Fabric/GO Based Self-Powered Humidity Sensor Based on the Galvanic Cell Principle with High Air Permeability and Rapid-Response.

Flexible humidity sensors have received more and more attention in people's lives, and the problems of gas permeability and power supply issues of the device have long been areas in need of improvement. In this work, inspired by the high air permeability of daily wear clothing and galvanic batteries, a self-powered humidity sensor with high air permeability and fast response is designed. A nylon fabric/GO net (as a humidity sensitive layer and solid electrolyte) is obtained by spraying technique.

Cobalt phosphide/nickel-cobalt phosphide heterostructured hollow nanoflowers for high-performance supercapacitor and overall water splitting.

In this work, a novel CoP/NiCoP heterostructure with hollow nanoflower morphology is designed and constructed. Benefiting from the hollow nanoflower morphology and tuned electronic structure, the heterostructured CoP/NiCoP hollow nanoflowers are demonstrated as both high-performance supercapacitor electrode materials and superior bifunctional electrocatalysts in overall water splitting. The CoP/NiCoP delivers a high capacitance of 1476.

Extraordinary Five-Wave Mixing in a Zinc Oxide Microwire on a Au Film.

Coherent multiwave mixing is in demand for optical frequency conversion, imaging, quantum information science, etc., but has rarely been demonstrated in solid-state systems. Here, we observed three- and five-wave mixing (5WM) in a -axis growth zinc oxide microwire on a Au film with picosecond pulses in the near-infrared region.

In Situ Transmission Electron Microscopy for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have attracted tremendous attentions in recent years due to the abundance and wide distribution of Na resource on the earth. However, SIBs still face the critical issues of low energy density and unsatisfactory cyclic stability at present. The enhancement of electrochemical performance of SIBs depends on comprehensive and precise understanding of the underlying sodium storage mechanism.

An Air-Rechargeable Zn Battery Enabled by Organic-Inorganic Hybrid Cathode.

Self-charging power systems collecting energy harvesting technology and batteries are attracting extensive attention. To solve the disadvantages of the traditional integrated system, such as highly dependent on energy supply and complex structure, an air-rechargeable Zn battery based on MoS/PANI cathode is reported. Benefited from the excellent conductivity desolvation shield of PANI, the MoS/PANI cathode exhibits ultra-high capacity (304.

Maximizing Electron Channels Enabled by MXene Aerogel for High-Performance Self-Healable Flexible Electronic Skin.

Among the increasingly popular miniature and flexible smart electronics, two-dimensional materials show great potential in the development of flexible electronics owing to their layered structures and outstanding electrical properties. MXenes have attracted much attention in flexible electronics owing to their excellent hydrophilicity and metallic conductivity. However, their limited interlayer spacing and tendency for self-stacking lead to limited changes in electron channels under external pressure, making it difficult to exploit their excellent surface metal conductivity.

3D MXene-Based Flexible Network for High-Performance Pressure Sensor with a Wide Temperature Range.

With the increasing popularity of smart wearable devices, flexible pressure sensors are highly desired in various complex application scenarios. A great challenge for existing flexible pressure sensors is to maintain high sensitivity over a wide temperature range, which is critical for their applications in harsh environments. Herein, a flexible piezoresistive sensor made of polyetherimide (PEI) fibrous network evenly covered with MXene nanosheets is reported to construct conductive pathways, showing ultrahigh sensitivity over a wide temperature range from -5 °C (sensitivity of 80 kPa ) to 150 °C (20 kPa ), low detection limit of 9 Pa, fast response time of 163 ms, outstanding durability over 10 000 cycles at room temperature, 2000 cycles at 100 °C and 500 cycles at -5 °C.

Maximizing the ion accessibility and high mechanical strength in nanoscale ion channel MXene electrodes for high-capacity zinc-ion energy storage.

Two-dimensional transition-metal carbides (MXenes) have superhydrophilic surfaces and superior metal conductivity, making them competitive in the field of electrochemical energy storage. However, MXenes with layered structures are easily stackable, which reduces the ion accessibility and transport paths, thus limiting their electrochemical performance. To fully exploit the advantages of MXenes in electrochemical energy storage, this study reports the etching of large-sized MXene into nanosheets with nanoscale ion channels via a chemical oxidation method.

3D Porous Structure in MXene/PANI Foam for a High-Performance Flexible Pressure Sensor.

The fields of electronic skin, man-machine interaction, and health monitoring require flexible pressure sensors with great sensitivity. However, most microstructure designs utilized to fabricate high-performance pressure sensors require complex preparation processes. Here, MXene/polyaniline (PANI) foam with 3D porous structure is achieved by using a steam-induced foaming method.

A Zinc-Ion Battery-Type Self-Powered Pressure Sensor with Long Service Life.

Accurate and continuous pressure signal detection without external power supply is a key technology to realize the miniaturization of wearable electronic equipment, the internet of things, and artificial intelligence. However, it is difficult to be achieved by using current sensor technologies. Here, a new one-body strategy, i.

3D Porous MXene Aerogel through Gas Foaming for Multifunctional Pressure Sensor.

The development of smart wearable electronic devices puts forward higher requirements for future flexible electronics. The design of highly sensitive and high-performance flexible pressure sensors plays an important role in promoting the development of flexible electronic devices. Recently, MXenes with excellent properties have shown great potential in the field of flexible electronics.

Flexible MXene/Bacterial Cellulose Film Sound Detector Based on Piezoresistive Sensing Mechanism.

Flexible pressure sensors have aroused extensive attention in health monitoring, human-computer interaction, soft robotics, and more, as a staple member of wearable electronics. However, a majority of traditional research focuses solely on foundational mechanical sensing tests and ordinary human-motion monitoring, ignoring its other applications in daily life. In this work, a paper-based pressure sensor is prepared by using MXene/bacterial cellulose film with three-dimensional isolation layer structure, and its sensing capability as a wearable sound detector has also been studied.

High-Performance Flexible Pressure Sensor with a Self-Healing Function for Tactile Feedback.

High-performance flexible pressure sensors have attracted a great deal of attention, owing to its potential applications such as human activity monitoring, man-machine interaction, and robotics. However, most high-performance flexible pressure sensors are complex and costly to manufacture. These sensors cannot be repaired after external mechanical damage and lack of tactile feedback applications.

Roles of MXene in Pressure Sensing: Preparation, Composite Structure Design, and Mechanism.

Flexible pressure sensors are one of the most important components in the fields of electronic skin (e-skin), robotics, and health monitoring. However, the application of pressure sensors in practice is still difficult and expensive due to the limited sensing properties and complex manufacturing process. The emergence of MXene, a red-hot member of the 2D nanomaterials, has brought a brand-new breakthrough for pressure sensing.