Buried Interface Modulation Using Self-Assembled Monolayer and Ionic Liquid Hybrids for High-Performance Perovskite and Perovskite/CuInGaSe Tandem Photovoltaics.

Effective modifications for the buried interface between self-assembled monolayers (SAMs) and perovskites are vital for the development of efficient, stable inverted perovskite solar cells (PSCs) and their tandem photovoltaics. Herein, an ionic-liquid-SAM hybrid strategy is developed to synergistically optimize the uniformity of SAMs and the crystallization of perovskites above. Specifically, an ionic liquid of 1-butyl-3-methyl-1H-imidazol-3-iumbis((trifluoromethyl)sulfonyl)amide (BMIMTFSI) is incorporated into the SAM solution, enabling reduced surface roughness, improved wettability, and a more evenly distributed surface potential of the SAM film.

Scalable Slot-Die Coating of Passivation Layers for Improved Performance of Perovskite Solar Cell Modules.

Upscaling the perovskite solar cell (PSC) while avoiding losses in the power conversion efficiency presents a substantial challenge, especially when transitioning from ≤1 cm cells to ≥10 cm modules. In addition to the fabrication of key functional layers, scalable technologies for surface passivation, considered indispensable for achieving high-performance PSCs, are urgently required. However, studies on this topic remain limited.

Scalable Fabrication of High-Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition.

Perovskite solar cells (PSCs) can enable renewable electricity generation at low levelized costs, subject to the invention of an economically feasible technology for their large-scale fabrication, like vapor deposition. This approach is effective for the fabrication of small area (<1 cm) PSCs, but its scale-up to produce high-efficiency larger area modules has been limited by a severe imbalance between the vapor-solid reaction kinetics and the mass-transport of the volatile ammonium salt precursor. In this study, an amidine-based low-dimensional perovskite is introduced as an intermediate of the solid-vapor reaction to help resolve this limitation.

Crystallization Modulation and Holistic Passivation Enables Efficient Two-Terminal Perovskite/CuIn(Ga)Se Tandem Solar Cells.

Two-terminal (2-T) perovskite (PVK)/CuIn(Ga)Se (CIGS) tandem solar cells (TSCs) have been considered as an ideal tandem cell because of their best bandgap matching regarding to Shockley-Queisser (S-Q) limits. However, the nature of the irregular rough morphology of commercial CIGS prevents people from improving tandem device performances. In this paper, D-homoserine lactone hydrochloride is proven to improve coverage of PVK materials on irregular rough CIGS surfaces and also passivate bulk defects by modulating the growth of PVK crystals.

[Clinical characteristics of children on prolonged mechanical ventilation due to different primary diseases].

Objectives: To investigate the differences in clinical characteristics among children on prolonged mechanical ventilation (PMV) due to different primary diseases.

Methods: A retrospective analysis was performed on the clinical data of 59 pediatric patients requiring PMV from July 2017 to September 2022. According to the primary disease, they were divided into respiratory disease (RD) group, central nervous system (CNS) group, neuromuscular disease (NMD) group, and other disease group.

Elimination of Intragrain Defect to Enhance the Performance of FAPbI Perovskite Solar Cells by Ionic Liquid.

Ionic liquids have been widely used to improve the efficiency and stability of perovskite solar cells (PSCs), and are generally believed to passivate defects on the grain boundaries of perovskites. However, few studies have focused on the relevant effects of ionic liquids on intragrain defects in perovskites which have been shown to be critical for the performance of PSCs. In this work, the effect of ionic liquid 1-hexyl-3-methylimidazolium iodide (HMII) on intragrain defects of formamidinium lead iodide (FAPbI) perovskite is investigated.

Doping with KBr to Achieve High-Performance CsPbBr Semitransparent Perovskite Solar Cells.

Wide-bandgap semitransparent perovskite photovoltaics are emerging as one of the ideal candidates for building-integrated photovoltaics (BIPV). However, surface defects in inorganic CsPbBr perovskite prepared by vapor deposition severely limit the optoelectronic performance of perovskite solar cells. To address this issue, a strategy of doping a trace amount of KBr into perovskite by vapor deposition is adopted, effectively improving the quality of the film, reducing surface defect concentration, and enhancing the transportation and extraction of charge carriers.

Ordered Perovskite Structure with Functional Units for High Performance and Stable Solar Cells.

Ion migration is one of the most critical challenges that affects the stability of metal-halide perovskite solar cells (PSCs). However, the current arsenal of available strategies for solving this issue is limited. Here, novel perovskite active layers following the concept of ordered structures with functional units (OSFU) to intrinsically suppress ion migration, in which a three-dimensional (3D) perovskite layer is deposited by vapor deposition for light absorption and a 2D layer is deposited by solution process for ion inhibition, are constructed.

LiTFSI-Free Hole Transport Materials for Robust Perovskite Solar Cells and Modules with High Efficiencies.

Lithium bis(trifluoromethane) sulfonamide (LiTFSI) and oxygen-doped organic semiconductors have been frequently used to achieve record power conversion efficiencies of perovskite solar cells (PSCs). However, this conventional doping process is time-consuming and leads to poor device stability due to the incorporation of Li ions. Herein, aiming to accelerate the doping process and remove the Li ions, we report an alternative p-doping process by mixing a new small-molecule organic semiconductor, ,,,-tetrakis (4-methoxyphenyl)-9-(4-(octyloxy) phenyl)-9 carbazole-2,7-diamine (labeled OH44) and its preoxidized form OH44(TFSI).

Eliminating Non-Corner-Sharing Octahedral for Efficient and Stable Perovskite Solar Cells.

The metal halide (BX) octahedron, where B represents a metal cation and X represents a halide anion, is regarded as the fundamental structural and functional unit of metal halide perovskites. However, the influence of the way the (BX) octahedra connect to each other has on the structural stability and optoelectronic properties of metal halide perovskite is still unclear. Here, the octahedral connectivity, including corner-, edge-, and face-sharing, of various CsFAPbI (0 ≤ x ≤ 0.

Photoexcitation-induced passivation of SnO thin film for efficient perovskite solar cells.

A high-quality tin oxide electron transport layer (ETL) is a key common factor to achieve high-performance perovskite solar cells (PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses.

Grain Boundary Elimination via Recrystallization-Assisted Vapor Deposition for Efficient and Stable Perovskite Solar Cells and Modules.

Vapor deposition is a promising technology for the mass production of perovskite solar cells. However, the efficiencies of solar cells and modules based on vapor-deposited perovskites are significantly lower than those fabricated using the solution method. Emerging evidence suggests that large defects are generated during vapor deposition owing to a specific top-down crystallization mechanism.

Monolithically-grained perovskite solar cell with Mortise-Tenon structure for charge extraction balance.

Although the power conversion efficiency values of perovskite solar cells continue to be refreshed, it is still far from the theoretical Shockley-Queisser limit. Two major issues need to be addressed, including disorder crystallization of perovskite and unbalanced interface charge extraction, which limit further improvements in device efficiency. Herein, we develop a thermally polymerized additive as the polymer template in the perovskite film, which can form monolithic perovskite grain and a unique "Mortise-Tenon" structure after spin-coating hole-transport layer.

Printable High-Efficiency and Stable FAPbBr Perovskite Solar Cells for Multifunctional Building-Integrated Photovoltaics.

Perovskite solar cells (PSCs) show great promise for next-generation building-integrated photovoltaic (BIPV) applications because of their abundance of raw materials, adjustable transparency, and cost-effective printable processing. Owing to the complex perovskite nucleation and growth control, the fabrication of large-area perovskite films for high-performance printed PSCs is still under active investigation. Herein, the study proposes an intermediate-phase-transition-assisted one-step blade coating for an intrinsic transparent formamidinium lead bromide (FAPbBr ) perovskite film.

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α-FAPbI Phase Transition for High Efficiency Perovskite Solar Cells.

The α-phase formamidinium lead tri-iodide (α-FAPbI ) has become the most promising photovoltaic absorber for perovskite solar cells (PSCs) due to its outstanding semiconductor properties and astonishing high efficiency. However, the incomplete crystallization and phase transition of α-FAPbI substantially undermine the performance and stability of PSCs. In this work, a series of the protic amine carboxylic acid ion liquids are introduced as the precursor additives to efficiently regulate the crystal growth and phase transition processes of α-FAPbI .

Low-Cost Fabrication of Efficient Perovskite Photovoltaics Using Low-Purity Lead Iodide via Powder Engineering.

Low cost is the eternal theme for any commercial production. Numerous efforts have been explored to realize low-cost, high-efficiency perovskite solar cells (PSCs), such as replacing the traditional spin-coating method with an economical printing strategy, simplifying the device structure, reducing the number of functional layers, . However, there are few reports on the use of low-cost precursors.

Low-Cost Hydroxyacid Potassium Synergists as an Efficient In Situ Defect Passivator for High Performance Tin-Oxide-Based Perovskite Solar Cells.

Perovskite solar cells (PSCs) based on SnO electron transport layers have attracted extensive research due to their compelling photovoltaic performance. Herein, we presented an in situ passivation of SnO with low-cost hydroxyacid potassium synergist during deposition to optimize the interface carrier extraction and transport for high power conversion efficiency (PCE) and stabilities of PSCs. The orbital overlap of the carboxyl oxygen with the Sn atom alongwith the homogenous nano-particle deposition effectively suppresses the interfacial defects and releases the internal residual strains in the perovskite.

Enhanced Carrier Diffusion Enables Efficient Back-Contact Perovskite Photovoltaics.

Back-contact architectures offer a promising route to improve the record efficiencies of perovskite solar cells (PSCs) by eliminating parasitic light absorption. However, the performance of back-contact PSCs is limited by inadequate carrier diffusion in perovskite. Here, we report that perovskite films with a preferred out-of-plane orientation show improved carrier dynamic properties.

Highly Crystalline Graphene as the Atomic 2D Blanket of a Perovskite Absorber for Enhanced Photovoltaic Performance.

Perovskite solar cells (PSCs) have demonstrated enormous potential for next-generation low-cost photovoltaics. However, due to the intrinsically low bond energy of the perovskite lattice, the long-term stability is normally undermined by ion migration initiated by the electric field and atmospheric conditions. Therefore, ideal ion migration inhibition is important to achieve an enhanced stability of PSCs.

Mitigating the Internal Ion Migration of Organic-Inorganic Hybrid Perovskite by a Graphene Oxide Interlayer.

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted great research attention due to their outstanding optoelectronic properties. The low-temperature synthesizing process of organic-inorganic hybrid perovskites can provide a significant advantage of reducing the manufacturing cost of solar cells. However, at the same time, this also brings challenges to PSCs in the form of long-term stability.

All-vacuum deposited perovskite solar cells with glycine modified NiO hole-transport layers.

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted enormous research attention due to their high efficiency and low cost. However, most of the PSCs with high efficiencies still need expensive organic materials as their hole-transport layer (HTL). Obviously, the highly expensive materials go against the low-cost concept of advanced PSCs.

Differentiated Functions of Potassium Interface Passivation and Doping on Charge-Carrier Dynamics in Perovskite Solar Cells.

The inclusion of potassium in perovskite solar cells (PSCs) has been widely demonstrated to enhance the power conversion efficiency and eliminate the hysteresis effect. However, the effects of the locations K cations on the charge-carrier dynamics remain unknown with respect to achieving a more delicate passivation design for perovskite interfaces and bulk films. Herein, we employ the combined electrical and ultrafast dynamics analysis for the perovskite film to distinguish the effects of bulk doping and interfacial passivation of the potassium cation.

Self-Enhancement of Efficiency and Self-Attenuation of Hysteretic Behavior of Perovskite Solar Cells with Aging.

Spontaneous enhancement of the photovoltaic performance of perovskite solar cells (PSCs) after aging has been reported, but the underlying reasons for such behavior are still under debate. Herein, we demonstrate that this spontaneous improvement effect accompanied by self-attenuation of hysteresis in the current-voltage characteristics is time- and temperature-dependent. Moreover, it is universal to PSCs based on a range of mixed-ion perovskites and coupled to different hole- and electron-transporting materials.