Ecofriendly Synthesis of Waste-Tire-Derived Graphite Nanoflakes by a Low-Temperature Electrochemical Graphitization Process toward a Silicon-Based Anode with a High-Performance Lithium-Ion Battery.

Here, the successful transformation of graphitic carbon with a high degree of graphitization and a nanoflake structure from pyrolytic tire carbon black was demonstrated. First, amorphous carbon black with a porous structure was obtained after pyrolysis and simple preacid treatments. Subsequently, the carbon black was converted into a highly graphitic structure at a relatively low temperature (850 °C) through a facile electrochemical route using molten salt, which is ecofriendly and has high potential for large-scale graphitization compared to conventional incineration techniques.

Cultural Adaptation and Validation of Mullen Scales of Early Learning in Taiwanese children with Autism Spectrum Disorder, Global Developmental Delay, and Typically Developing Children.

Background: The Mullen Scales of Early Learning (MSEL) is a standardized comprehensive developmental assessment tool for children aged 0-68 months. However, few Asia-based studies have explored cultural and linguistic adaptations of the MSEL or investigated its psychometric properties in populations with autism spectrum disorder (ASD).

Aims: This study evaluated the reliability and validity of the MSEL-Taiwan version (MSEL-T) for Taiwanese children with ASD, global developmental delay (GDD), and typical development (TD).

Multifunctional Ion-Sensitive Floating Gate Fin Field-Effect Transistor with Three-Dimensional Nanoseaweed Structure by Glancing Angle Deposition Technology.

A multifunctional ion-sensitive floating gate Fin field-effect transistor (ISFGFinFET) for hydrogen and sodium detection is demonstrated. The ISFGFinFET comprises a FGFET and a sensing film, both of which are used to detect and improve sensitivity. The sensitivity of the ISFGFinFET can be adjusted by modulating the coupling effect of the FG.

Artificial Synapse Based on a 2D-SnO Memtransistor with Dynamically Tunable Analog Switching for Neuromorphic Computing.

A new type of two-dimensional (2D) SnO semiconductor-based gate-tunable memristor, that is, a memtransistor, an integrated device of a memristor and a transistor, was demonstrated to advance next-generation neuromorphic computing technology. The polycrystalline 2D-SnO memristors derived from a low-temperature and vacuum-free liquid metal process offer several interesting resistive switching properties such as excellent digital/analog resistive switching, multistate storage, and gate-tunability function of resistance switching states. Significantly, the gate tunability function that is not achievable in conventional two-terminal memristors provides the capability to implement heterosynaptic analog switching by regulating gate bias for enabling complex neuromorphic learning.

Current-Accelerated Phase Cycling with Metallic and Semiconducting Switching in Copper Nanobelts at Room Temperature.

Here, a current-accelerated phase cycling by an current-induced oxidation process was demonstrated to reversibly switch the local metallic Cu and semiconducting CuO phases of patterned polycrystalline copper nanobelts. Once the Cu nanobelts were applied by a direct-current bias of ∼0.5 to 1 V in air with opposite polarities, the resistance between several hundred ohms and more than MΩ can be manipulated.

Three-Dimensional Molybdenum Diselenide Helical Nanorod Arrays for High-Performance Aluminum-Ion Batteries.

The rechargeable aluminum-ion battery (AIB) is a promising candidate for next-generation high-performance batteries, but its cathode materials require more development to improve their capacity and cycling life. We have demonstrated the growth of MoSe three-dimensional helical nanorod arrays on a polyimide substrate by the deposition of Mo helical nanorod arrays followed by a low-temperature plasma-assisted selenization process to form novel cathodes for AIBs. The binder-free 3D MoSe-based AIB shows a high specific capacity of 753 mAh g at a current density of 0.

High-Performance Rechargeable Aluminum-Selenium Battery with a New Deep Eutectic Solvent Electrolyte: Thiourea-AlCl.

Aluminum-sulfur batteries (ASBs) have attracted substantial interest due to their high theoretical specific energy density, low cost, and environmental friendliness, while the traditional sulfur cathode and ionic liquid have very fast capacity decay, limiting cycling performance because of the sluggishly electrochemical reaction and side reactions with the electrolyte. Herein, we demonstrate, for the first time, excellent rechargeable aluminum-selenium batteries (ASeBs) using a new deep eutectic solvent, thiourea-AlCl, as an electrolyte and Se nanowires grown directly on a flexible carbon cloth substrate (Se NWs@CC) by a low-temperature selenization process as a cathode. Selenium (Se) is a chemical analogue of sulfur with higher electronic conductivity and lower ionization potential that can improve the battery kinetics on the sluggishly electrochemical reaction and the reduction of the polarization where the thiourea-AlCl electrolyte can stabilize the side reaction during the reversible conversion reaction of Al-Se alloying processes during the charge-discharge process, yielding a high specific capacity of 260 mAh g at 50 mA g and a long cycling life of 100 times with a high Coulombic efficiency of nearly 93% at 100 mA g.

An indoor light-activated 3D cone-shaped MoS bilayer-based NO gas sensor with PPb-level detection at room-temperature.

Utilization of light to boost the performance of gas sensors allows us to operate sensor devices at room temperature. Here, we, for the first time, demonstrated an indoor light-activated 3D cone-shaped MoS2 bilayer-based NO gas sensor with ppb-level detection operated at room-temperature. Large-area cone-shaped (CS)-MoS2 bilayers were grown by depositing 2 nm-thick MoO3 layers on a 2'' three-dimensional (3D) cone-patterned sapphire substrate (CPSS) followed by a sulfurization process via chemical vapor deposition.

Environmentally and Mechanically Stable Selenium 1D/2D Hybrid Structures for Broad-Range Photoresponse from Ultraviolet to Infrared Wavelengths.

Selenium (Se) is one of the potential candidates as photodetector because of its outstanding properties such as high photoconductivity (∼8 × 10 S cm), piezoelectricity, thermoelectricity, and nonlinear optical responses. Solution phase synthesis becomes an efficient way to produce Se, but a contamination issue that could deteriorate the electric characteristic of Se should be taken into account. In this work, a facile, controllable approach of synthesizing Se nanowires (NWs)/films via a plasma-assisted growth process was demonstrated at the low substrate temperature of 100 °C.

Wafer Scale Phase-Engineered 1T- and 2H-MoSe /Mo Core-Shell 3D-Hierarchical Nanostructures toward Efficient Electrocatalytic Hydrogen Evolution Reaction.

The necessity for new sources for greener and cleaner energy production to replace the existing ones has been increasingly growing in recent years. Of those new sources, the hydrogen evolution reaction has a large potential. In this work, for the first time, MoSe /Mo core-shell 3D-hierarchical nanostructures are created, which are derived from the Mo 3D-hierarchical nanostructures through a low-temperature plasma-assisted selenization process with controlled shapes grown by a glancing angle deposition system.

Polyvinylpyrrolidone-induced anisotropic growth of gold nanoprisms in plasmon-driven synthesis.

After more than a decade, it is still unknown whether the plasmon-mediated growth of silver nanostructures can be extended to the synthesis of other noble metals, as the molecular mechanisms governing the growth process remain elusive. Herein, we demonstrate the plasmon-driven synthesis of gold nanoprisms and elucidate the details of the photochemical growth mechanism at the single-nanoparticle level. Our investigation reveals that the surfactant polyvinylpyrrolidone preferentially adsorbs along the nanoprism perimeter and serves as a photochemical relay to direct the anisotropic growth of gold nanoprisms.

Facile Growth of Cu2ZnSnS4 Thin-Film by One-Step Pulsed Hybrid Electrophoretic and Electroplating Deposition.

The use of costly and rare metals such as indium and gallium in Cu(In,Ga)Se2 (CIGS) based solar cells has motivated research into the use of Cu2ZnSnS4 (CZTS) as a suitable replacement due to its non-toxicity, abundance of compositional elements and excellent optical properties (1.5 eV direct band gap and absorption coefficient of ~10(4) cm(-1)). In this study, we demonstrate a one-step pulsed hybrid electrodeposition method (PHED), which combines electrophoretic and electroplating deposition to deposit uniform CZTS thin-films.

Enhanced Conversion Efficiency of Cu(In,Ga)Se2 Solar Cells via Electrochemical Passivation Treatment.

Defect control in Cu(In,Ga)Se2 (CIGS) materials, no matter what the defect type or density, is a significant issue, correlating directly to PV performance. These defects act as recombination centers and can be briefly categorized into interface recombination and Shockley-Read-Hall (SRH) recombination, both of which can lead to reduced PV performance. Here, we introduce an electrochemical passivation treatment for CIGS films that can lower the oxygen concentration at the CIGS surface as observed by X-ray photoelectron spectrometer analysis.

Large-scale micro- and nanopatterns of Cu(In,Ga)Se2 thin film solar cells by mold-assisted chemical-etching process.

A reactive mold-assisted chemical etching (MACE) process through an easy-to-make agarose stamp soaked in bromine methanol etchant to rapidly imprint larger area micro- and nanoarrays on CIGS substrates was demonstrated. Interestingly, by using the agarose stamp during the MACE process with and without additive containing oil and triton, CIGS microdome and microhole arrays can be formed on the CIGS substrate. Detailed formation mechanisms of microstructures and the chemical composition variation after the etching process were investigated.

Extraction of heavy metals from contaminated soil by Cinnamomum camphora.

83 acres of rice paddy fields in Taoyuan county, Taiwan, were polluted by cadmium (Cd), chromium (Cr) and copper (Cu) through a nearby irrigation channel, and rice plantation was ceased in 1987. Camphor trees (Cinnamomum camphora) have been planted in 2 acre of the above fields since 1991. Heavy metal accumulation of roots, leaves, branches and heartwood of camphor trees were analyzed during 20-year afforestation.

Single CuO(x) nanowire memristor: forming-free resistive switching behavior.

CuOx nanowires were synthesized by a low-cost and large-scale electrochemical process with AAO membranes at room temperature and its resistive switching has been demonstrated. The switching characteristic exhibits forming-free and low electric-field switching operation due to coexistence of significant amount of defects and Cu nanocrystals in the partially oxidized nanowires. The detailed resistive switching characteristics of CuOx nanowire systems have been investigated and possible switching mechanisms are systematically proposed based on the microstructural and chemical analysis via transmission electron microscopy.

Surface plasmon-driven water reduction: gold nanoparticle size matters.

Water reduction under two different visible-light ranges (λ > 400 nm and λ > 435 nm) was investigated in gold-loaded titanium dioxide (Au-TiO2) heterostructures with different sizes of Au nanoparticles (NPs). Our study clearly demonstrates the essential role played by Au NP size in plasmon-driven H2O reduction and reveals two distinct mechanisms to clarify visible-light photocatalytic activity under different excitation conditions. The size of the Au NP governs the efficiency of plasmon-mediated electron transfer and plays a critical role in determining the reduction potentials of the electrons transferred to the TiO2 conduction band.

An in situ approach for facile fabrication of robust and scalable SERS substrates.

The widespread implementation of surface enhanced Raman scattering (SERS) techniques for chemical and biological detection requires an inexpensive, yet robust SERS substrate with high sensitivity and reproducibility. To that end, we present a facile method to fabricate plasmonic SERS substrates with well-distributed SERS "hot spots" on a large scale with reproducible SERS enhancement factors of ∼10(8) for the Raman probe molecule 4-aminobenzenethiol (4-ABT). The SERS enhancement is attributed to the synergistic interactions between the strong plasmonic coupling among the assembled Au NPs and the structure-associated tip enhancement.

Large scale and orientation-controllable nanotip structures on CuInS₂, Cu(In,Ga)S₂, CuInSe₂, and Cu(In,Ga)Se₂ by low energy ion beam bombardment process: growth and characterization.

One-step facile methodology to create nanotip arrays on chalcopyrite materials (such as CuInS2, Cu(In,Ga)S2, CuInSe2, and Cu(In,Ga)Se2) via a low energy ion beam bombardment process has been demonstrated. The mechanism of formation for nanotip arrays has been proposed by sputtering yields of metals and reduction of metals induced by the ion beam bombardment process. The optical reflectance of these chalcopyrite nanotip arrays has been characterized by UV-vis spectrophotometer and the efficient light-trapping effect has been observed.

Non-antireflective scheme for efficiency enhancement of Cu(In,Ga)Se2 nanotip array solar cells.

We present systematic works in characterization of CIGS nanotip arrays (CIGS NTRs). CIGS NTRs are obtained by a one-step ion-milling process by a direct-sputtering process of CIGS thin films (CIGS TF) without a postselenization process. At the surface of CIGS NTRs, a region extending to 100 nm in depth with a lower copper concentration compared to that of CIGS TF has been discovered.

Influence of catalyst choices on transport behaviors of InAs NWs for high-performance nanoscale transistors.

The influence of the catalyst materials on the electron transport behaviors of InAs nanowires (NWs) grown by a conventional vapor transport technique is investigated. Utilizing the NW field-effect transistor (FET) device structure, ~20% and ~80% of Au-catalyzed InAs NWs exhibit strong and weak gate dependence characteristics, respectively. In contrast, ~98% of Ni-catalyzed InAs NWs demonstrate a uniform n-type behavior with strong gate dependence, resulting in an average OFF current of ~10(-10) A and a high I(ON)/I(OFF) ratio of >10(4).

Surface plasmon mediated chemical solution deposition of gold nanoparticles on a nanostructured silver surface at room temperature.

Sub-15 nm Au nanoparticles have been fabricated on a nanostructured Ag surface at room temperature via a liquid-phase chemical deposition upon excitation of the localized surface plasmon resonance (SPR). Measurement of the SPR-mediated photothermal local heating of the substrate surface by a molecular thermometry strategy indicated the temperature to be above 230 °C, which led to an efficient decomposition of CH(3)AuPPh(3) to form Au nanoparticles on the Ag surface. Particle sizes were tunable between 3 and 10 nm by adjusting the deposition time.

Resistive switching of Au/ZnO/Au resistive memory: an in situ observation of conductive bridge formation.

A special chip for direct and real-time observation of resistive changes, including set and reset processes based on Au/ZnO/Au system inside a transmission electron microscope (TEM), was designed. A clear conducting bridge associated with the migration of Au nanoparticles (NPs) inside a defective ZnO film from anode to cathode could be clearly observed by taking a series of TEM images, enabling a dynamic observation of switching behaviors. A discontinuous region (broken region) nearby the cathode after reset process was observed, which limits the flow of current, thus a high resistance state, while it will be reconnected to switch the device from high to low resistance states through the migration of Au NPs after set process.

The roles of transforming growth factor-β₁ and vascular endothelial growth factor in the tracheal granulation formation.

Background: Acquired tracheal stenosis is common in patients with a long-term tracheostomy and granulation is one of the most commonly observed lesions in benign airway stenosis. The aim of this study was to investigate the mechanisms of tracheal granulation formation and find the potential therapeutic targets to prevent the granulation formation.

Results: In granulation tissue obtained from patients during interventional bronchoscopy for the relief of airway obstruction, increased expression of transforming growth factor (TGF)-β₁ and vascular endothelial growth factor (VEGF), as well as increased numbers of fibroblasts, was found by immunohistochemical staining.