Publications by authors named "Yasuo Ando"

A magnetocardiograph that enables the clear observation of heart magnetic field mappings without magnetically shielded rooms at room temperatures has been successfully manufactured. Compared to widespread electrocardiographs, magnetocardiographs commonly have a higher spatial resolution, which is expected to lead to early diagnoses of ischemic heart disease and high diagnostic accuracy of ventricular arrhythmia, which involves the risk of sudden death. However, as the conventional superconducting quantum interference device (SQUID) magnetocardiographs require large magnetically shielded rooms and huge running costs to cool the SQUID sensors, magnetocardiography is still unfamiliar technology.

View Article and Find Full Text PDF

Non-invasive human brain functional imaging with millisecond resolution can be achieved only with magnetoencephalography (MEG) and electroencephalography (EEG). MEG has better spatial resolution than EEG because signal distortion due to inhomogeneous head conductivity is negligible in MEG but serious in EEG. However, this advantage has been practically limited by the necessary setback distances between the sensors and scalp, because the Dewar vessel containing liquid helium for superconducting quantum interference devices (SQUIDs) requires a thick vacuum wall.

View Article and Find Full Text PDF

Thanks to high sensitivity, excellent scalability, and low power consumption, magnetic tunnel junction (MTJ)-based tunnel magnetoresistance (TMR) sensors have been widely implemented in various industrial fields. In nondestructive magnetic flux leakage testing, the magnetic sensor plays a significant role in the detection results. As highly sensitive sensors, integrated MTJs can suppress frequency-dependent noise and thereby decrease detectivity; therefore, serial MTJ-based sensors allow for the design of high-performance sensors to measure variations in magnetic fields.

View Article and Find Full Text PDF

Thanks to their high magnetoresistance and integration capability, magnetic tunnel junction-based magnetoresistive sensors are widely utilized to detect weak, low-frequency magnetic fields in a variety of applications. The low detectivity of MTJs is necessary to obtain a high signal-to-noise ratio when detecting small variations in magnetic fields. We fabricated serial MTJ-based sensors with various junction area and free-layer electrode aspect ratios.

View Article and Find Full Text PDF

We studied the effect of second-order magnetic anisotropy on the linear conductance output of magnetic tunnel junctions (MTJs) for magnetic-field-sensor applications. Experimentally, CoFeB/MgO/CoFeB-based MTJs were fabricated, and the nonlinearity, NL was evaluated for different thicknesses, t of the CoFeB free layer from the conductance. As increasing t from 1.

View Article and Find Full Text PDF

Magnetic flux leakage (MFL) testing is a method of non-destructive testing (NDT), whereby the material is magnetized, and when a defect is present, the magnetic flux lines break out of the material. The magnitude of the leaked magnetic flux decreases as the lift-off (distance from the material) increases. Therefore, for detection at high lift-off, a sensitive magnetic sensor is required.

View Article and Find Full Text PDF

The effects of Nd2Fe14B grain size and Nd coating on the coercivity in sputter-deposited Nd-Fe-B/Nd thin films have been investigated in order to gain an insight into the coercivity mechanism of Nd-Fe-B magnets. Highly textured Nd2Fe14B particles were grown successfully on the MgO(100) single-crystal substrate with the Mo underlayer. As the Nd-Fe-B layer thickness t NFB was decreased from 70 to 5 nm, the coercivity H c increased gradually from 6.

View Article and Find Full Text PDF

Synthetic perpendicular magnetic anisotropy (PMA) ferrimagnets consisting of 30-nm-thick D0-MnGa and Co₂MnSi (CMS) cubic Heusler alloys with different thicknesses of 1, 3, 5, 10 and 20 nm, buffered and capped with a Cr film, are successfully grown epitaxially on MgO substrate. Two series samples with and without post annealing at 400 °C are fabricated. The (002) peak of the cubic L2₁ structure of CMS films on the MnGa layer is observed, even for the 3-nm-thick CMS film for both un-annealed and annealed samples.

View Article and Find Full Text PDF

Nitrification, the biological oxidation of ammonium to nitrate, weakens the soil's ability to retain N and facilitates N-losses from production agriculture through nitrate-leaching and denitrification. This process has a profound influence on what form of mineral-N is absorbed, used by plants, and retained in the soil, or lost to the environment, which in turn affects N-cycling, N-use efficiency (NUE) and ecosystem health and services. As reactive-N is often the most limiting in natural ecosystems, plants have acquired a range of mechanisms that suppress soil-nitrifier activity to limit N-losses via N-leaching and denitrification.

View Article and Find Full Text PDF

Ultraviolet photoemission spectroscopy (UPS) is a powerful tool to study the electronic spin and symmetry features at both surfaces and interfaces to ultrathin top layers. However, the very low mean free path of the photoelectrons usually prevents a direct access to the properties of buried interfaces. The latter are of particular interest since they crucially influence the performance of spintronic devices like magnetic tunnel junctions (MTJs).

View Article and Find Full Text PDF

Spin dynamics excited by spin-polarized current in magnetic tunnel junctions (MTJs) is potentially useful in nanoscale electrical oscillation sources and detection devices. A spin oscillator/detector should work at a high frequency, such as that of a millimeter-wave, where the quality of a semiconductor device is restricted by carrier mobility, the CR time constant, and so on. Developers of spin systems for practical use need to find out how to excite spin dynamics (i) in the millimeter-wave region, (ii) with low power consumption (ex: no external magnetic field, low damping material), and (iii) for broad frequency modulation.

View Article and Find Full Text PDF

The integration of organic semiconductors and magnetism has been a fascinating topic for fundamental scientific research and future applications in electronics, because organic semiconductors are expected to possess a large spin-dependent transport length based on weak spin-orbit coupling and weak hyperfine interaction. However, to date, this length has typically been limited to several nanometres at room temperature, and a large length has only been observed at low temperatures. Here we report on a novel organic spin valve device using C(60) as the spacer layer.

View Article and Find Full Text PDF

We investigate the ultrafast demagnetization for two Heusler alloys (Co₂Mn(1-x)FexSi) with a different lineup of the minority band gap and the Fermi level. Even though electronic spin-flip transitions are partially blocked by the band gap in one compound, the respective magnetization dynamics, as measured by the time-resolved Kerr effect, are remarkably similar. Based on a dynamical model that includes momentum and spin-dependent carrier scattering, we show that the magnetization dynamics are dominated by hole spin-flip processes, which are not influenced by the gap.

View Article and Find Full Text PDF

In this Note, we present a dual-beam magneto-optical Kerr effect (MOKE) magnetometer for the study of quadratic MOKE in magnetic thin films. The two beams simultaneously probe the sample, located in the middle of a quadrupole magnet, at two angles of incidence (0 degrees and 45 degrees). This combination of two systems allows one to automatically and routinely perform measurements that are sensitive to the combined longitudinal and quadratic MOKE signals (45 degrees), or the quadratic effect alone (0 degrees).

View Article and Find Full Text PDF