Effect of Aging Treatment on the Corrosion Resistance Properties of 7N01 Extrusion Aluminum Alloy.

The influences of non-isothermal aging (the temperature range is 150-180 °C, and the heating rate is 5 and 20 °C/h alternately), single-peak aging (aging at 120 °C for 24 h, then water quenched was followed at room temperature), and two-stage aging (aging at 105 °C for 8 h first, then increasing aging temperature to 135 °C and keeping for 12 h, followed by water quenching at room temperature) on the corrosion resistance and microstructure of the 7N01 aluminum alloy under 3.5 wt.% NaCl were investigated using electric polarization curve test and exfoliation corrosion.

Effect of Graphene Nanosheet Addition on the Wettability and Mechanical Properties of Sn-20Bi-xGNS/Cu Solder Joints.

Graphene nanosheets (GNSs) have an extensive application in materials modification. In this study, the effects of graphene nanosheets on the wettability of Sn-20Bi lead-free solder on copper (Cu) substrate and the growth behavior of intermetallic compound (IMC) layers at Sn-20Bi-xGNS/Cu solder joints were investigated. The experimental results indicate that the wettability of Sn-20Bi solder firstly diminished and then increased by the addition of GNSs.

Enhanced H sorption performance of magnesium hydride with hard-carbon-sphere-wrapped nickel.

Magnesium hydride is regarded as one of the most ideal candidates for hydrogen storage, but its relatively high operating temperatures and slow kinetics always hinder its commercial applications. Herein, we first fabricated hard-carbon-sphere-wrapped Ni (Ni/HCS) a mild chemical method; subsequently, the as-prepared additive was introduced to fabricate an Mg-Ni/HCS composite by using hydriding combustion synthesis. Hard carbon spheres (HCS) effectively inhibited the agglomeration of hydride particles during hydrogen storage cycling; they could also provide active sites to promote the nucleation of Mg-based hydrides.