Effect of ethanol addition on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes.

The effects of ethanol on the physicochemical, structural and in vitro digestive properties of Tartary buckwheat starch-quercetin/rutin complexes (e-TBSQ and e-TBSR) were investigated. Ethanol restricted the gelatinization of Tartary buckwheat starch (TBS), which resulted an increase in ∆H, G' and G" as well as a decrease in apparent viscosity of e-TBSQ and e-TBSR. The particle size, scanning electron microscopy and X-ray diffraction results showed that ethanol influenced the morphological structure of TBS granules and the starch crystalline structure in e-TBSQ and e-TBSR changed from B-type to V-type when the ethanol concentration was 25%.

Highly Anisotropic Thermal Conductivity of Three-Dimensional Printed Boron Nitride-Filled Thermoplastic Polyurethane Composites: Effects of Size, Orientation, Viscosity, and Voids.

Extrusion-based three-dimensional (3D) printing techniques usually exhibit anisotropic thermal, mechanical, and electric properties due to the shearing-induced alignment during extrusion. However, the transformation from the extrusion to stacking process is always neglected and its influence on the final properties remains ambiguous. In this work, we adopt two different sized boron nitride (BN) sheets, namely, small-sized BN (S-BN) and large-sized BN (L-BN), to explore their impact on the orientation degree, morphology, and final anisotropic thermal conductivity (TC) of thermoplastic polyurethane (TPU) composites by fused deposition modeling.

Highly Thermally Conductive 3D Printed Graphene Filled Polymer Composites for Scalable Thermal Management Applications.

Efficient thermal transportation in a preferred direction is highly favorable for thermal management issues. The combination of 3D printing and two-dimensional (2D) materials such as graphene, BN, and so on enables infinite possibilities for hierarchically aligned structure programming. In this work, we report the formation of the asymmetrically aligned structure of graphene filled thermoplastic polyurethane (TPU) composites during 3D printing process.

Melt Processable Novolac Cyanate Ester/Biphenyl Epoxy Copolymer Series with Ultrahigh Glass-Transition Temperature.

The rapid progress in silicon carbide (SiC)-based technology for high-power applications expects an increasing operation temperature (up to 250 °C) and awaits reliable packaging materials to unleash their full power. Epoxy-based encapsulant materials failed to provide satisfactory protection under such high temperatures due to the intrinsic weakness of epoxy resins, despite their unmatched good adhesion and processability. Herein, we report a series of copolymers made by melt blending novolac cyanate ester and tetramethylbiphenyl epoxy (NCE/EP) that have demonstrated much superior high-temperature stability over current epoxies.

Graphite films/carbon fiber fabric/ polyurethane composites with ultrahigh in-plane thermal conductivity and enhanced mechanical properties.

Thermally conductive composites have attracted great attention in virtue of their crucial role in thermal management. In this work, laminated composites were prepared by laying graphite films (GF) and carbon fiber fabrics (CF) in a certain order, then penetrating thermoplastic polyurethane (TPU), finally hot-pressing. In order to enhance the inter-layer strength, the graphite films were perforated with arrays of 1 mm holes in diameter which have intervals of 4 mm and permit the seeping of liquid TPU through them.

Three-Dimensional Graphene Foam-Filled Elastomer Composites with High Thermal and Mechanical Properties.

To meet the increasing demands for effective heat management of electronic devices, a graphene-based polymeric composite is considered to be one of the candidate materials owing to the ultrahigh thermal conductivity (TC) of graphene. However, poor graphene dispersion, low quality of exfoliated graphene, and strong phonon scattering at the graphene/matrix interface restrict the heat dissipation ability of graphene-filled composites. Here, a facile and versatile approach to bond graphene foam (GF) with polydimethylsiloxane (PDMS) is proposed, and the corresponding composite with considerable improvement in TC and insulativity is fabricated.