Effect of copper ions on transformation of organic sulfur in cationic exchange resins in LiCO-NaCO-KCO molten-salt system.

Cationic exchange resins (CERs) were applied for purification and clarifying process of radioactive wastewater in nuclear industry, which was a kind of sulfur-containing organic material. Molten-salt oxidation (MSO) method can be applied for the treatment of spent CERs and the absorption of acid gas (such as SO). The experiments about the molten salt destruction of the original resin and Cu ions doped resin were conducted.

Decontamination of uranium-containing radioactive waste from stainless steel surfaces using NaOH-based molten salts.

Herein, we report a new strategy for the rapid removal of uranium-containing contaminants from metal surfaces, and it relies on decontaminants made of NaOH-based molten salts. The addition of NaCO and NaCl to NaOH exhibited superior decontamination performance, with a decontamination rate of 93.8% within 12 min, outdoing the performance of the single NaOH molten salt.

Effects of oxygen content on gaseous and solid products during molten salt oxidation of cation exchange resins.

Molten salt oxidation (MSO) is an advanced method for waste resins treatment; nevertheless, the research about gas product variations of resins under different stoichiometric air feed coefficient (α) is rare. The optimal working condition of hazardous waste disposal is obtained through thermodynamic equilibrium calculation, and the method to improve the treatment efficiency is found to guide the optimization of the actual experiment. In this paper, Fact Sage was used to calculate the oxidation products of cation exchange resins (CERs) at different temperatures and α, focusing on the similarities and differences through the contents of CO, CH, CO, and SO during the oxidation of CERs, the MSO of CERs, and the theoretical calculation.

Catalytic effect of cesium on the oxidation behavior of cation exchange resins in LiCO-NaCO-KCO melt.

After the treatment of liquid radioactive waste, there is a certain amount of Cs in the waste resin, and these Cs-doped resins are prone to volatilize during the thermal treatment process and cause radionuclide leakage. The molten salt oxidation (MSO) can effectively prevent the volatilization of toxic metal, especially the volatilization of Cs. Under nitrogen and air conditions, it is found that the oxidation behavior between Cs-doped and clean cation exchange resins (CERs) is quite different.