Improvement in thallium hydride generation using iodide and Rhodamine B.

A continuous flow hydride generation atomic absorption spectrometry (CF-HG-AAS) system was used to study the enhancement effect of different substances for conventional chemical HG of thallium. At room temperature, the acidified sample solution containing the respective enhancement reagent merged with the aqueous NaBH4 solution. The generated thallium hydride was stripped from the eluent solution by the addition of a nitrogen flow and thereafter the bulk phases were separated in a gas-liquid separator.

On-line generation and hydrolysis of methyl borate for the spectrophotometric determination of boron in soil and plants with azomethine-H.

A continuous-flow system for boron determination in soils and plants with spectrophotometric detection using the azometihine-H-boron complex method was developed. In order to avoid the interferences of concomitants present in samples and to increase the sensitivity, the element was separated on-line from the matrix by methyl borate generation. For this purpose, a concentrated sulfuric acid sample solution was combined with methanol in 1:3 ratio which produce enough heating for the esterification reaction without external source.

On-line electrochemical preconcentration and flame atomic absorption spectrometric determination of manganese in urine samples.

A sensitive and selective method was developed for the determination of traces of manganese in urine using on-line electrochemical preconcentration followed by flame atomic absorption spectrometry detection. A home made flow-through polypropylene cell (4.5cm longx0.

Determination of aluminum by electrothermal atomic absorption spectroscopy in lubricating oils emulsified in a sequential injection analysis system.

The sequential injection (SIA) technique was applied for the on-line preparation of an "oil in water" microemulsion and for the determination of aluminum in new and used lubricating oils by electrothermal atomic absorption spectrometry (ET AAS) with Zeeman-effect background correction. Respectively, 1.0, 0.

Continuous flow system for lead determination by faas in spirituous beverages with solid phase extraction and on-line copper removal.

A continuous flow system for the determination of lead in home made spirituous beverages was developed. The determination was based on the formation of a neutral chelate of the element with ammonium pyrrolidine dithiocarbamate, its adsorption onto a minicolumn packed with sodium faujasite type Y synthetic zeolite, followed by elution with methyl isobutyl ketone and determination by flame atomic absorption spectrometry. Ethanol and copper interfere strongly in the determination and therefore, must be separated prior to the analysis.

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry.

Bismuth as BiCl(4)(-) and BH(4)(-) ware successively retained in a column (150mm x 4mm, length x i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin).

Pharmacokinetics of experimental pentavalent antimony after intramuscular administration in adult volunteers.

Background: Pentavalent antimony (SbV) has demonstrated therapeuticeffectiveness against clinical manifestations of leishmaniasis, an infection caused by Leishmania, a genus of flagellate protozoa comprising parasites of worldwide distribution. Approximately 1.8 million new cases are reported annually.