Influence of Heat Treatment Temperature on Microstructure, Hardness and Sensitization of UNS S32205 Duplex Stainless Steel.

Improper thermal cycles on duplex stainless steels can lead to the formation of detrimental phases or alter the proportion of ferrite and austenite phases, thus influencing the material's mechanical properties and corrosion resistance. Therefore, this study aimed to evaluate the effect of aging (at 850 and 950 °C) and solubilization (at 1000 and 1150 °C) thermal treatments on microstructure, indentation hardness, elasticity modulus, and susceptibility to intergranular corrosion of UNS S32205 duplex stainless steel. The sigma phase (σ) formation in the aged samples, with hardness values between 8 and 10 GPa, was confirmed.

Cashew Nut Shell Waste Derived Graphene Oxide.

The particular properties of graphene oxide (GO) make it a material with great technological potential, so it is of great interest to find renewable and eco-friendly sources to satisfy its future demand sustainably. Recently, agricultural waste has been identified as a potential raw material source for producing carbonaceous materials. This study explores the potential of cashew nut shell (CNS), a typically discarded by-product, as a renewable source for graphene oxide synthesis.

Microcrystalline Cellulose-A Green Alternative to Conventional Soil Stabilizers.

Biopolymers are polymers of natural origin and are environmentally friendly, carbon neutral and less energy-intense additives that can be used for various geotechnical applications. Biopolymers like xanthan gum, carrageenan, chitosan, agar, gellan gum and gelatin have shown potential for improving subgrade strength, erosion resistance, and as canal liners and in slope stabilization. But minimal research has been carried out on cellulose-based biopolymers, particularly microcrystalline cellulose (MCC), for their application in geotechnical and geo-environmental engineering.

The Corrosive Effects of Aftermarket Oil Additives on High-Leaded Tin Bronze Alloy.

Aftermarket additives are used to enhance the performance of internal combustion engines in specific aspects such as reducing wear, increasing power, and improving fuel economy. Despite their advantages, they can sometimes cause corrosion-related problems. This research evaluated the corrosiveness of four aftermarket additives on the corrosion of a high-leaded tin bronze alloy over 28 days at 80 °C in immersion tests.

Effect of Porosity/Binder Index on Strength, Stiffness and Microstructure of Cemented Clay: The Impact of Sustainable Development Geomaterials.

Searching for alternative material options to reduce the extraction of natural resources is essential for promoting a more sustainable world. This is especially relevant in construction and infrastructure projects, where significant volumes of materials are used. This paper aims to introduce three alternative materials, crushed ground glass (GG), recycled gypsum (GY) and crushed lime waste (CLW), byproducts of construction industry geomaterials, to enhance the mechanical properties of clay soil in Cartagena de Indias, Colombia.

Evaluation of Compressive and Bending Strength of a Geopolymer Based on Lateritic Clays as an Alternative Hydraulic Binder.

In Bolivia, lateritic soils are common in humid tropical regions and can be used in the construction industry as an alternative to materials that cause a negative environmental impact, such as cement. The production of Portland cement causes environmental issues like significant greenhouse gas emissions and air pollution. To address this problem, geopolymers have been introduced as an alternative binder with low CO emissions.

Analysis of Novel Porosity-Water-to-Binder Index for Prediction of Strength, Stiffness and Durability for Cemented Soils.

The initial weight and volume relationships are crucial factors in determining the strength, stiffness, and durability of cement-stabilized soils. The porosity/binder ratio has been widely used as a control parameter for stabilized soil mixtures. However, this approach does not take into consideration the water content used during the stabilization process, which can impact the strength and durability of the final product.

Strength, Stiffness, and Microstructure of Stabilized Marine Clay-Crushed Limestone Waste Blends: Insight on Characterization through Porosity-to-Cement Index.

The porosity-to-cement index (η/C) has been extensively applied to study the evolution of different types of soil stabilization. However, this index has still not been used to characterize soils cemented with crushed limestone waste (CLW). In this sense, this paper sought to analyze the applicability of the porosity-to-cement index over the unconfined compressive strength (qu) and initial stiffness at small deformations (Go) of clayey soil improved with CLW and Portland cement.

Electrochemistry Study of Bio-Based Composite Biopolymer Electrolyte-Starch/Cardol.

The environmental problems generated by pollution due to polymers of petrochemical origin have led to the search for eco-friendly alternatives such as the development of biopolymers or bio-based polymers. The aim of this work was to evaluate the electrochemical behavior of a biopolymer composite made from cassava starch and cardol extracted from cashew nut shell liquid. The biopolymers were prepared using the thermochemical method, varying the synthesis pH and the cardol amounts.