Janus-Type Immunofluorescent Probes and a Quantitative Immunoassay System.

To realize highly sensitive immunoassays, high optical density probes conjugated with antibodies for target antigens have been demanded in order to increase the visibility of antigen-antibody complex formation. We herein demonstrate the development of an immunoassay system using magnetic and fluorescent Janus particles as probes in conjunction with an antibody-immobilized microfluidic device. The concentration of the detection limit at which there was a significant difference between SARS-CoV-2 and human coronavirus 229E antigens was 3.

Complex Hydride-Based Gel Polymer Electrolytes for Rechargeable Ca-Metal Batteries.

Rechargeable Ca batteries offer the advantages of high energy density, low cost, and earth-abundant constituents, presenting a viable alternative to lithium-ion batteries. However, using polymer electrolytes in practical Ca batteries is not often reported, despite its potential to prevent leakage and preserve battery flexibility. Herein, a Ca(BH)-based gel-polymer electrolyte (GPE) is prepared from Ca(BH) and poly(tetrahydrofuran) (pTHF) and tested its performance in Ca batteries.

A Molecular Adsorption Concept for Increasing Energy Density of Hybrid Supercapacitors.

In this report, we demonstrate that high-capacity hybrid supercapacitors can be realized by utilizing iron azaphthalocyanine (FeAzPc-4N) adsorbed activated carbons (ACs) as an electrode due to the combination of the electric double layer of activated carbon surfaces and redox reactions of FeAzPc-4N molecules. By increasing the mixing ratio of FeAzPc-4N with ACs, a maximum capacity of 907 F/g is achieved, also enabling rapid charging and discharging at 20 A/g. The revelation of the capacitor electrode's durability through 20 000 cycles of charging and discharging is realized, and the capacitor cell had sufficient output power to illuminate LEDs.

Controlling the Formation of Polyhedral Block Copolymer Nanoparticles: Insights from Process Variables and Dynamic Modeling.

This study delves into the formation of nanoscale polyhedral block copolymer particles (PBCPs) exhibiting cubic, octahedral, and variant geometries. These structures represent a pioneering class that has never been fabricated previously. PBCP features distinct variations in curvature on the outer surface, aligning with the edges and corners of polyhedral shapes.

Gold Nanoparticle-Decorated Polymer Particles for High-Optical-Density Immunoassay Probes.

To realize a highly sensitive immunoassay, high-optical-density probes conjugated with antibodies for target antigens are needed to increase the detectability of antigen-antibody complex formation. In this work, gold nanoparticle (NP)-decorated polymer (GNDP) particles were successfully prepared by mixing positively charged polymer particles and negatively charged Au NPs. GNDP particles decorated with NPs of 20 nm in size had higher optical density than the original Au NPs and GNDPs decorated with smaller Au NPs.

Effect of the Poly(ethylene glycol) Diacrylate (PEGDA) Molecular Weight on Ionic Conductivities in Solvent-Free Photo-Cross-Linked Solid Polymer Electrolytes.

To obtain safe, high-performance Li-ion batteries, the development of electrolytes with high impact resistance and high ionic conductivity is important. Ionic conductivity at room temperature has been improved by using poly(ethylene glycol) (PEG) diacrylate (PEGDA) to form three-dimensional (3D) networks and solvated ionic liquids. However, the effects of the molecular weight of PEGDA on ionic conductivities and the relationship between ionic conductivities and network structures of cross-linked polymer electrolytes have not been discussed in detail.

Involvement of ionic interactions in self-assembly and resultant rodlet formation of class I hydrophobin RolA from Aspergillus oryzae.

Hydrophobins are small amphiphilic proteins that are conserved in filamentous fungi. They localized on the conidial surface to make it hydrophobic, which contributes to conidial dispersal in the air, and helps fungi to infect plants and mammals and degrade polymers. Hydrophobins self-assemble and undergo structural transition from the amorphous state to the rodlet (rod-like multimeric structure) state.

Increasing the ionic conductivity and lithium-ion transport of photo-cross-linked polymer with hexagonal arranged porous film hybrids.

High ionic conductivity, suitable mechanical strength, and electrochemical stability are the main requirements for high-performance poly(ethylene oxide)-based electrolytes. However, the low ionic conductivity owing to the crystallinity of the ethylene oxide chain that limits the discharge rate and low-temperature performance has restricted the development and commercialization of these electrolytes. Lithium electrolytes that combine high ionic conductivity with a high lithium transference number are rare and are essential for high-power batteries.

Adsorption Kinetics and Self-Assembled Structures of Aspergillus oryzae Hydrophobin RolA on Hydrophobic and Charged Solid Surfaces.

Hydrophobins are small secreted amphipathic proteins ubiquitous among filamentous fungi. Hydrophobin RolA produced by Aspergillus oryzae attaches to solid surfaces, recruits polyesterase CutL1, and thus promotes hydrolysis of polyesters. Because the N-terminal region of RolA is involved in the interaction with CutL1, the orientation of RolA on the solid surface is important.

Bifunctional rare metal-free electrocatalysts synthesized entirely from biomass resources.

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are important processes for various energy devices, including polymer electrolyte fuel cells, rechargeable metal-air batteries, and water electrolyzers. We herein report the preparation of a rare metal-free and highly efficient ORR/OER electrocatalyst by calcination of a mixture of blood meal and ascidian-derived cellulose nanofibers. The obtained carbon alloys showed high ORR/OER performances and proved to be promising electrocatalysts.

Bridging pico-to-nanonewtons with a ratiometric force probe for monitoring nanoscale polymer physics before damage.

Understanding the transmission of nanoscale forces in the pico-to-nanonewton range is important in polymer physics. While physical approaches have limitations in analyzing the local force distribution in condensed environments, chemical analysis using force probes is promising. However, there are stringent requirements for probing the local forces generated before structural damage.

Aqueous dispersion and tuning surface charges of polytetrafluoroethylene particles by bioinspired polydopamine-polyethyleneimine coating via one-step method.

We propose a surface modification of poorly dispersive polytetrafluoroethylene (PTFE) particles via bioinspired polydopamine-polyethyleneimine (PDA-PEI) which conferred PTFE particles a uniform dispersion in aqueous medium. With increasing dopamine concentration in the reaction solution, dispersity of PTFE particles improved and the surface charges of particles changed from negative to positive due to an increase of surface coverage of PDA-PEI layers. Simplicity of the method here outlines an attractive route for surface modification of inert surfaces useful for large-scale applications.

Effect of Pore Size of Honeycomb-Patterned Polymer Film on Spontaneous Formation of 2D Micronetworks by Coculture of Human Umbilical Vein Endothelial Cells and Mesenchymal Stem Cells.

The geometrical control of micronetwork structures ( NSs) formed by endothelial cells is an important topic in tissue engineering, cell-based assays, and fundamental biological studies. In this study, NSs are formed using human umbilical vein endothelial cells (HUVECs) by the coculture of HUVECs and human mesenchymal stem cells (MSCs) confined in a honeycomb-patterned poly-l-lactic acid film (honeycomb film (HCF)), which is a novel cell culture scaffold. The HCF is produced using the breath figure method, which uses condensed water droplets as pore templates.

Bio-inspired Incrustation Interfacial Polymerization of Dopamine and Cross-linking with Gelatin toward Robust, Biodegradable Three-Dimensional Hydrogels.

In nature, laccase enzymatically catalyzes the reaction of phenolic compounds with oxygen to produce hardened surfaces known as cuticles on insects and plants. Inspired by this natural process, the present work investigated a robust, biodegradable hydrogel synthesized from dopamine and gelatin. This gel is obtained by the oxidation of dopamine dissolved in water, after which the resulting quinone compound automatically undergoes self-polymerization.

COVID-19 infection and nanomedicine applications for development of vaccines and therapeutics: An overview and future perspectives based on polymersomes.

The severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), which emerged in December 2019 and caused the coronavirus disease 2019 (COVID-19) pandemic, took the world by surprise with an unprecedented public health emergency. Since this pandemic began, extraordinary efforts have been made by scientists to understand the pathogenesis of COVID-19, and to fight the infection by providing various preventive, diagnostic and treatment opportunities based on either novel hypotheses or past experiences. Despite all the achievements, COVID-19 continues to be an accelerating health threat with no specifically approved vaccine or therapy.

Site-Selective Wettability Control of Honeycomb Films by UV-O-Assisted Sol-Gel Coating.

Wettability control of porous materials is significant in lateral flow immunoassay, microfluidic systems, microdroplet manipulation, and so on. In this report, formation of metal oxide layers on self-organized polymer honeycomb films to control surface wettability by simple sol-gel coating and UV-O treatment was demonstrated. By the combination of bottom-up and top-down processes, silica thin layers can be formed by retaining their original three-dimensional honeycomb structures.

S/N Co-Doped Hollow Carbon Particles for Oxygen Reduction Electrocatalysts Prepared by Spontaneous Polymerization at Oil-Water Interfaces.

We herein report that sulfur and nitrogen co-doped hollow spherical carbon particles can be applied to oxygen reduction reaction (ORR) electrocatalysts prepared by calcination of polydopamine (PDA) hollow particles. The hollow structure of PDA was formed by auto-oxidative interfacial polymerization of dopamine at the oil and water interface of emulsion microdroplets. The PDA was used as the nitrogen source as well as a platform for sulfur-doping.

Hierarchical Nano/Micro Moth Eyelike Polymer Film Using Solid/Liquid Interfacial Reaction at Room Temperature.

A simple pathway for the fabrication of real moth eyelike patterned (MEP) polymer film with a double-layered nano/microhierarchical structure is demonstrated through a solid/liquid interfacial reaction at atmospheric conditions. A convex-structured polyvinyl alcohol (PVA) film containing CdCl was first fabricated using a self-organized honeycomb-patterned porous film as a template. The CdCl/PVA convex film was immersed into NaS/ethanol solution to facilitate the reaction between CdCl and NaS at the solid/liquid interface, which led to the functionalization of CdS nanoparticles in the convex-structured PVA film.

Underwater Bubble and Oil Repellency of Biomimetic Pincushion and Plastron-Like Honeycomb Films.

Underwater highly bubble and oil-repellent surfaces were prepared based on honeycomb- and pincushion-structured films prepared by breath figure technique and post modifications including UV-ozone treatment and peeling the top layer. Furthermore, bubble generation from the plastron-like honeycomb gas chamber by attaching oil droplet onto the surface of honeycomb films was first observed. Both controlling gas bubbles and oil droplets underwater are important issues in the field of microfluidics since they are useful and may solve the maleficence to liquid transportation in narrow microchannels.

Biomimetic catechol-based adhesive polymers for dispersion of polytetrafluoroethylene (PTFE) nanoparticles in an aqueous medium.

Biomimetic synthetic functional materials are valuable for a large number of practical applications with improved or tunable performance. In this paper, we present a series of mussel-inspired biomimetic catechol-containing copolymers synthesized from dopamine methacrylamide (DMA) and 2-(2-ethoxyethoxy)ethyl acrylate (EEA) and abbreviated as poly(PDMA-PEEA). The successfully synthesized adhesive polymers allow adhering polytetrafluoroethylene (PTFE) and were used for coating PTFE particles in organic solvent and re-dispersion in an aqueous medium.

Analysis of the self-assembly process of hydrophobin RolA by Langmuir-Blodgett method.

Hydrophobins are small, amphipathic proteins secreted by filamentous fungi. Hydrophobin RolA, which is produced by , attaches to solid surfaces, recruits the polyesterase CutL1, and consequently promotes hydrolysis of polyesters. Because this interaction requires the N-terminal, positively charged residue of RolA to be exposed on the solid surface, the orientation of RolA on the solid surface is important for recruitment.

Ashura Particles: Experimental and Theoretical Approaches for Creating Phase-Separated Structures of Ternary Blended Polymers in Three-Dimensionally Confined Spaces.

Unique morphologies were found in binary and ternary polymer blended particles, including Ashura-type phase separation, which has three different polymer components on the particle surface. The morphologies of phase-separated structures in the binary polymer blended particles are discussed in terms of the surface tensions of the blended polymers. Structural control of ternary polymer blended particles was achieved based on the combination of polymers by examining binary polymer blended particles.

Preparation of Hierarchic Porous Films of α-MnO Nanoparticles by Using the Breath Figure Technique and Application for Hybrid Capacitor Electrodes.

The honeycomb-structured film has advantages such as high wettability and high surface area. This structure and properties are suitable for the capacitor electrode. In this study, the electrode structure is controlled by the synthesis of MnO nanoparticles using the breath figure method.

Self-assembled microrings of Au nanoparticle and Au nanorod clusters formed at the equators of Janus particles.

A method for fabricating polymer Janus particles with microring structures at their equators has been developed. This method allows gold nanoparticles and nanorods to be aligned and densely packed along the microrings.