Near-infrared long-range surface plasmon resonance in a D-shaped honeycomb microstructured optical fiber coated with Au film.

Long-range surface plasmon resonances (LRSPRs) are featured with longer propagation and deeper penetration, compared with conventional surface plasmon resonances (SPRs). Thus, LRSPR-based fiber sensors are considered to have great potential for highly sensitive detection in chemistry or biomedicine areas. Here, we propose and demonstrate a near-infrared LRSPR sensor based on a D-shaped honeycomb microstructured optical fiber (MOF) directly coated with gold film.

Bragg Grating Assisted Sagnac Interferometer in SiO-AlO-LaO Polarization-Maintaining Fiber for Strain-Temperature Discrimination.

Polarization-maintaining fibers (PMFs) have always received great attention in fiber optic communication systems and components which are sensitive to polarization. Moreover, they are widely applied for high-accuracy detection and sensing devices, such as fiber gyroscope, electric/magnetic sensors, multi-parameter sensors, and so on. Here, we demonstrated the combination of a fiber Bragg grating (FBG) and Sagnac interference in the same section of a new type of PANDA-structure PMF for the simultaneous measurement of axial strain and temperature.

Directional torsion and temperature discrimination based on a multicore fiber with a helical structure.

We propose and experimentally demonstrate a directional torsion sensor based on a Mach-Zehnder interferometer formed in a multicore fiber (MCF) with a ~570-μm-long helical structure (HS). The HS was fabricated into the MCF by simply pre-twisting and then heating with a CO laser splicing system. This device shows the capability of directional torsion measurement from -17.

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber.

Optical fiber sensors for strain measurement have been playing important roles in structural health monitoring for buildings, tunnels, pipelines, aircrafts, and so on. A highly sensitive strain sensor based on helical structures (HSs) assisted Mach-Zehnder interference in an all-solid heterogeneous multicore fiber (MCF) is proposed and experimentally demonstrated. Due to the HSs, a maximum strain sensitivity as high as -61.

Supermode Bragg grating combined Mach-Zehnder interferometer for temperature-strain discrimination.

We report on a compact sensor by integrating a Mach-Zehnder interference and a cladding Bragg grating in a same section of all-solid photonic bandgap fiber. Theoretical investigation reveals that the Bragg grating resonance stems from the coupling of counter-propagating cladding LP01-like supermodes and the Mach-Zehnder interference works between a LP01-like supermode and LP01 core mode. Compared with the interference fringe, such supermode grating dip responses to axial strain in a more sensitive and opposite-direction manner.

Temperature- and strain-insensitive curvature sensor based on ring-core modes in dual-concentric-core fiber.

We report on a high-performance curvature sensor based on a long-period grating (LPG) in a dual-concentric-core fiber (DCCF). The LPG is inscribed to couple light from the fundamental mode of the central core to the ring-core modes, resulting in the generation of a series of resonant dips. Two adjacent dips shift toward each other when the LPG is bent.

Thin-section computed tomography detects long-term pulmonary sequelae 3 years after novel influenza A virus-associated pneumonia.

Background: The aim of this research was to evaluate long-term pulmonary sequelae on paired inspiration-expiration thin-section computed tomography (CT) scans 3 years after influenza A (H1N1) virus-associated pneumonia, and to analyze the affecting factors on pulmonary fibrosis.

Methods: Twenty-four patients hospitalized with H1N1 virus-associated pneumonia at our hospital between September 2009 and January 2010 were included. The patients underwent thin-section CT 3 years after recovery.

All-fiber multiwavelength thulium-doped laser assisted by four-wave mixing in highly germania-doped fiber.

An all-fiber multiwavelength Tm-doped laser assisted by four-wave mixing (FWM) in highly Germania-doped highly nonlinear fiber (HG-HNLF) has been experimentally demonstrated. Benefiting from the high nonlinearity of the HG-HNLF, intensity-dependent gain caused by FWM is introduced into the laser cavity to mitigate the gain competition in Tm-doped fiber. Thanks to a 50-m HG-HNLF, 9, 22, and 36 lasing lines with considering 10-dB, 20-dB, and 30-dB bandwidth, respectively is obtained at room temperature with wavelength spacing of 0.

Study on the crucial conditions for efficient third harmonic generation using a metal-hybrid-metal plasmonic slot waveguide.

We provide a comprehensive study on the efficient third harmonic generation (THG) in a lossy metal-hybrid-metal asymmetric plasmonic slot waveguide (MHM) to develop a method for efficient THG by focusing on the modal phase-matching condition (PMC), the third-order nonlinear susceptibility of the nonlinear interactive material, and the pump-harmonic modal overlap in conjunction with reasonable linear propagation loss. In addition to the PMC and the nonlinear material, the stimulated THG process can be greatly enhanced by the large pump-harmonic modal overlap. With 1 W pump power, simulation results present that THG conversion efficiency up to 2.

Coupling-length phase matching for efficient third-harmonic generation based on parallel-coupled waveguides.

We study third-harmonic generation (THG) in parallel-coupled waveguides where the spatial modulation of the mode intensity provides quasi-phase matching, called coupling-length phase matching (CLPM), for efficient nonlinear frequency conversion. Different types of CLPM are investigated for THG, and it is found that two sets of CLPM conditions can be practically implemented with traditional waveguides. These two CLPM conditions are further investigated by considering nonlinear phase modulations, which can degrade the CLPM-based THG conversion.

Third harmonic generation from mid-IR to near-IR regions in a phase-matched silicon-silicon-nanocrystal hybrid plasmonic waveguide.

The conversion efficiency of third harmonic generation (THG) from mid-IR (3600 nm) to near-IR (1200 nm) regions in a silicon-silicon-nanocrystal hybrid plasmonic waveguide (SSHPW) was calculated. The required modal phase-matching condition (PMC) between the 0-th mode at fundamental wave (FW) and the 2-nd mode at third harmonic (TH) is achieved by carefully designing the waveguide geometry. Benefiting from the hybridized surface plasmon polariton (SPP) nature of the two guided modes, the SSHPW is capable of achieving both high THG nonlinear coefficient |I₆| and reasonable linear propagation loss, thereby resulting in large figure-of-merits (FOMs) for both FW and TH.

Efficient phase-matched third harmonic generation in an asymmetric plasmonic slot waveguide.

An asymmetric plasmonic slot waveguide (APSW) for efficient phase-matched third harmonic generation (THG) is proposed and demonstrated theoretically. Nonlinear organic material DDMEBT polymer is integrated into the bottom of the metallic slot, while silicon is used to fill the top of the slot. We introduce the rigorous coupled-mode equations of THG in the lossy APSW and apply them to optimize the waveguide geometry.

Efficient one-third harmonic generation in highly Germania-doped fibers enhanced by pump attenuation.

We provide a comprehensive study on one-third harmonic generation (OTHG) in highly Germania-doped fiber (HGDF) by analyzing the phase matching conditions for the step index-profile and optimizing the design parameters. For stimulated OTHG in HGDF, the process can be enhanced by fiber attenuation at the pump wavelength which dynamically compensates the accumulated phase-mismatch along the fiber. With 500 W pump and 35 W seed power, simulation results show that a 31% conversion efficiency, which is 4 times higher than the lossless OTHG process, can be achieved in 34 m of HGDF with 90 mol.

Simultaneous measurement of curvature and strain based on fiber Bragg grating in two-dimensional waveguide array fiber.

We report on the fabrication of a fiber Bragg grating (FBG) with multiple resonances in a two-dimensional waveguide array microstructured optical fiber containing 91 cores. Theoretical investigation reveals that these resonances originate from the identical and nonidentical mode couplings between forward-propagating and backward-propagating LP-like (m=1, 2, 3; LP refers to linearly polarized) supermodes. Since both the central wavelength and minimum transmission of these resonant dips respond differently to curvature and axial strain, this FBG can be applied in the simultaneous measurement of curvature and axial strain.

Maximum likelihood sequence detection in laser phase noise-impaired coherent optical systems.

A maximum likelihood sequence detection (MLSD) receiver is used to detect data sequences in single-carrier coherent optical systems in the presence of laser phase noise. It requires no explicit phase estimation and involves only linear operations. It consistently shows improvement in the OSNR penalty (e.

[Severe pneumonia caused by Aeromonas veronii biovar sobria: a case report and review of the literature].

Objective: To describe the clinical features of severe pneumonitis with Aeromonas veronii biovar sobria.

Method: Case report and review of the related literatures. The clinical symptoms, laboratory tests, radiographic patterns, diagnosis, and therapeutic management of a case of severe pneumonia caused by A.