Flexible sensors are widely applied in the fields of electronic skins and wearable devices, yet it is still a big challenge to effectively prolong the lifespan of the damaged sensors and reduce environmental pollution caused by discarded sensors after updating and upgrading. Herein, we proposed a self-healing, degradable, and biobased polyurethane elastomer for high-performance flexible pressure sensors. The elastomer synthesized using fatty diamine as a chain extender possessed a high tensile strength of 13.
View Article and Find Full Text PDFLithium (Li) metal batteries (LMBs) are promising for high-energy-density rechargeable batteries. However, Li dendrites formed by the reaction between highly active Li and non-aqueous electrolytes lead to safety concerns and rapid capacity decay. Developing a reliable solid-electrolyte interphase is critical for realizing high-rate and long-life LMBs, but remains technically challenging.
View Article and Find Full Text PDFCarbohydr Polym
September 2023
Multifunctional biomass-based aerogels with mechanically robust and high fire safety are urgently needed for the development of environmentally-friendly intelligent fire fighting but challenging. Herein, a novel polymethylsilsesquioxane (PMSQ)/cellulose/MXene composite aerogel (PCM) with superior comprehensive performance was fabricated by ice-induced assembly and in-situ mineralization. It exhibited light weight (16.
View Article and Find Full Text PDFWith the rapid development of flexible electronics and the increasing deterioration of the natural environment, functional and environmentally friendly flexible strain sensors have become one of the frontier research hotspots. Here, we propose a novel strategy to synthesize a functional epoxy elastomer integrating self-healing capability and degradability for flexible stretchable strain sensors. A carboxyl-terminated epoxy prepolymer was first synthesized using carboxyl-terminated PEG (PEG-COOH), 2,2'-dithiodibenzoic acid (DTSA), and 1,4-butanediol diglycidyl ether (BDDE), and then crosslinked by epoxidized soybean oil (ESO) to yield an epoxy elastomer.
View Article and Find Full Text PDFJ Colloid Interface Sci
November 2022
In recent years, flexible strain sensors have attracted considerable attention for the great application potential in the emerging fields of wearable devices, electronic skin and health monitoring. However, most of flexible strain sensors are nondegradable, and the produced numerous electronic wastes after uselessness will seriously threaten environment and ecology. Herein, we propose a new strategy to fabricate degradable and stretchable bio-based strain sensor using candle soot (CS) particles to construct conductive pathways and chitosan, potato starch (PS), and polyvinyl alcohol (PVA) to form stretchable matrix in the presence of Fe ions.
View Article and Find Full Text PDFFlexible piezoresistive pressure sensors may exhibit excellent sensing performances to be applied in wearable electronics, medical diagnosis, and electronic skin. Herein, we report a multi-layer and phased-responsive reduced graphene oxide/MXene-based piezoresistive pressure sensor with hierarchical microspines constructed by sandpaper as the template. Thanks to the multi-level and multi-layer structure, the obtained sensor realized phased response and showed wide detection range (up to 70 kPa), fast response (response/recovery time of 40/80 ms), and excellent working stability (1000 fatigue cycles).
View Article and Find Full Text PDFIn recent years, flexible high-performance piezoresistive pressure sensors have attracted considerable attention for the important application potential in the emerging fields of smart robots, wearable electronics and electronic skin. Herein, inspired by human skin, a new strategy was proposed for the fabrication of a double-layer piezoresistive pressure sensor with wide sensing range and high sensitivity. It was based on the utilization of sandpaper as template and MXene for the constructions of micro-protrusion rough surface on polydimethylsiloxane film and electrically conductive pathways, respectively.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2021
Fabrication of superhydrophobic films with large and sensitive deformed actuations driven by light stimuli for the emerging application fields such as biomimetic devices, artificial muscles, soft robotics, electric switches, and water-droplet manipulation remains challenging. Herein, a facile strategy is proposed to fabricate a light stimuli-responsive superhydrophobic film (LSSF) by integrating a bottom carbon nanotube/poly(vinylidene fluoride) (CNT/PVDF) layer, a middle chitosan (CS) layer, and a top superhydrophobic fumed silica-chitosan (SiO/CS) layer modified with 1,1,2,2-heptafluorodecyltrimethoxysilane (FAS). Under near-infrared (NIR) light irradiation, the LSSF quickly bent toward the CS layer with a large bending angle (>200°), high sensitivity (∼7 °C change), and great repeatability (>1000 cycles), which was attributed to the significant difference in the coefficient of thermal expansion (CTE) between CS and PVDF and the water desorption-induced volume shrinking in the CS layer.
View Article and Find Full Text PDFJ Colloid Interface Sci
November 2021
Temperature sensing enables flammable materials to respond intelligently at high temperature, which is conducive to further improving their fire safety. However, it is still challenging to develop a smart nanocoating with sensitive temperature-sensing and efficient flame retardancy. Inspired by human skin, a thermoelectric flame retardant (TE-FR) nanocoating was fabricated by combining a dermis-mimicking thermoelectric (TE) layer and an epidermis-mimicking flame retardant (FR) layer.
View Article and Find Full Text PDFACS Appl Mater Interfaces
May 2021
Multifunctional intelligent fireproof cotton fabrics are urgently demanded in the era of the Internet of Things. Herein, a novel high fire safety cotton fabric (denoted as MXene/CCS@CF) with temperature sensing, fire-warning, piezoresistivity, and Joule heating performance was developed by coating MXene nanosheet and carboxymethyl chitosan (CCS) via an eco-friendly layer-by-layer assembly method. Benefiting from the thermoelectric characteristic and high conductivity of MXene nanosheet, MXene/CCS@CF exhibited accurate wide-range temperature sensing performance.
View Article and Find Full Text PDFA lot of attention has recently been focused on wearable strain sensors because of their promising applications in the rising areas of human motion detection, health monitoring, and smart human-machine interaction. However, the design and fabrication of self-healable strain sensors with superior overall properties including stretchability, sensitivity, response ability, stability, and durability is still a huge challenge. Herein, we report an innovative self-healable strain sensor with exceptional overall performance constructed with three-dimensional binary-conductive-network silver nanowire-coated thiolated graphene foam (AgNWs@TGF) and room-temperature self-healing functionalized polyurethane (FPU) elastomer.
View Article and Find Full Text PDFHighly stretchable and self-healable elastomers are attractive for a variety of applications in the fields of electrical skin and wearable devices. Herein, we proposed a simple one-pot two-step approach to synthesize room-temperature self-healable polydimethylsiloxane (PDMS) elastomers. Excess aminopropyl terminated polydimethylsiloxane was firstly reacted with isophorone diisocyanate to synthesize amino-terminated PDMS with incorporated ureido groups, followed by further reaction with terephthalaldehyde as chain extender to yield self-healing PDMS elastomers.
View Article and Find Full Text PDFFlexible strain or pressure sensors have potential applications in electronic skin, healthcare, etc. It remains a challenge to explore multifunctional strain or pressure sensors that possess excellent water repellent and heating performance and hence can be used in harsh environments such as high moisture and low-temperature conditions. Here, a self-derived superhydrophobic and multifunctional polymer composite foam is prepared by adsorption of the Ag precursor in tetrahydrofuran (THF) onto the rubber sponge followed by reduction of Ag to Ag nanoparticles (AgNPs).
View Article and Find Full Text PDFACS Appl Mater Interfaces
March 2020
Thermochromic films with intriguing functionalities have great potential in soft actuators, heat storage devices, and interactive interface sensors. Inspired by the unique features of bird feathers (such as Nicobar pigeon, Anna hummingbird, mandarin duck, etc.), a superhydrophobic thermochromic film (STF) with robust healability is proposed for the first time through sandwiching an electric heater between a top thermochromic layer and a bottom poly(vinylidene fluoride--hexafluoropropylene) (PVDF-HFP) substrate.
View Article and Find Full Text PDFHumidity and chemical vapor sensors have promising applications in the field of environment protection, human healthcare, and so forth. It is still challenging to develop sensor materials that can serve as both humidity and chemical vapor sensors with high sensitivity, low detection limit, and excellent stretchability, repeatability, and reliability. In this study, a flexible, stretchable, and conductive nanofiber composite (CNC) with superhydrophilicity and underwater superoleophobicity is prepared by acidified carbon nanotube (ACNT) decoration onto the thermoplastic polyurethane (PU) nanofiber surface.
View Article and Find Full Text PDFFree radicals play a negative role during the thermal degradation of silicone rubber (SR). Quenching free radicals is proposed to be an efficient way to improve the thermal-oxidative stability of SR. In this work, a novel zirconium-containing polyhedral oligometallasilsesquioxane (Zr-POSS) with free-radical quenching capability was synthesized and characterized.
View Article and Find Full Text PDFDeveloping a high efficient, environmental-friendly and universal fire-safe strategy for combustible polymers is crucial but challengeable. Inspired by nacre, we developed a super-efficiently fire-safe nanocoating based on carboxymethyl chitosan (CCS) and modified montmorillonite (MMT) via one-step self-assembly. The nanocoating possessed well-arranged nacre-like hierarchical microstructure, exhibiting high transparency and specific nacre-like iridescence.
View Article and Find Full Text PDFACS Appl Mater Interfaces
December 2018
In the past several years, wearable pressure sensors have engendered a new surge of interest worldwide because of their important applications in the areas of health monitoring, electronic skin, and smart robots. However, it has been a great challenge to simultaneously achieve a wide pressure-sensing range and high sensitivity for the sensors until now. Herein, we proposed an innovative strategy to construct multilayer-structure piezoresistive pressure sensors with an in situ generated thiolated graphene@polyester (GSH@PET) fabric via the one-pot method.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2019
Waterproof and flame-retardant fabrics are widely utilized in many fields, such as automotive interiors, indoor decorations, outdoor clothing and tents. Herein, a facile one-pot sol-gel approach was developed to construct superhydrophobic and flame-retardant (SFR) coatings on cotton fabrics. The cotton fabric was activated by O plasma and then immersed into the ethanol suspension containing tetraethoxysilane (TEOS), hydroxyl-terminated polydimethylsiloxane (HPDMS) and ammonium polyphosphate (APP).
View Article and Find Full Text PDFACS Appl Mater Interfaces
March 2018
Superhydrophobic materials integrating stretchability with conductivity have huge potential in the emerging application horizons such as wearable electronic sensors, flexible power storage apparatus, and corrosion-resistant circuits. Herein, a facile spraying method is reported to fabricate a durable superhydrophobic coating with excellent stretchable and electrical performance by combing 1-octadecanethiol-modified silver nanoparticles (M-AgNPs) with polystyrene- b-poly(ethylene- co-butylene)- b-polystyrene (SEBS) on a prestretched natural rubber (NR) substrate. The embedding of M-AgNPs in elastic SEBS matrix and relaxation of prestretched NR substrate construct hierarchical rough architecture and endow the coating with dense charge-transport pathways.
View Article and Find Full Text PDFSuperhydrophobic surfaces with tunable adhesion from lotus-leaf to rose-petal states have generated much attention for their potential applications in self-cleaning, anti-icing, oil-water separation, microdroplet transportation, and microfluidic devices. Herein we report a facile magnetic-field-manipulation strategy to fabricate dual-functional superhydrophobic textiles with asymmetric roll-down/pinned states on the two surfaces of the textile simultaneously. Upon exposure to a static magnetic field, fluoroalkylsilane-modified iron oxide (F-FeO) nanoparticles in polydimethylsiloxane (PDMS) moved along the magnetic field to construct discrepant hierarchical structures and roughnesses on the two sides of the textile.
View Article and Find Full Text PDFHow to effectively enhance the antitracking performance of silicone rubber is a huge challenge in the field of high-voltage insulation. In this contribution, amine-containing MQ silicone resin (A-MQ) was prepared to enhance the tracking and erosion resistance of addition-cure liquid silicone rubber (ALSR). The results showed that A-MQ imparted ALSR with excellent tracking and erosion resistance.
View Article and Find Full Text PDFLarge-scale fabrication of superhydrophobic surfaces with excellent durability by simple techniques has been of considerable interest for its urgent practical application in oil-water separation in recent years. Herein, we proposed a facile vapor-liquid sol-gel approach to fabricating highly durable and robust superhydrophobic polydimethylsiloxane@silica surfaces on the cross-structure polyester textiles. Scanning electron microscopy and Fourier transform infrared spectroscopy demonstrated that the silica generated from the hydrolysis-condensation of tetraethyl orthosilicate (TEOS) gradually aggregated at microscale driven by the extreme nonpolar dihydroxyl-terminated polydimethylsiloxane (PDMS(OH)).
View Article and Find Full Text PDFFunctional surfaces for reversibly switchable wettability and oil-water separation have attracted much interest with pushing forward an immense influence on fundamental research and industrial application in recent years. This article proposed a facile method to fabricate superhydrophobic surfaces on steel substrates via electroless replacement deposition of copper sulfate (CuSO) and UV curing of vinyl-terminated polydimethylsiloxane (PDMS). PDMS-based superhydrophobic surfaces exhibited water contact angle (WCA) close to 160° and water sliding angle (WSA) lower than 5°, preserving outstanding chemical stability that maintained superhydrophobicity immersing in different aqueous solutions with pH values from 1 to 13 for 12 h.
View Article and Find Full Text PDFHow to effectively improve the tracking and erosion resistance of silicone rubber (SR) was an urgent topic in the field of high-voltage insulation. In this work, the tracking and erosion resistance of SR was significantly improved by incorporating platinum (Pt) catalyst and nitrogen-containing silane (NS). The suppression effect and mechanism of Pt/NS on tracking and erosion were studied by inclined plane (IP) test, thermogravimetry (TG), thermogravimetry-Fourier transform infrared spectrometry, laser Raman spectroscopy, and scanning electron microscopy.
View Article and Find Full Text PDF