Cellulose-Encapsulated Composite Electrolyte Design: Toward Chemically and Mechanically Enhanced Solid-Sodium Batteries.

Sulfide- and halide-based ceramic ionic conductors exhibit comparable ionic conductivity with liquid electrolytes and are candidates for high-energy- and high-power-density all-solid-state batteries. These materials, however, are inherently brittle, making them unfavorable for applications. Here, we report a mechanically enhanced composite Na conductor that contains 92.

Self-repairing interphase reconstructed in each cycle for highly reversible aqueous zinc batteries.

Aqueous zinc (Zn) chemistry features intrinsic safety, but suffers from severe irreversibility, as exemplified by low Coulombic efficiency, sustained water consumption and dendrite growth, which hampers practical applications of rechargeable Zn batteries. Herein, we report a highly reversible aqueous Zn battery in which the graphitic carbon nitride quantum dots additive serves as fast colloid ion carriers and assists the construction of a dynamic & self-repairing protective interphase. This real-time assembled interphase enables an ion-sieving effect and is found actively regenerate in each battery cycle, in effect endowing the system with single Zn conduction and constant conformal integrality, executing timely adaption of Zn deposition, thus retaining sustainable long-term protective effect.

X-Ray Spectromicroscopy Investigation of Heterogeneous Sodiation in Hard Carbon Nanosheets with Vertically Oriented (002) Planes.

Hard carbon (HC) is a promising anode material for sodium-ion batteries, but the performance remains unsatisfactory and the sodiation mechanism in HC is one of the most debated topics. Here, from self-assembled cellulose nanocrystal sheets with crystallographic texture, unique HC nanosheets with vertically oriented (002) planes are fabricated and used as a model HC to investigate the sodiation mechanisms using synchrotron scanning transmission X-ray microscopy (STXM) coupled with analytical transmission electron microscopy (TEM). The model HC simplifies the 3D sodiation in a typical HC particle into a 2D sodiation, which facilitates the visualization of phase transformation at different states of charge.

Coupling In Situ TEM and Ex Situ Analysis to Understand Heterogeneous Sodiation of Antimony.

We employed an in situ electrochemical cell in the transmission electron microscope (TEM) together with ex situ time-of-flight, secondary-ion mass spectrometry (TOF-SIMS) depth profiling, and FIB-helium ion scanning microscope (HIM) imaging to detail the structural and compositional changes associated with Na/Na(+) charging/discharging of 50 and 100 nm thin films of Sb. TOF-SIMS on a partially sodiated 100 nm Sb film gives a Na signal that progressively decreases toward the current collector, indicating that sodiation does not proceed uniformly. This heterogeneity will lead to local volumetric expansion gradients that would in turn serve as a major source of intrinsic stress in the microstructure.

Titanium oxynitride interlayer to influence oxygen reduction reaction activity and corrosion stability of Pt and Pt-Ni alloy.

A key advancement target for oxygen reduction reaction catalysts is to simultaneously improve both the electrochemical activity and durability. To this end, the efficacy of a new highly conductive support that comprises of a 0.5 nm titanium oxynitride film coated by atomic layer deposition onto an array of carbon nanotubes has been investigated.

Hybrid device employing three-dimensional arrays of MnO in carbon nanosheets bridges battery-supercapacitor divide.

It is a challenge to meld the energy of secondary batteries with the power of supercapacitors. Herein, we created electrodes finely tuned for this purpose, consisting of a monolayer of MnO nanocrystallites mechanically anchored by pore-surface terminations of 3D arrays of graphene-like carbon nanosheets ("3D-MnO/CNS"). The biomass-derived carbon nanosheets should offer a synthesis cost advantage over comparably performing designer nanocarbons, such as graphene or carbon nanotubes.

Carbon nanosheet frameworks derived from peat moss as high performance sodium ion battery anodes.

We demonstrate that peat moss, a wild plant that covers 3% of the earth's surface, serves as an ideal precursor to create sodium ion battery (NIB) anodes with some of the most attractive electrochemical properties ever reported for carbonaceous materials. By inheriting the unique cellular structure of peat moss leaves, the resultant materials are composed of three-dimensional macroporous interconnected networks of carbon nanosheets (as thin as 60 nm). The peat moss tissue is highly cross-linked, being rich in lignin and hemicellulose, suppressing the nucleation of equilibrium graphite even at 1100 °C.

Thermodynamically destabilized hydride formation in "bulk" Mg-AlTi multilayers for hydrogen storage.

Thermodynamic destabilization of MgH2 formation through interfacial interactions in free-standing Mg-AlTi multilayers of overall "bulk" (0.5 μm) dimensions with a hydrogen capacity of up to 5.5 wt% is demonstrated.

Interconnected carbon nanosheets derived from hemp for ultrafast supercapacitors with high energy.

We created unique interconnected partially graphitic carbon nanosheets (10-30 nm in thickness) with high specific surface area (up to 2287 m(2) g(-1)), significant volume fraction of mesoporosity (up to 58%), and good electrical conductivity (211-226 S m(-1)) from hemp bast fiber. The nanosheets are ideally suited for low (down to 0 °C) through high (100 °C) temperature ionic-liquid-based supercapacitor applications: At 0 °C and a current density of 10 A g(-1), the electrode maintains a remarkable capacitance of 106 F g(-1). At 20, 60, and 100 °C and an extreme current density of 100 A g(-1), there is excellent capacitance retention (72-92%) with the specific capacitances being 113, 144, and 142 F g(-1), respectively.

Electrochemical Supercapacitor Electrodes from Sponge-like Graphene Nanoarchitectures with Ultrahigh Power Density.

We employed a microwave synthesis process of cobalt phthalocyanine molecules templated by acid-functionalized multiwalled carbon nanotubes to create three-dimensional sponge-like graphene nanoarchitectures suited for ionic liquid-based electrochemical capacitor electrodes that operate at very high scan rates. The sequential "bottom-up" molecular synthesis and subsequent carbonization process took less than 20 min to complete. The 3D nanoarchitectures are able to deliver an energy density of 7.

Body centered cubic magnesium niobium hydride with facile room temperature absorption and four weight percent reversible capacity.

We have synthesized a new metastable metal hydride with promising hydrogen storage properties. Body centered cubic (bcc) magnesium niobium hydride (Mg(0.75)Nb(0.

Herbal compound 861 regulates mRNA expression of collagen synthesis- and degradation-related genes in human hepatic stellate cells.

Aim: To identify the role of herbal compound 861 (Cpd 861) in the regulation of mRNA expression of collagen synthesis- and degradation-related genes in human hepatic stellate cells (HSCs).

Methods: mRNA levels of collagen types I and III, matrix metalloproteinase 1 (MMP-1), matrix metalloproteinase 2 (MMP-2), membrane type-1 matrix metalloproteinase (MT1-MMP), tissue inhibitor of metalloproteinase 1 (TIMP-1), and transforming growth factor beta1 (TGF-beta1) in cultured-activated HSCs treated with Cpd 861 or interferon-gamma (IFN-gamma) were determined by real-time PCR.

Results: Both Cpd 861 and IFN-gamma reduced the mRNA levels of collagen type III, MMP-2 and TGF-beta1.

Identification of two herbal compounds with potential cholesterol-lowering activity.

Low-density lipoprotein receptor (LDLR) plays a pivotal role in the control of plasma LDL-cholesterol level. This occurs predominantly at the transcriptional level through two gene regulation elements, named SRE: sterol-responsive element and SIRE: sterol-independent responsive element. We have developed a high-throughput screening using LDLR promoter activation-based assay to search for cholesterol-lowering compounds from a Chinese herb-based natural compound library.

Identification of human dopamine receptors agonists from Chinese herbs.

Aim: To find human dopamine receptors, especially D1-like receptor specific agonists from Chinese herbs as potential antihypertension drug leads.

Methods: Two D1-like receptor cell lines carrying a beta-lactamase reporter gene, and a D2 receptor cell line coexpressing a promiscuous G protein G15 were constructed using HEK293 cells. A natural compound library made from fractionated samples of herbal extracts was used for high-throughput screening (HTS) against one of the cell lines, HEK/D5R/CRE-blax.

[Identification of antiviral activity of Toddalia asiatica against influenza type A virus].

Objective: To identify antiviral activity of Toddalia asiatica against influenza virus type A in vitro.

Method: More than two hundred Chinese medicinal herb extracts were screened for antiviral activities against influenza A/PR/8/34 (H1N1) virus using 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay for virus induced cytopathic effect (CPE) in a primary screening. Positive samples were picked up and were subjected to quantitative real-time polymerase chain reaction (PCR) to quantify reduction of H1N1 virus genomic RNA.

Integration of G-protein coupled receptor signaling pathways for activation of a transcription factor (EGR-3).

We recently reported the use of a gene-trapping approach to isolate cell clones in which a reporter gene had integrated into genes modulated by T-cell activation. We have now tested a panel of clones from that report and identified the one that responds to a variety of G-protein coupled receptors (GPCR). The beta-lactamase tagged EGR-3 Jurkat cell was used to dissect specific GPCR signaling in vivo.

The structure analysis and antigenicity study of the N protein of SARS-CoV.

The Coronaviridae family is characterized by a nucleocapsid that is composed of the genome RNA molecule in combination with the nucleoprotein (N protein) within a virion. The most striking physiochemical feature of the N protein of SARS-CoV is that it is a typical basic protein with a high predicted pI and high hydrophilicity, which is consistent with its function of binding to the ribophosphate backbone of the RNA molecule. The predicted high extent of phosphorylation of the N protein on multiple candidate phosphorylation sites demonstrates that it would be related to important functions, such as RNA-binding and localization to the nucleolus of host cells.

A genome sequence of novel SARS-CoV isolates: the genotype, GD-Ins29, leads to a hypothesis of viral transmission in South China.

We report a complete genomic sequence of rare isolates (minor genotype) of the SARS-CoV from SARS patients in Guangdong, China, where the first few cases emerged. The most striking discovery from the isolate is an extra 29-nucleotide sequence located at the nucleotide positions between 27,863 and 27,864 (referred to the complete sequence of BJ01) within an overlapped region composed of BGI-PUP5 (BGI-postulated uncharacterized protein 5) and BGI-PUP6 upstream of the N (nucleocapsid) protein. The discovery of this minor genotype, GD-Ins29, suggests a significant genetic event and differentiates it from the previously reported genotype, the dominant form among all sequenced SARS-CoV isolates.

Effects of herbal compound 861 on human hepatic stellate cell proliferation and activation.

Aim: To investigate the effects of herbal compound 861 (Cpd 861) on cell proliferation in human hepatic stellate cells (LX-2) and human hepatocellular liver carcinoma cells (HepG2), and expression of alpha-smooth muscle actin (alpha-SMA) in LX-2 cells.

Methods: LX-2 and HepG2 cells were incubated with various concentrations of Cpd 861 (0.1-0.