Efficiency and mechanism of C-functionalized magnetic nanoparticles for extracting weakly polar pesticides from human serum determined by UHPLC-QTOF-MS and molecular dynamics simulations.

Detecting pesticide residues in human serum is a challenging process due to trace-level chronic exposure. Several methods using magnetic adsorbents have been developed for analyzing pesticide residue levels in human serum, but it is still difficult to achieve lower quantitative levels, and the adsorption mechanism for extracting pesticides is unclear. Herein, we propose a feasibility concept of using C-functionalized magnetic nanoparticles for the adsorption of target pesticides, focusing on the extensively used weakly polar pesticides based on molecular dynamics (MD) simulations.

Spermiogenesis toxicity of imidacloprid in rats, possible role of CYP3A4.

This study evaluated the adverse effects of low-dose imidacloprid (IMI) on the characteristics of sperm from male Wistar rats. Thirty mature male rats were equally divided into three groups and orally administered vehicle (Control Group), acceptable daily intake (ADI) concentration of IMI (Group 1), and IMI at a dose 10-fold that of the ADI (Group 2) for 90 days. The findings revealed that IMI caused abnormalities in sperm concentrations and morphologies, accompanied by an imbalance of the gonadal hormone testosterone.

Salt-assisted acetonitrile extraction and HPLC-QTOF-MS/MS detection for residues of multiple classes of pesticides in human serum samples.

Detecting pesticide residues in human serum is a challenging process. In this study we developed and validated a method for the extraction and recovery of residues of multiple classes of pesticides from serum using one reagent. Salt-assisted acetonitrile extraction and high-performance liquid chromatography with quadrupole time of flight tandem mass spectrometry were used to quantitate 34 pesticides classified in nine groups of chemicals in human serum samples, which are frequently detected in food.

Platelet-derived growth factor subunit B is required for tendon-bone healing using bone marrow-derived mesenchymal stem cells after rotator cuff repair in rats.

As a common cause of shoulder pain and disability, rotator cuff injury (RCI) represents a debilitating condition affecting an individual's quality of life. Although surgical repair has been shown to be somewhat effective, many patients may still suffer from reduced shoulder function. The aim of the current study was to identify a more effective mode of RCI treatment by investigating the effect of platelet-derived growth factor subunit B (PDGF-B) on tendon-bone healing after RCI repair by modifying bone marrow-derived mesenchymal stem cells (BMSCs).

Identification of Biological Targets of Therapeutic Intervention for Hepatocellular Carcinoma by Integrated Bioinformatical Analysis.

BACKGROUND We screened the potential molecular targets and investigated the molecular mechanisms of hepatocellular carcinoma (HCC). MATERIAL AND METHODS Microarray data of GSE47786, including the 40 μM berberine-treated HepG2 human hepatoma cell line and 0.08% DMSO-treated as control cells samples, was downloaded from the GEO database.

A novel chondroitin sulfate decorated nano platinum for the treatment of osteoarthritis.

The present work showed the biofabrication of platinum nanoparticles (PtNPs) using chondroitin sulfate via a facile, eco-friendly route by just heating leaf extract and HPtCl·6HO (Chloroplatinic acid) solution which gave a brown-colored PtNPs dispersion. The assynthesized PtNPs were analyzed by using Transmission electron microscopy (TEM), Energy dispersive spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and Selected area electron diffraction (SAED). TEM analysis showed PtNPs of irregular shape with a size existed in the range from 3 to 5nm.

A study on the system of nonaqueous microchip electrophoresis with on-line peroxyoxalate chemiluminescence detection.

This article describes a further development of our previously reported miniaturized analysis system of microchip electrophoresis with on-line chemiluminescence detection. The system, developed first time for nonaqueous microchip electrophoresis with peroxyoxalate chemiluminescence detection, consists of a suction pressure device for sample or reagent introduction, a constant voltage supplied for electrophoretic separation, an either hydrophilic or hydrophobic porous polymer plug for preventing chemiluminescence reagent flowing upstream and a spiral detection channel for enhancement of both detection sensitivity and reproducibility. Especially, by using organic solvent as BGE medium, the developed system avoided the interface problem between aqueous running buffer and low-water-content chemiluminescence solvent in previous reports.

Continuous cell introduction and rapid dynamic lysis for high-throughput single-cell analysis on microfludic chips with hydrodynamic focusing.

A chip-based microfluidic system for high-throughput single-cell analysis is described. The system was integrated with continuous introduction of individual cells, rapid dynamic lysis, capillary electrophoretic (CE) separation and laser induced fluorescence (LIF) detection. A cross microfluidic chip with one sheath-flow channel located on each side of the sampling channel was designed.

Rapid and efficient isotachophoretic preconcentration in free solution coupled with gel electrophoresis separation on a microchip using a negative pressure sampling technique.

We present a novel isotachophoresis-gel electrophoresis (ITP-GE) microchip system designed for rapid and efficient isotachophoretic preconcentration coupled with gel electrophoresis separation by using a negative pressure sampling technique. The overall ITP-GE procedure involves only three steps: sample loading, ITP preconcentration and GE separation and was controlled by a simple and compact negative pressure sampling device, which is composed of a vacuum vessel, a three-way electromagnetic valve and a single high voltage power supply. During the sample loading stage, a negative pressure was applied via a three-way electromagnetic valve in headspace of the two sealed sample waste reservoirs (SWs).

Rapid and variable-volume sample loading in sieving electrophoresis microchips using negative pressure combined with electrokinetic force.

A rapid and variable-volume sample loading scheme for chip-based sieving electrophoresis was developed by negative pressure combined with electrokinetic force. This was achieved by using a low-cost microvacuum pump and a single potential supply at a constant voltage. Both 12% linear polyacrylamide (LPA) with a high viscosity of 15000 cP and 2% hydroxyethylcellulose (HEC) with a low viscosity of 102 cP were chosen as the sieving materials to study the behavior and the versatility of the proposed method.

Field amplified sample stacking coupled with chip-based capillary electrophoresis using negative pressure sample injection technique.

A multi-T microchip for integrated field amplified sample stacking (FASS) with CE separation to increase the chip-based capillary electrophoresis (chip-based CE) sensitivity was developed. Volumetrically defined large sample plug was formed in one step within 5s by the negative pressure in headspace of the two sealed sample waste reservoirs produced using a syringe pump equipped with a 3-way valve. Stacking and separation can proceed only by switching the 3-way valve to release the vacuum in headspace of the two sample waste reservoirs.

Intracellular labeling method for chip-based capillary electrophoresis fluorimetric single cell analysis using liposomes.

An intracellular derivatization method mediated by liposome was developed for single cell analysis with chip-based capillary electrophoresis (CE) and laser-induced fluorescence (LIF) detection. Liposomes with an average diameter of 100 nm were produced from phosphatidylcholine to encapsulate fluorescent dyes by an ultrasonic method. The encapsulation yield and the vesicle density were determined to be 46+/-5% and 8.

Novel multi-depth microfluidic chip for single cell analysis.

A novel multi-depth microfluidic chip was fabricated on glass substrate by use of conventional lithography and three-step etching technology. The sampling channel on the microchip was 37 microm deep, while the separation channel was 12 microm deep. A 1mm long weir was constructed in the separation channel, 300 microm down the channel crossing.

Simultaneous determination of glutathione and reactive oxygen species in individual cells by microchip electrophoresis.

A microchip electrophoresis method was developed for simultaneous determination of reactive oxygen species (ROS) and reduced glutathione (GSH) in the individual erythrocyte cell. In this method, cell sampling, single-cell loading, docking, lysing, and capillary electrophoretic separation with LIF detection were integrated on a microfluidic chip with crossed channels. ROS was labeled with dihydrorhodamine 123 in the intact cell, while GSH was on-chip labeled with 2,3-naphthalene-dicarboxaldehyde, which was included in the separation medium.

Determination of reactive oxygen species in single human erythrocytes using microfluidic chip electrophoresis.

Reactive oxygen species (ROS) are known to not only mediate the damage of cellular constituents but also to regulate cellular signaling. Analysis of ROS is essential if we wish to understand the mechanisms of cellular alterations. In this paper, a microfluidic chip-based approach to the determination of ROS in single erythrocyte was developed by using a simple crossed-channel glass chip with integrated operational functions, including cell sampling, single cell loading, docking, lysing, and capillary electrophoretic (CE) separation with laser-induced fluorescence (LIF) detection.

Microfluidic chip-based liquid-liquid extraction and preconcentration using a subnanoliter-droplet trapping technique.

A robust and simple approach for microfluidic liquid-liquid (L-L) extraction at the subnanoliter-scale was developed for on-chip sample pretreatment. Organic solvent droplets of a few hundred pL were trapped within micro recesses fabricated in the channel walls of a microfabricated glass chip. L-L extraction was performed by delivering aqueous samples through the channel, with the sample stream continuously flowing adjacent to the droplets.

DNA separation with low-viscosity sieving matrix on microfabricated polycarbonate microfluidic chips.

Microfluidic devices have been fabricated on polycarbonate (PC) substrates by use of a hot embossing method using a silicon master template. By adding auxiliary lines around the functional channel on the silicon master, its lifetime was significantly prolonged and the bonding strength of the PC cover plate to the microfluidic chip was greatly improved. More than 300 polycarbonate microfluidic chips have been replicated with the same silicon mold.

Performance of PAHs emission from bituminous coal combustion.

Carcinogenic and mutagenic polycyclic aromatic hydrocarbons (PAHs) generated in coal combustion have caused great environmental health concern. Seventeen PAHs (16 high priority PAHs recommended by USEPA plus Benzo[e]pyrene) present in five raw bituminous coals and released during bituminous coal combustion were studied. The effects of combustion temperature, gas atmosphere, and chlorine content of raw coal on PAHs formation were investigated.

Integration of single cell injection, cell lysis, separation and detection of intracellular constituents on a microfluidic chip.

A microfluidic system was developed for the analysis of single biological cells, with functional integration of cell sampling, single cell loading, docking, lysing, and capillary electrophoretic (CE) separation with laser induced fluorescence (LIF) detection in microfabricated channels of a single glass chip. Channels were 12 microm deep and 48 microm wide, with a simple crossed-channel design. The effective separation channel length was 35 mm.

Solid-phase microextraction for flavor analysis in Harari Khat (Catha edulis) stimulant.

This research examined the typical flavor compounds in the commonest type of Khat called Harari Khat grown in the region of Ethiopia. Twenty-eight compounds, which includes 1,2-Propanedione, 1-Phenyl, Hexanol, Hexanal com-pounds, Limonene, Benzaldehyde with other flavors, were extracted by polydimethylsiloxane at room temperature for 30 min from Khat samples, and identified by solid-phase microextraction-gas chromatography-mass spectrometry (SPME- GC-MS). This method needs no organic solvents and required minimal sample.

[Progress in techniques of interfacing capillary electrophoresis with inductively coupled plasma mass spectrometry].

The coupling of capillary electrophoresis (CE) with inductively coupled plasma mass spectrometry (ICP-MS) has demonstrated multiple advantages, including high separation efficiency, sensitivity and resolution, as well as low sample consumption and detection limit. The technique has been widely used for the speciation of environmental and biological samples. The interface between CE and the nebulizing system of ICP-MS plays a key role in the hyphenation of CE and ICP-MS.