Construction of PVA/OHA-Gs@PTMC/PHA double-layer nanofiber flexible scaffold with antibacterial function for tension free rectal in-situ reconstruction.

The effective prevention and treatment of anastomotic leakage after intestinal anastomosis for colorectal diseases is still a major clinical challenge. In order to assist intestinal anastomosis healing and avoid anastomotic leakage caused by high tension, low blood supply or infection, we designed a double-layer nanofiber intestinal anastomosis scaffold, which was composed of electrospun PTMC/PHA nanofibers as the main layer, and electrospun PVA/OHA-Gs nanofibers with antibacterial properties as the antibacterial surface layer. This double-layer scaffold has good toughness, its maximum tensile force value could reach 8 N, elongation could reach 400 %, and it has hydrophilic properties, and its contact angle was about 60°.

Cu- or Ag-containing Bi-Sb-Te for in-line roll-to-roll patterned thin-film thermoelectrics.

The Selective Metallization Technique shows promise for roll-to-roll in-line patterning of flexible electronics using evaporated metals, but challenges arise when applied to sputtering functional materials. This study overcomes these challenges with simultaneous sputtering of Bi-Sb-Te and evaporation of metal (Ag or Cu) for thermoelectric layers when using Selective Metallization Technique. Large-scale manufacturing is demonstrated through roll-to-roll processing of a 0.

Molecular Ordering Manipulation in Fused Oligomeric Mixed Conductors for High-Performance n-Type Organic Electrochemical Transistors.

Advanced n-type organic electrochemical transistors (OECTs) play an important part in bioelectronics, facilitating the booming of complementary circuits-based biosensors. This necessitates the utilization of both n-type and p-type organic mixed ionic-electronic conductors (OMIECs) exhibiting a balanced performance. However, the observed subpar electron charge transport ability in most n-type OMIECs presents a significant challenge to the overall functionality of the circuits.

A novel single-port robotic proximal gastrectomy with right-sided overlap and single-flap valvuloplasty (RPG-ROSF) to treat gastroesophageal cancer: A case report.

Robotic surgery has been widely used in surgical gastric cancer treatments, including proximal gastrectomy. Single-port robotic system is gaining more popularity in robotic surgery, but there has been no report on its application in robotic proximal gastrectomy with right-sided overlap and single-flap valvuloplasty (RPG-ROSF). Here, we report an RPG-ROSF using a novel single-port robotic system in a 51-year-old male patient with an early-stage gastroesophageal cancer detected by gastroscopy.

3D printed PEDOT:PSS-based conducting and patternable eutectogel electrodes for machine learning on textiles.

The proliferation of medical wearables necessitates the development of novel electrodes for cutaneous electrophysiology. In this work, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is combined with a deep eutectic solvent (DES) and polyethylene glycol diacrylate (PEGDA) to develop printable and biocompatible electrodes for long-term cutaneous electrophysiology recordings. The impact of printing parameters on the conducting properties, morphological characteristics, mechanical stability and biocompatibility of the material were investigated.

Electrochemically actuated microelectrodes for minimally invasive peripheral nerve interfaces.

Electrode arrays that interface with peripheral nerves are used in the diagnosis and treatment of neurological disorders; however, they require complex placement surgeries that carry a high risk of nerve injury. Here we leverage recent advances in soft robotic actuators and flexible electronics to develop highly conformable nerve cuffs that combine electrochemically driven conducting-polymer-based soft actuators with low-impedance microelectrodes. Driven with applied voltages as small as a few hundreds of millivolts, these cuffs allow active grasping or wrapping around delicate nerves.

Light-Based 3D Multi-Material Printing of Micro-Structured Bio-Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics.

In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues.

Achieving ideal transistor characteristics in conjugated polymer semiconductors.

Organic thin-film transistors (OTFTs) with ideal behavior are highly desired, because nonideal devices may overestimate the intrinsic property and yield inferior performance in applications. In reality, most polymer OTFTs reported in the literature do not exhibit ideal characteristics. Supported by a structure-property relationship study of several low-disorder conjugated polymers, here, we present an empirical selection rule for polymer candidates for textbook-like OTFTs with high reliability factors (100% for ideal transistors).

Static and Dynamic Postannealing Strategies for Roll-to-Roll Fabrication of DC Magnetron Sputtered Bismuth Telluride Thin Films onto Polymer Webs.

High-throughput roll-to-roll processes are desirable to scale up the manufacture of flexible thermoelectric generators. While vacuum deposition onto a heated dynamic substrate presents a considerable engineering challenge, viable postdeposition in-line annealing processes are considered as an alternative to improve the functional performance of as-deposited films. The effect of infrared and electron-beam irradiations of 1 μm thick bismuth telluride thin films, produced by a vacuum roll-to-roll process for use as thermoelectric materials, was examined.

Designing perfect linear polarization converters using perfect electric and magnetic conducting surfaces.

We propose a kind of general framework for the design of a perfect linear polarization converter that works in the transmission mode. Using an intuitive picture that is based on the method of bi-directional polarization mode decomposition, it is shown that when the device under consideration simultaneously possesses two complementary symmetry planes, with one being equivalent to a perfect electric conducting surface and the other being equivalent to a perfect magnetic conducting surface, linear polarization conversion can occur with an efficiency of 100% in the absence of absorptive losses. The proposed framework is validated by two design examples that operate near 10 GHz, where the numerical, experimental and analytic results are in good agreements.