Flexible multilevel nonvolatile biocompatible memristor with high durability.

Current protein or glucose based biomemristors have low resistance-switching performance and require complex structural designs, significantly hindering the development of implantable memristor devices. It is imperative to discover novel candidate materials for biomemristor with high durability and excellent biosafety for implantable health monitoring. Herein, we initially demonstrate the resistance switching characteristics of a nonvolatile memristor in a configuration of Pt/AlOOH/ITO consisting of biocompatible AlOOH nanosheets sandwiched between a Indium Tin Oxides (ITO) electrode and a platinum (Pt) counter-electrode.

Dramatic improvement in the mechanical properties of polydopamine/polyacrylamide hydrogel mediated human amniotic membrane.

Human amniotic membrane (hAM) is a promising material for tissue engineering due to several benefits, including desirable biocompatibility, stem cell source, antibacterial activity, . However, because of its low elasticity, the clinical application of hAM is severely restricted. To solve this issue, we employed polydopamine/polyacrylamide (PDA/PAM) hydrogels to toughen hAM.

Nanoscale pulverization effect in double-layered MOF-derived hierarchical G/Co@C composites for boosting electromagnetic wave dissipation.

Metal-organic frameworks (MOFs) have drawn a lot of interest as prospective starting points for highly effective electromagnetic wave (EMW) absorbers. However, the inevitable shrinkage and probable densification that occur during pyrolysis significantly reduce the microwave-loss capacity. A dual-layer MOF, ZIF-8@ZIF-67, is created and effectively decorated on graphene sheets as a solution to this problem.

Multifunctional TiCT MXene Composite Hydrogels with Strain Sensitivity toward Absorption-Dominated Electromagnetic-Interference Shielding.

The fast development of terahertz technologies demands high-performance electromagnetic interference (EMI) shielding materials to create safe electromagnetic environments. Despite tremendous breakthroughs in achieving superb shielding efficiency (SE), conventional shielding materials have high reflectivity and cannot be re-edited or recycled once formed, resulting in detrimental secondary electromagnetic pollution and poor adaptability. Herein, a hydrogel-type shielding material incorporating MXene and poly(acrylic acid) is fabricated through a biomineralization-inspired assembly route.

Bismaleimide bridged silsesquioxane aerogels with excellent heat resistance: effect of sol-gel solvent polarity.

Due to the poor heat-resistance and intrinsic weakness of the bridging moieties in aerogel matrixes, it remains greatly challenging to fabricate highly thermostable and toughened silsesquioxane aerogels. By utilizing bismaleimide as the bridging part and optimizing the solvent polarity, lightweight (ρ < 0.09 g cm-3), compressible (80% strain) and superhydrophobic (CA ≈ 150°) bismaleimide bridged silsesquioxane aerogels (BMIT-BSAs) are constructed.

Bioinspired reinforcement of cyclosiloxane hybrid polymer.

Structural analysis showed that cyclosiloxane hybrid polymer (CHP) is a collection of nano-sized nacre-like structures in random orientations. Inspired by the reinforcement of nacre-like materials, basal-functionalized graphene (GO-AA) was inserted between CHP layers, acting as 'double-sided tape' to improve the mechanical properties. The resulting GO-AA/CHP nanocomposites showed a 156% improvement in toughness with only a 0.

General Metal-Ion Mediated Method for Functionalization of Graphene Fiber.

Graphene fibers (GFs) are attractive materials for wearable electronics because of their lightness, superior flexibility, and electrical conductivity. However, the hydrophobic nature and highly stacked structure endow GFs similar characteristics in nature to solid carbon fibers. Therefore, the interior functionalization of GFs so as to achieve synergistic interaction between graphene nanosheets and active materials thus enhance the performance of hybrid fibers remains a challenge.

Polydopamine decoration on 3D graphene foam and its electromagnetic interference shielding properties.

3D graphene foam was recently demonstrated to exhibit excellent electromagnetic interference (EMI) shielding performance. In this work, we prepared 3D graphene foams by incorporating a surface modification process of graphene via self-polymerization of dopamine with a subsequent foaming process. The multiple roles played by polydopamine (PDA), including as nitrogen doping source and as an enhancement tool to achieve higher extent of reduction of the graphene through providing wider pathways and larger accessible surface areas were discussed in detail.

Mechanical, tribological and biological properties of novel 45S5 Bioglass composites reinforced with in situ reduced graphene oxide.

45S5 Bioglass (45S5) is one of the most widely used biomaterials in ceramic-based bone graft substitutes by virtue of its excellent biocompatibility and bioactivity. However, the fracture toughness and wear resistance of 45S5 have to be improved to extend its applications in load bearing orthopedic implants. The current study reports the first use of graphene nanoplatelet (GNP) to enhance the fracture toughness and wear resistance of 45S5.

Single-Step Process toward Achieving Superhydrophobic Reduced Graphene Oxide.

We report the first use of spark plasma sintering (SPS) as a single-step process to achieve superhydrophobic reduced graphene oxide (rGO). It was found that SPS was capable of converting smooth and electrically insulating graphene oxide (GO) sheets into highly electrically conductive rGO with minimum residual oxygen and hierarchical roughness which could be well retained after prolonged ultrasonication. At a temperature of 500 °C, which is lower than the conventional critical temperature for GO exfoliation, GO was successfully exfoliated, reduced, and hierarchically roughened.

In-grown structure of NiFe mixed metal oxides and CNT hybrid catalysts for oxygen evolution reaction.

This work reports a unique in-grown structure of a NiFe-MMO/CNT hybrid catalyst. This structure creates larger interfacial area and strong interaction between the NiFe-MMO catalyst and the CNT, which could promote charge transfer at the interface, and hence improve conductivity. This leads to outstanding electrochemical performance for oxygen evolution reaction.

Enhanced molecular level dispersion and interface bonding at low loading of modified graphene oxide to fabricate super nylon 12 composites.

Development of advanced graphene based polymer composites is still confronted with severe challenges due to its poor dispersion caused by restacking, weak interface bonding, and incompatibility with polymer matrices which suppress exertion of the actual potential of graphene sheets in composites. Here, we have demonstrated an efficient chemical modification process with polyethylenimine (PEI) to functionalize graphene oxide which can overcome the above-mentioned drawbacks and also can remarkably increase the overall strength of the nylon 12 composites even at very low graphene loading. Chemical modification was analyzed by various surface characterizations including X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction.

Growth of silver nanocrystals on graphene by simultaneous reduction of graphene oxide and silver ions with a rapid and efficient one-step approach.

A rapid and efficient one-step approach to prepare graphene-Ag nanocomposites by simultaneous reduction of graphene oxide (GO) and silver ions with formaldehyde as the reducing agent within several minutes was demonstrated.

Differential expression of components of the microRNA machinery during mouse organogenesis.

MicroRNA (miRNA)-mediated gene silencing has recently emerged as a major mechanism of gene expression regulation during development in a variety of species. Little is known, however, about the presence of components of miRNA machinery in mammalian organogenesis. In this study, we report that members of the Argonaute (Ago) gene family are expressed in restricted of the day 11.