Enhanced peroxymonosulfate activation for organic decontamination by Ni-doped δ-FeOOH under visible-light assistance.

There is an urgent need for efficient and cost-effective methods without secondary pollution to decompose pollutants from contaminated water in the face of severe water pollution caused by the extensive use of synthetic dye in industry. In this work, Ni-doped δ-FeOOH was synthesized using co-precipitation method at room temperature and was applied as the catalyst in a visible-light-assisted peroxymonosulfate system for assessing its catalytic performance in RhB removal. An optimum RhB degradation of 99.

Application of machine learning in the study of cobalt-based oxide catalysts for antibiotic degradation: An innovative reverse synthesis strategy.

This study addresses antibiotic pollution in global water bodies by integrating machine learning and optimization algorithms to develop a novel reverse synthesis strategy for inorganic catalysts. We meticulously analyzed data from 96 studies, ensuring quality through preprocessing steps. Employing the AdaBoost model, we achieved 90.

High-performance, stable CoNi LDH@Ni foam composite membrane with innovative peroxymonosulfate activation for 2,4-dichlorophenol destruction.

In this study, the cobalt-nickel layered double hydroxides (CoNi LDH) were synthesized with a variety of Co/Ni mass ratio, as CoNi LDHs. In comparison, CoNi LDH presented the best peroxymonosulfate (PMS) activation efficiency for 2,4-dichlorophenol removal. Meanwhile, CoNi LDH@Nickel foam (CoNi LDH@NF) composite membrane was constructed for enhancing the stability of catalytic performance.

Removal of sulfonamide antibiotics by non-free radical dominated peroxymonosulfate oxidation catalyzed by cobalt-doped sulfur-containing biochar from sludge.

The reuse of activated sludge as a solid waste is severely underutilized due to the limitations of traditional treatment and disposal methods. Given that, the sulfur-containing activated sludge catalyst doped with cobalt (SK-Co(1.0)) was successfully prepared by one-step pyrolysis and calcinated at 850 ℃.

Utilization of spent coffee grounds as fillers to prepare polypropylene composites for food packaging applications.

Biomass-derived wastes as the additive of nondegradable plastics have been paid more attention due to the ever-growing environmental pollution and energy crisis. Herein, the spent coffee grounds (SCG) have been used as fillers in polypropylene (PP) after the heat treatment to realize its recycling utilization. The effect of the heat treatment atmosphere on the properties of the obtained SCG and SCG/PP composites has been investigated systematically.

Stable photodegradation of antibiotics by the functionalized 3D-BiMoO@MoO/PU composite sponge: High efficiency pathways, optical properties and Z-scheme heterojunction mechanism.

The designation and fabrication of heterogeneous photocatalyst with superior redox capability is an important technique for emerging pollutants treatment. In this study, we designed the Z-scheme heterojunction of stable 3D-BiMoO@MoO/PU, which could not only accelerate the migration and separation in photogenerated carriers, but also stabilize the separation rate of photo-generation carriers. In the BiMoO@MoO/PU photocatalytic system, 88.

Insights into performance and mechanism of ZnO/CuCoO composite as heterogeneous photoactivator of peroxymonosulfate for enrofloxacin degradation.

In this study, we designed a plain strategy for fabrication of the novel composite ZnO/CuCoO and applied it as catalyst for peroxymonosulfate (PMS) activation to decompose enrofloxacin (ENR) under simulated sunlight. Compared to ZnO and CuCoO alone, the ZnO/CuCoO composite could significantly activate PMS under simulated sunlight, resulting in the generation of more active radicals for ENR degradation. Thus, 89.

A novel iron molybdate photocatalyst with heterojunction-like band gap structure for organic pollutant degradation by activation of persulfate under simulated sunlight irradiation.

Advanced oxidation processes (AOPs) applied to wastewater treatment have become increasingly well developed and the ability of a single technology to remove difficult organic pollutants is limited. One of the main limiting factors is the insufficient variety and quantity of active species generated during the reaction process and catalyst failure. The coupling of the two methods is a practical and effective approach.

Well-aligned three-dimensional silk fibroin protein scaffold for orientation regulation of cells.

The similar characteristics of biomaterials to the extracellular matrix are essential for efficient tissue repair through dictating cell behaviors. But the scaffold fabrication with complex shapes and controlled alignment have proven to be a difficult task. Herein, a well-designed three-dimensional silk fibroin scaffold is fabricated through ice template technology.

Activation of sulfite by micron-scale iron-carbon composite for metronidazole degradation: Theoretical and experimental studies.

In recent years, sulfite (S(Ⅳ)), as an alternative to persulfates, has played a crucial role in eliminating antibiotics in wastewater, so there is an urgent need to develop a cheap, environmentally friendly, and effective catalyst. Zero-valent iron (ZVI) has great potential for activated S(Ⅳ) removal of organic pollutants, but its reactivity in water is reduced due to passivation. In this study, a micron-scale iron-carbon composite(mZVI@C-800) prepared via high-temperature calcination was coupled with S(Ⅳ) to degrade metronidazole (MNZ).

Covalent organic frameworks@ZIF-67 derived novel nanocomposite catalyst effectively activated peroxymonosulfate to degrade organic pollutants.

Metal organic frameworks-Covalent organic frameworks (MOFs-COFs) nanocomposites could improve the catalytic performance. Herein, a novel nanocomposite catalyst (CC@CoO) derived from MOFs-COFs (COF@ZIF-67) was prepared on peroxymonosulfate (PMS) activation for bisphenol A (BPA) and rhodamine B (RhB) degradation. Owing to the Co species, oxygen vacancy (O), surface hydroxyl (-OH), graphite N and ketone groups (C=O), the CC@CoO exhibited higher catalytic degradation performance and total organic carbon (TOC) for BPA (93.

Degradation of chlortetracycline hydrochloride by peroxymonosulfate activation on natural manganese sand through response surface methodology.

This work studies the degradation of chlortetracycline hydrochloride (CTC) by activated peroxymonosulfate (PMS) with natural manganese sand (NMS). Meanwhile, the NMS was characterized and analyzed by isothermal nitrogen adsorption (BET), energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscope (SEM). It can be induced that NMS material may contain C, O, Al, Si, Fe, Mn, and K, and the proportion of each is 6%, 9%, 13%, 34%, 27%, 5%, and 6%.

Efficient degradation of lomefloxacin by Co-Cu-LDH activating peroxymonosulfate process: Optimization, dynamics, degradation pathway and mechanism.

In this study, bimetal layered double hydroxides (CoCu-LDHs) containing a carbonate interlayer were synthesized using coprecipitation with a variety of Co/Cu mole ratios. Meanwhile, the corresponding layered double oxides (CoCu-LDOs) were prepared as controls. In this study, Electrical energy per order was performed to evaluate economic analysis.

Octadecylamine degradation through catalytic activation of peroxymonosulfate by FeMn layered double hydroxide.

A kind of heterogeneous catalyst, FeMn layered double hydroxide (Fe-Mn-LDH), was fabricated by coprecipitation process and used as PMS activator to degrade a novel organic pollutant octadecylamine (ODA). And the X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microcopy (TEM), Mapping and X-ray photoelectron spectra (XPS) measurements were utilized to characterize the fresh and used Fe-Mn-LDH. After a serious of degradation experiments, it was clearly to see that the activator possessed excellent activation property for PMS and was capable of removing 85% ODA (10 mg·L) within 25 min obviously higher than pure PMS.

A Facile Strategy to Fabricate Nanoscale Zero-Valent Iron Decorated Graphene Oxide Composite for Dechloridation of Trichloroacetic Acid in Water.

In this study, nanoscale zero-valent iron decorated graphene oxide (NZVI/GO) composite was fabricated through a reduction process in the presence of sodium borohydride (NaBH4) solution. Subsequently, physicochemical properties of the NZVI/GO composites were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), N2 adsorption/desorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy (FT-IR) and Raman spectra. Results indicated that Fe species existed in the form of Fe0, which uniformly dispersed on the surface of GO.

Synthesis of Magnetic CoFe₂O₄ Nanoparticles and Their Efficient Degradation of Diclofenac by Activating Persulfate via Formation of Sulfate Radicals.

In this study, magnetic CoFe2O4 nanoparticles were synthesized by hydrothermal method by using ferric nitrate and cobalt nitrate as raw materials. Subsequently, physicochemical properties of the resulting CoFe2O4 nanoparticles were systematically studied by scanning electron microscope, X-ray diffraction, N2 adsorption/desorption, Fourier transformation infrared spectroscopy and Vibration sample magnetometer measurement. Results indicated that CoFe2O4 nanoparticles with cubic spinel structure possessed an average diameter of 6.

Fabrication of Silver Decorated Graphene Oxide Composite for Photocatalytic Inactivation of .

In this study, silver decorated graphene oxide (Ag/GO) composite was fabricated through a reduction process in the presence of potassium borohydride solution. Subsequently, physicochemical properties of the resulting Ag/GO composite were studied by scanning electron microscope, X-ray diffraction, Raman spectra, Fourier transformation infrared spectroscopy and UV-visible diffuse reflectance spectrum. Results indicated that Ag species existed in the form of Ag0, which greatly facilitated the visible light absorbance ability.

Synthesis of silver phosphate/graphene oxide composite and its enhanced visible light photocatalytic mechanism and degradation pathways of tetrabromobisphenol A.

In the present study, silver phosphate/graphene oxide (AgPO/GO) composite was synthesized by ultrasound-precipitation processes. Afterwards, physicochemical properties of the resulting samples were studied through scanning electron microscope, transmission electron microscope, X-ray diffraction, N adsorption/desorption, UV-vis diffuse reflectance spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy and photoelectrochemical measurements. Results indicated that spherical AgPO displayed an average diameter of 150 nm and body-centered cubic crystal phase, which was integrated with GO.

Distribution and genetic diversity of microbial populations in the pilot-scale biofilter for simultaneous removal of ammonia, iron and manganese from real groundwater.

A pilot-scale biofilter treating real groundwater was developed in this study, which showed that ammonia, iron and manganese were mainly removed at 0.4, 0.4 and 0.

A facile and novel strategy to synthesize reduced TiO₂ nanotubes photoelectrode for photoelectrocatalytic degradation of diclofenac.

TiO2 nano-materials have been considered as a versatile candidate for the photoelectrochemical (PECH) applications. In this study, we reported a facile and novel strategy to synthesize reduced TiO2 nanotubes (TiO2 NTs) photoelectrode. The microwave reduction could introduce oxygen vacancy in the lattice of TiO2, while the rapid-production of oxygen vacancy facilitated the generation of impurity level between the forbidden band and greatly enhancement of visible light absorption, thereby resulting in an improved separation efficiency of photogenerated charge carriers and photocatalytic (PC) performance.

Effect of post-annealing treatment on photocatalytic and photoelectrocatalytic performances of TiO2 nanotube arrays photoelectrode.

Highly ordered TiO2 nano-tube arrays (TNTAs) photoelectrodes were prepared through anodization method, followed by annealing treatment. Morphologies and structures of the as-prepared TNTAs samples were investigated through scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, the optical and photoelectrochemical (PECH) properties were investigated through ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS) and transient photocurrent response.

Preparation and characterization of palladium nano-crystallite decorated TiO₂ nano-tubes photoelectrode and its enhanced photocatalytic efficiency for degradation of diclofenac.

TiO2 has been considered as a versatile candidate for the photoelectrochemical (PECH) application. In this study, Pd nano-crystallite decorated TiO₂ nano-tubes (Pd/TNTs) photoelectrode was prepared through electrochemical deposition. The resulting Pd/TNTs samples were characterized by SEM, XRD, DRS and XPS.