LiZrF-based electrolytes for durable lithium metal batteries.

Lithium (Li) metal batteries (LMBs) are promising for high-energy-density rechargeable batteries. However, Li dendrites formed by the reaction between highly active Li and non-aqueous electrolytes lead to safety concerns and rapid capacity decay. Developing a reliable solid-electrolyte interphase is critical for realizing high-rate and long-life LMBs, but remains technically challenging.

Voltage-Induced Bromide Redox Enables Capacity Restoration of Fast-Charging Batteries.

Fast-charging lithium-ion batteries (LIBs) are essential for electric vehicles (EVs) to compete with conventional gasoline ones in terms of charging viability, yet the aggressive capacity drop in fast-charging scenarios gives rise to concerns regarding durability and sustainability. Herein, it is clarified that for fast-charging batteries, the excessive lithium (Li) plating on graphite anode inevitably brings capacity fading, and the concurrent accumulation of LiO-dominant passivation species that form dead Li is the main reason for their poor rechargeability. To refresh the passivated graphite, a voltage-induced activation mechanism is developed to leverage bromide (Br/Br ) redox couple for LiO and isolated Li activation in situ.

Loosening the Solvation Cage in Polysaccharide Polymer Electrolyte for Sustainable Lithium Metal Batteries.

Biomass with naturally ion-conducting segments (e.g., hydroxyl) holds promise for sustainable batteries.

A density functional theory study of two-dimensional bismuth selenite: layer-dependent electronic, transport and optical properties with spin-orbit coupling.

Recently, atomic-thickness van der Waals (vdW) layered bismuth selenite (BiSeO) has been successfully synthesized, not only expanding the family of two-dimensional (2D) materials, but also playing a pivotal role in the advancement of 2D electronics as a high- dielectric. In this work, we systematically study the basic properties of 2D BiSeO through first-principles calculations, focusing on the spin-orbit coupling (SOC) effect and layer-dependent behaviors. The results show that SOC can adjust the bandgap of bulk/2D BiSeO from direct to indirect, with the bandgap decreasing upon increasing the thickness due to quantum confinement.

Identifying the Role of Interfacial Long-Range Order in Regulating the Solid Electrolyte Interphase in Lithium Metal Batteries.

The self-assembled monolayer (SAM) technique, known for its customizable molecular segments and active end groups, is widely recognized as a powerful tool for regulating the interfacial properties of high-energy-density lithium metal batteries. However, it remains unclear how the degree of long-range order in SAMs affects the solid electrolyte interphase (SEI). In this study, we precisely controlled the hydrolysis of silanes to construct monolayers with varying degrees of long-range order and investigated their effects on the SEI nanostructure and lithium anode performance.

Balancing Potassiophilicity and Catalytic Activity of Artificial Interface Layer for Dendrite-Free Sodium/Potassium Metal Batteries.

Potassium metal batteries (PMBs), with high energy density and low cost, are considered a promising option for grid-scale energy storage systems. However, challenges such as the uneven nucleation of K and instability of the solid electrolyte interphase (SEI) layer result in dendrite growth and poor cyclic performance, limiting practical application. To address them, constructing an artificial interface layer with rich defects can enhance the potassium affinity and promote the uniform nucleation of potassium, yet this can also catalyze electrolyte to decompose, leading to unstable SEI formation and poor cycle stability.

Electric pulses rejuvenate batteries.

Dielectrophoresis allows "dead" material to recover its activity.

High-voltage electrosynthesis of organic-inorganic hybrid with ultrahigh fluorine content toward fast Li-ion transport.

Hybrid materials with a rational organic-inorganic configuration can offer multifunctionality and superior properties. This principle is crucial but challenging to be applied in designing the solid electrolyte interphase (SEI) on lithium metal anodes (LMAs), as it substantially affects Li transport from the electrolyte to the anode. Here, an artificial SEI with an ultrahigh fluorine content (as high as 70.

Biometabolically Derived Selenium Nanoparticles Armed with Protein Protective Suit toward High-Performance Li-Se Batteries.

Selenium (Se) serves as a burgeoning high-energy-density cathode material in lithium-ion batteries. However, the development of Se cathode is strictly limited by low Se utilization and inferior cycling stability arising from intrinsic volume expansion and notorious shuttle effect. Herein, a microbial metabolism strategy is developed to prepare "functional vesicle-like" Se globules via Bacillus subtilis subsp.

Prediction of Novel Trigonal Chloride Superionic Conductors as Promising Solid Electrolytes for All-Solid-State Lithium Batteries.

Recently emerging lithium ternary chlorides have attracted increasing attention for solid-state electrolytes (SSEs) due to their favorable combination between ionic conductivity and electrochemical stability. However, a noticeable discrepancy in Li-ion conductivity persists between chloride SSEs and organic liquid electrolytes, underscoring the need for designing novel chloride SSEs with enhanced Li-ion conductivity. Herein, an intriguing trigonal structure (i.

π-π Stacked Nigrosine@Carbon Nanotube Nanocomposite as an All-in-One Additive for High Energy Flexible Batteries.

The pursuit of high energy density in lithium batteries has driven the development of efficient electrodes with low levels of inactive components. Herein, a facile approach involving the use of π-π stacked nigrosine@carbon nanotube nanocomposites as an all-in-one additive for a LiFePO cathode has been developed. This design significantly reduces the proportion of inactive substances within the cathode, resulting in a battery that exhibits a high specific capacity of 143 mAh g at a 1 C rate and shows commendable cyclic performance.

First-Principles Study on Polymer Electrolyte Interface Engineering for Lithium Metal Anodes.

Modifying the interface between the lithium metal anode (LMA) and the electrolyte is crucial for achieving high-performance lithium metal batteries (LMBs). Recent research indicates that altering Li-metal interfaces with polymer coatings is an effective approach to extend LMBs' cycling lifespan. However, the physical properties of these polymer-Li interfaces have not yet been fully investigated.

Formation of 2D Amorphous Lithium Sulfide Enabled by MoC Clusters Loaded Carbon Scaffold for High-Performance Lithium Sulfur Batteries.

Lithium-sulfur (Li-S) batteries, operated through the interconversion between sulfur and solid-state lithium sulfide, are regarded as next-generation energy storage systems. However, the sluggish kinetics of lithium sulfide deposition/dissolution, caused by its insoluble and insulated nature, hampers the practical use of Li-S batteries. Herein, leaf-like carbon scaffold (LCS) with the modification of MoC clusters (MoC@LCS) is reported as host material of sulfur powder.

Mediating Zn Ions Migration Behavior via β-Cyclodextrin Modified Carbon Nanotube Film for High-Performance Zn Anodes.

Metallic Zn is considered as a promising anode material because of its abundance, eco-friendliness, and high theoretical capacity. However, the uncontrolled dendrite growth and side reactions restrict its further practical application. Herein, we proposed a β-cyclodextrin-modified multiwalled carbon nanotube (CD-MWCNT) layer for Zn metal anodes.

Unraveling the Nucleation and Growth Mechanism of Potassium Metal on 3D Skeletons for Dendrite-Free Potassium Metal Batteries.

Designing three-dimensional (3D) porous carbonaceous skeletons for K metal is one of the most promising strategies to inhibit dendrite growth and enhance the cycle life of potassium metal batteries. However, the nucleation and growth mechanism of K metal on 3D skeletons remains ambiguous, and the rational design of suitable K hosts still presents a significant challenge. In this study, the relationships between the binding energy of skeletons toward K and the nucleation and growth of K are systematically studied.

Construction of LiF-LiN-Rich Interface Contributed to Fast Ion Diffusion in All-Solid-State Lithium-Sulfur Batteries.

All-solid-state lithium-sulfur batteries (ASSLSBs) have attracted wide attention due to their ultrahigh theoretical energy density and the ability of completely avoiding the shuttle effect. However, the further development of ASSLSBs is limited by the poor kinetic properties of the solid electrode interface. It remains a great challenge to achieve good kinetic properties, by common strategies to substitute sulfur-transition metal and organosulfur composites for sulfur without reducing the specific capacity of ASSLSBs.

A Triply-Periodic-Minimal-Surface Structured Interphase based on Fluorinated Polymers Strengthening High-energy Lithium Metal Batteries.

The challenge of constructing a mechanically robust yet lightweight artificial solid-electrolyte interphase layer on lithium (Li) anodes highlights a trade-off between high battery safety and high energy density. Inspired by the intricate microstructure of the white sea urchin, we first develop a polyvinyl fluoride-hexafluoropropylene (PVDF-HFP) interfacial layer with a triple periodic minimal surface structure (TPMS) that could offer maximal modulus with minimal weight. This design endows high mechanical strength to an ordered porous structure, effectively reduces local current density, polarization, and internal resistance, and stabilizes the anode interface.

Ultralong Cycling and Safe Lithium-Sulfur Pouch Cells for Sustainable Energy Storage.

While layered metal oxides remain the dominant cathode materials for the state-of-the-art lithium-ion batteries, conversion-type cathodes such as sulfur present unique opportunities in developing cheaper, safer, and more energy-dense next-generation battery technologies. There has been remarkable progress in advancing the laboratory scale lithium-sulfur (Li-S) coin cells to a high level of performance. However, the relevant strategies cannot be readily translated to practical cell formats such as pouch cells and even battery pack.

Anode-Free Sodium Metal Pouch Cell Using CuP Nanowires In Situ Grown on Current Collector.

Anode-free sodium metal battery (AFSMB) promises high energy density but suffers from the difficulty of maintaining high cycling stability. Nonuniform sodium (Na) deposition on the current collector is largely responsible for capacity decay in the cycling process of AFSMB. Here, a unique copper phosphide (CuP) nanowire is constructed on copper (CuP@Cu) as a sodium deposition substrate by an in situ growth method.

A corrosion inhibiting layer to tackle the irreversible lithium loss in lithium metal batteries.

Reactive negative electrodes like lithium (Li) suffer serious chemical and electrochemical corrosion by electrolytes during battery storage and operation, resulting in rapidly deteriorated cyclability and short lifespans of batteries. Li corrosion supposedly relates to the features of solid-electrolyte-interphase (SEI). Herein, we quantitatively monitor the Li corrosion and SEI progression (e.

Amorphous Chloride Solid Electrolytes with High Li-Ion Conductivity for Stable Cycling of All-Solid-State High-Nickel Cathodes.

Solid electrolytes (SEs) are central components that enable high-performance, all-solid-state lithium batteries (ASSLBs). Amorphous SEs hold great potential for ASSLBs because their grain-boundary-free characteristics facilitate intact solid-solid contact and uniform Li-ion conduction for high-performance cathodes. However, amorphous oxide SEs with limited ionic conductivities and glassy sulfide SEs with narrow electrochemical windows cannot sustain high-nickel cathodes.

Separator Engineering Based on Cl-Terminated MXene Ink: Enhancing Li Diffusion Kinetics with a Highly Stable Double-Halide Solid Electrolyte Interphase.

Separator engineering is a promising route to designing advanced lithium (Li) metal anodes for high-performance Li metal batteries (LMBs). Conventional separators are incapable of regulating the Li diffusion across the solid electrolyte interphase (SEI), leading to severe dendritic deposition. To address this issue, a polypropylene (PP) separator modified by spray coating the Cl-terminated titanium carbonitride MXene ink is designed (PP@TiCNCl).

Dendrite-Free and High-Rate Potassium Metal Batteries Sustained by an Inorganic-Rich SEI.

Potassium metal battery is an appealing candidate for future energy storage. However, its application is plagued by the notorious dendrite proliferation at the anode side, which entails the formation of vulnerable solid electrolyte interphase (SEI) and non-uniform potassium deposition on the current collector. Here, this work reports a dual-modification design of aluminum current collector to render dendrite-free potassium anodes with favorable reversibility.