Designing Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate/Graphene Oxide/Graphene Nanosheet/Polyethylene Glycol Phase-Change Composites with Superior Thermal Management for Photo-thermoelectric Generators.

Recently, growing interest in self-powered devices has led to the invention of new energy conversion devices. Photo-thermoelectric generators (PTEGs) have rapidly developed for their ability to harvest both light and thermal energy, but these devices are overly dependent on the continuity of energy input and cannot sustain output in an emergency situation. In the current study, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/graphene oxide (GO)/graphene nanosheets (GNPs)/polyethylene glycol (PEG) phase-change composites (PCCs) were prepared with freeze-drying and vacuum-filling processes to acquire materials suitable for imparting energy storage characteristics to PTEGs.

Achieving Free-Standing PEDOT:PSS Solar Generators with Efficient All-in-One Photothermoelectric Conversion.

Poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has attracted widespread attention in solar generation due to its unique all-in-one photothermoelectric effect. However, the poor photothermal conversion, low conductivity, and unsatisfied mechanical properties limit its practical application. Herein, ionic liquids (IL) were first used to improve the conductivity of PEDOT:PSS through ion exchange, then surface-charged nanoparticles SiO-NH (SiO) were added to promote the dispersion of IL and as a thermal insulator to decrease thermal conductivity.

Constructing A/B-Side Heterogeneous Asynchronous Structure with AgSe Layers and Bushy-like PPy toward High-Performance Flexible Photo-Thermoelectric Generators.

The enthusiasm for environmental energy harvesting has triggered a boom in research on photo-thermoelectric generators (PTEGs), and the relevant applications are mainly focused on self-energy supply sensors owing to the limitations of their output performances. For this purpose, high-output hierarchical heterogeneous PTEGs were constructed by assembling separately optimized thermoelectric (TE) and photothermal (PT) layers. The pressure and temperature conditions of AgSe films during the pressing process were first explored, and the sample with the optimal performance and least defects was selected as the TE layer.

Ultraflexible PEDOT:PSS/Helical Carbon Nanotubes Film for All-in-One Photothermoelectric Conversion.

Photothermoelectric (PTE) conversion can achieve the recovery of low-quality light or heat efficiently. Much effort has been devoted to the exploitation of the inorganic heterogeneous asynchronous (separate) PTE conversion system. Here, a full organic PTE film with a pseudobilayer architecture (PBA) according to the homogeneous synchronous (all-in-one) PTE conversion hypothesis was prepared via successive drop-casting a PEDOT:PSS/helical carbon nanotube (HCNT) mixture and PEDOT:PSS onto a vacuum ultraviolet treated substrate.

Polypyrrole/Helical Carbon Nanotube Composite with Marvelous Photothermoelectric Performance for Longevous and Intelligent Internet of Things Application.

Helical carbon nanotube (HCNT) is a vital member of carbon nanomaterials, but little effort was devoted to explore its unique characteristics and applications during the past few decades. Here, we report an organic thermoelectric composite with an excellent photothermoelectric (PTE) effect by conformally wrapping polypyrrole (PPy) on the intricate surface of HCNTs, which have been confirmed to have remarkable near-infrared (NIR) photothermal conversion capability and ultralow heat transportation characteristics. The results indicate that with the increasing HCNT content, PPy shell thickness reduces and exhibits denser as well as partial orientation, while the inter-ring angle slowly decreases and the bipolaron becomes dominant in carrier composition gradually.

Constructing cellulose nanocrystal/graphene nanoplatelet networks in phase change materials toward intelligent thermal management.

The hybrid networks of cellulose nanocrystals (CNCs) and graphene nanoplatelets (GNPs) were constructed in polyethylene glycol (PEG) through the common solution compounding processing, in which GNPs provided the thermally conductive path while CNCs restricted the leakage of PEG during the phase transition. The results showed that CNCs greatly enhanced the shape stability of the composite phase change materials (PCMs) while thermal conductivity was still maintained at high level. At the contents of 8 wt% (CNCs) and 4 wt% (GNPs), the enthalpy of the composite PCM was 145.

Melamine foam and cellulose nanofiber co-mediated assembly of graphene nanoplatelets to construct three-dimensional networks towards advanced phase change materials.

Organic phase change materials (OPCMs) play a great role in energy management owing to their large phase change enthalpy, but their intrinsic low thermal conductivity (TC) and bad encapsulation severely restrict their applications. To overcome these problems, we developed a novel but feasible method to fabricate a graphene nanoplatelet (GNP) aerogel with compact and oriented stacking in-plane walls and many through-plane bridges via melamine foam (MF) and cellulose nanofiber (CNF) co-mediated assembly of GNPs. After impregnating paraffin wax (PW), the composite PCMs exhibit a high TC of 1.

Constructing reduced graphene oxide/boron nitride frameworks in melamine foam towards synthesizing phase change materials applied in thermal management of microelectronic devices.

Phase change materials (PCMs) exhibit wide application prospects in many fields related to energy utilization and management and attract increasing interest. In this work, through the graphene oxide (GO)-assisted dispersion technology, GO/boron nitride (BN) nanosheets were incorporated into melamine foam and successfully deposited on the surface of the foam framework after hydrothermal reaction. Through the following freeze-drying and carbonization treatment, the composite MF/rGO/BN aerogels were obtained with integrated hybrid rGO/BN frameworks.

Electrospun Fibrous Membranes with Dual-Scaled Porous Structure: Super Hydrophobicity, Super Lipophilicity, Excellent Water Adhesion, and Anti-Icing for Highly Efficient Oil Adsorption/Separation.

Developing highly efficient and multifunctional membranes toward oil adsorption and oil/water separation is of significance in oily wastewater treatment. Herein, a novel electrospun composite membrane with dual-scaled porous structure and nanoraised structure on each fiber was fabricated through electrospinning using biodegradable polylactide (PLA) and magnetic γ-FeO nanoparticles. The PLA/γ-FeO composite membranes show high porosity (>90%), superhydrophobic and superlipophilic performances with CHI contact angle of 0°, good water adhesion ability like water droplets on a petal surface, excellent anti-icing performance, and good mechanical properties with a tensile strength of 1.