Enhanced Efficiency of Dye-Sensitized Solar Cells by Controlled Co-Adsorption Self-Assembly of Dyes.

Single dyes typically exhibit limited light absorption in dye-sensitized solar cells (DSSCs). Thus, cosensitization using two or more dyes to enhance light-harvesting efficiency has been explored; however, the aggregation of dyes can adversely affect electron injection capabilities. This study focused on the design and synthesis of three dyes with a common carbazole donor for DSSCs: , , and .

Indeno[3,2-]carbazole-Based Small Molecule Layer Enables Optimized Carrier Transport for PbS Quantum Dot NIR Photodetectors.

Colloidal quantum dots (CQDs) have garnered considerable attention for photodetectors (PDs), attributable to exceptional photoelectric properties and ease solution-based processing. However, the prevalent use of 1,2-ethanedithiol (EDT) as a hole transport layer (HTL) has limitations, such as energy level discrepancies, requisite oxidation, and intricate multilayer assembly. Organic p-type materials, lauded for their superior attributes and synthetic versatility, are now stepping forward as viable substitutes for conventional EDT HTLs.

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells.

Colloidal quantum dots (CQDs) are promising optoelectronic materials for solution-processed thin film optoelectronic devices. However, the large surface area with abundant surface defects of CQDs and trap-assisted non-radiative recombination losses at the interface between CQDs and charge-transport layer limit their optoelectronic performance. To address this issue, an interface heterojunction strategy is proposed to protect the CQDs interface by incorporating a thin layer of polyethyleneimine (PEIE) to suppress trap-assisted non-radiative recombination losses.

Merkel cell carcinoma overlapping Bowen's disease: two cases report and literature review.

Purpose: Merkel cell carcinoma (MCC) is a rare neuroendocrine tumor of the skin, which mainly occurs in the sun exposed sites of white patients over 65 years, with a higher recurrence and metastasis rate. Clinically, MCC overlapping Bowen's disease (BD) is a very rare subtype of MCC. Few cases in the literature have been described and the management is not well defined.

Organic hole transport materials for high performance PbS quantum dot solar cells.

We developed a triazatruxene-based hole transport material (HTM), 3Ka-DBT-3Ka, aiming to enhance band alignment and augment charge generation and collection in devices, as an alternative for 1,2-ethanedithiol (EDT). The PbS CQD solar cells employing 3Ka-DBT-3Ka as the HTM achieve a peak efficiency of 11.4%, surpassing devices employing the conventional PbS-EDT HTM (8.

Recurrent Skin and Soft Tissue Infections Caused by in an Immunocompromised Adult Patient: A Case Report.

is a normal commensal that colonizes the human genital tract and usually of low virulence; however, it can trigger serious extragenital infections in immunocompromised patient. In this case, a 48-year-old female immunocompromised patient with a four-year history of recurrent ulcer on extremities was presented to our hospital due to aggravation of lesions 10 months before. She was initially diagnosed as infection secondary to lupus panniculitis and slightly responded to ceftazidime treatment; however, a new rash appeared on her left hip 16 days after admission, which was aggravated even under antibiotic treatment.

Fatal Balamuthia mandrillaris infection with red plaques on the nasal dorsum as the first presentation.

Balamuthia mandrillaris infection is a rare infectious disease around the world, with high rates of morbidity and mortality. Its early and correct diagnosis is a big challenge for us, and without it the delay in starting effective treatment can lead to the development of encephalitis. This is a report of a case of Balamuthia mandrillaris infection in a Chinese boy, with red plaques on the nasal dorsum as the first presentation, who finally developed into fatal encephalitis.

Surface Defect Passivation and Energy Level Alignment Engineering with a Fluorine-Substituted Hole Transport Material for Efficient Perovskite Solar Cells.

The surface and boundary defects present in the perovskite film are reported to be nonradiative recombination and degradation centers, restricting further improvement of the power conversion efficiency (PCE) and long-term stability of perovskite solar cells. To address this problem, herein, we introduce a fluorine-substituted small molecular material 2FBTA-1 as a bifunctional buffer layer to efficiently passivate the surface defects of perovskite and tune the energy level alignment between the perovskite/2,2',7,7'-tetrakis(,-di-(-methoxyphenyl)amino)-9,9'-spirobifluorene (Spiro-OMeTAD) interface. X-ray photoelectron spectroscopy shows that with the insertion of 2FBTA-1 between perovskite and Spiro-OMeTAD, the metallic Pb defects and uncoordinated Pb defects are well restricted.

Fine-Tuning by Triple Bond of Carbazole Derivative Dyes to Obtain High Efficiency for Dye-Sensitized Solar Cells with Copper Electrolyte.

Three novel dyes consisting of a 5,8,15-(2-ethylhexyl)-8,15-dihydro-5-benzo[1,2-:3,4-':6,5-″]tricarbazole (BTC) electron-donating group and a 4,7-(4-hexylthiophen-2-yl)benzo[][1,2,5]thiadiazole (BTBT) π-bridge with an anchoring group of phenyl carboxyl acid were synthesized and applied in dye-sensitized solar cells (DSCs).The AJ202 did not contain any triple bonds, the AJ201's ethynyl group was inserted between the BTC and BTBT units, and the AJ206's ethynyl group was introduced between the BTBT moiety and the anchor group. The inclusion and position of the ethynyl linkage in the sensitizer molecules significantly altered the electrochemical properties of these dyes, which can fine-tune the energy levels of the dyes.

Twist1 Contributes to the Maintenance of Some Biological Properties of Dermal Papilla Cells by Forming a Complex With Tcf4 and β-Catenin.

Objective: During hair follicle regeneration, hair follicle stem cells (HFSCs) are regulated by signals from dermal papilla cells (DPCs). Previously we found that Tcf4 could promote the proliferation of DPCs. In this study, we focused on whether and how the biological properties of Tcf4-induced DPCs were regulated by Twist1.

Conformational and Compositional Tuning of Phenanthrocarbazole-Based Dopant-Free Hole-Transport Polymers Boosting the Performance of Perovskite Solar Cells.

Conjugated polymers are regarded as promising candidates for dopant-free hole-transport materials (HTMs) in efficient and stable perovskite solar cells (PSCs). Thus far, the vast majority of polymeric HTMs feature structurally complicated benzo[1,2-:4,5-']dithiophene (BDT) analogs and electron-withdrawing heterocycles, forming a strong donor-acceptor (D-A) structure. Herein, a new class of phenanthrocarbazole ()-based polymeric HTMs (, , and ) has been synthesized by inserting a unit into a polymeric thiophene or selenophene chain with the aim of enhancing the π-π stacking of adjacent polymer chains and also to efficiently interact with the perovskite surface through the broad and planar conjugated backbone of the .

Tumor with slow-developing and recurring lumps of the external ear with skull base and lung metastasis: A case report.

The present case report describes a rare case of recurring lumps on the external ear in a 46-year-old Chinese male with a history of >10 years, who presented with large irregular red lumps on the right temple and with lung and skull base metastasis. The patient had a lesion in the right auricle and experienced recurrence following surgical resection. A thorough systemic evaluation revealed no other obvious abnormalities.

Effect of fluorine substituents on benzothiadiazole-based D-π-A'-π-A photosensitizers for dye-sensitized solar cells.

Two D-π-A'-π-A organic dyes with triazatruxene (TAT) as the electron donor, thiophene as the π-spacer, benzoic acid as the anchor group, and benzothiadiazole (BT) or difluorobenzo[][1,2,5]thiadiazole (DFBT) as the additional acceptor, namely LS101 and LS102, respectively, were applied to dye-sensitized solar cells (DSSCs). As fluorine substituents are usually strong electron-withdrawing groups, introducing two fluorine atoms into BT was expected to strengthen the electron-withdrawing ability of the auxiliary acceptor, resulting in DSSCs with a broader light capture region and further improved power conversion efficiency (PCE). Fluorine is the smallest electron-withdrawing group with an induction effect, but can also act as an electron-donating group owing to its conjugation effect.

Characterization of TCF4-mediated oncogenic role in cutaneous squamous cell carcinoma.

The aberrant highly expressed T-cell factor 4 (TCF4) has been determined to be closely connected with carcinogenesis of cutaneous squamous cell carcinoma (cSCC) in previous studies. However, the underlying regulatory network and the potential therapeutic targets of TCF4 in SCC are still not fully understood. In this study, the highly expressed TCF4 was observed in human cSCC cancer compared to the paired adjacent tissues.

Polymeric, Cost-Effective, Dopant-Free Hole Transport Materials for Efficient and Stable Perovskite Solar Cells.

Perovskite solar cells (PSCs) has skyrocketed in the past decade to an unprecedented level due to their outstanding photoelectric properties and facile processability. However, the utilization of expensive hole transport materials (HTMs) and the inevitable instability instigated by the deliquescent dopants represent major concerns hindering further commercialization. Here, a series of low-cost, conjugated polymers are designed and applied as dopant-free HTMs in PSCs, featuring tuned energy levels, good temperature and humidity resistivity, and excellent photoelectric properties.

Analysis and optimization of alloyed Al-p region and rear contacts for highly efficient industrial n-type silicon solar cells.

This paper aims to develop high quality screen-printed Al emitters and improve the interface condition of rear contacts in industrial silicon solar cells. We propose to introduce an ultra-thin SiO buffer layer between the silicon bulk and metal contact during the fabrication process. A post-annealing strategy is adapted to further modify the Al doping profiles.

Efficient and Stable Dye-Sensitized Solar Cells Based on a Tetradentate Copper(II/I) Redox Mediator.

The identification of an efficient and stable redox mediator is of paramount importance for commercialization of dye-sensitized solar cells (DSCs). Herein, we report a new class of copper complexes containing diamine-dipyridine tetradentate ligands (L1 = N, N'-dibenzyl- N, N'-bis(pyridin-2-ylmethyl)ethylenediamine; L2 = N, N'-dibenzyl- N, N'-bis(6-methylpyridin-2-ylmethyl)ethylenediamine) as redox mediators in DSCs. Devices constructed with [Cu(L2)] redox couple afford an impressive power conversion efficiency (PCE) of 9.

Author Correction: MAD2B acts as a negative regulatory partner of TCF4 on proliferation in human dermal papilla cells.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Disseminated nocardiosis caused by Nocardia elegans: a case report and review of the literature.

Background: Disseminated nocardiosis is a rare disease mostly occurring in immunocompromised patients.

Methods: We report a case of disseminated nocardiosis in a diabetic patient with both pulmonary and cutaneous involvement. Nocardia elegans was isolated and identified using the 16s ribosomal RNA gene sequence data.

MAD2B acts as a negative regulatory partner of TCF4 on proliferation in human dermal papilla cells.

Dermal papilla cells (DPCs) are important components of hair follicles and play a critical role in hair follicle development. However, the mechanisms by which DPCs induce hair follicle development remain unclear. In the present study, we identified the mitotic arrest deficient protein MAD2B as a modifier of DPCs.

High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material.

Herein, we successfully applied a facile in-situ solid-state synthesis of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a HTM, directly on top of the perovskite layer, in conventional mesoscopic perovskite solar cells (PSCs) (n-i-p structure). The fabrication of the PEDOT film only involved a very simple in-situ solid-state polymerisation step from a monomer 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) made from a commercially available and cheap starting material. The ultraviolet photoelectron spectroscopy (UPS) demonstrated that the as-prepared PEDOT film possesses the highest occupied molecular orbital (HOMO) energy level of -5.

Interfacial Engineering of Perovskite Solar Cells by Employing a Hydrophobic Copper Phthalocyanine Derivative as Hole-Transporting Material with Improved Performance and Stability.

In high-performance perovskite solar cells (PSCs), hole-transporting materials (HTMs) play an important role in extracting and transporting the photo-generated holes from the perovskite absorber to the cathode, thus reducing unwanted recombination losses and enhancing the photovoltaic performance. Herein, solution-processable tetra-4-(bis(4-tert-butylphenyl)amino)phenoxy-substituted copper phthalocyanine (CuPc-OTPAtBu) was synthesized and explored as a HTM in PSCs. The optical, electrochemical, and thermal properties were fully characterized for this organic metal complex.

Perception and Acceptability of Medical Photography in Chinese Dermatologic Patients: A Questionnaire Survey.

Background: Medical photography is increasingly used by physicians, but studies assessing the perception and acceptability of medical photography by Chinese dermatologic patients are scarce.

Objective: To assess the perception and acceptability of medical photography in Chinese dermatologic patients.

Materials And Methods: From July to December 2014, adult patients visiting the Dermatology Clinic of The First Affiliated Hospital of Third Military Medical University were included in this study.