High-sensitivity temperature sensor based on anti-resonance in high-index polymer-coated optical fiber interferometers.

Compared to the multimode interference (MMI) effect, the anti-resonance (AR) effect does not rely on the multimode property of the optical waveguide. This Letter shows that fiber bending can suppress the MMI and can break the superposition of AR spectra of multiple modes in a high-index polymer-coated optical fiber interferometer based on a single-mode fiber-polymer-coated no-core fiber-single-mode fiber hetero-structure. This results in the dominance of the AR spectrum of an individual mode and consequently in periodic sharp transmission dips.

Anti-resonance, inhibited coupling and mode transition in depressed core fibers.

The depressed core fiber (DCF), consisting of a low-index solid core, a high-index cladding and air surrounding, is in effect a bridge between the conventional step-index fiber and the tube-type hollow-core fiber from the point of view of the index profile. In this paper the dispersion diagram of a DCF is obtained by solving the full-vector eigenvalue equations and analyzed using the theory of anti-resonant and the inhibited coupling mechanisms. While light propagation in tube-type hollow-core fibers is commonly described by the symmetric planar waveguide model, here we propose an asymmetric planar waveguide for the DCFs in an anti-resonant reflecting optical waveguide (ARROW) model.

Microfluidic flow direction and rate vector sensor based on a partially gold-coated TFBG.

In microfluidic chips applications, the monitoring of the rate and the direction of a microfluidic flow is very important. Here, we demonstrate a liquid flow rate and a direction sensor using a partially gold-coated tilted fiber Bragg grating (TFBG) as the sensing element. Wavelength shifts and amplitude changes of the TFBG transmission resonances in the near infrared reveal the direction of the liquid flowing along the fiber axis in the vicinity of the TFBG due to a nanoscale gold layer over part of the TFBG.

Optical spectral sweep comb liquid flow rate sensor.

In microfluidic chip applications, the flow rate plays an important role. Here we propose a simple liquid flow rate sensor by using a tilted fiber Bragg grating (TFBG) as the sensing element. As the water flows in the vicinity of the TFBG along the fiber axis direction, the TFBG's spectrum changes due to its contact with water.

Measurements of milli-Newton surface tension forces with tilted fiber Bragg gratings.

Small lateral forces (lower than 0.1 N) cannot normally be measured with conventional single-mode fiber-based sensors because of the high value of their Young modulus (>70  GPa). Here we demonstrate the measurement of lateral forces in the range from 0.