Polyethyleneimine-assisted one-pot synthesis of Au nanodendrites on carbon nanotube sheet as an efficient SERS substrate.

A polyethyleneimine (PEI)-assisted simple and efficient one-pot hydrothermal reduction method is reported to prepare high-quality gold nanodendrites (AuNDs) on a carbon nanotube (CNT) sheet. We observed that the prepared AuNDs have a well-defined backbone-multiple branching structure. With the systematical investigation of the growth mechanism, it was found that the bromide (Br) ion concentration has an essential effect on the formation of AuNDs.

Preparation and Properties of Sulfur-Modified Alite Calcium Sulfoaluminate Cement.

Alite calcium sulfoaluminate (ACSA) cement is an innovative and environmentally friendly cement compared to ordinary Portland cement (OPC). The synthesis and hydration of ACSA clinkers doped with gradient sulfur were investigated. The clinker compositions and hydrated pastes were characterized by X-ray diffraction (XRD), isothermal calorimetry, mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) to analyze its mineral contents, hydration products, heat release, pore structure, and microstructure.

Conductive polyacrylamide/pullulan/ammonium sulfate hydrogels with high toughness, low-hysteresis and tissue-like modulus as flexible strain sensors.

Conductive hydrogels have great potential for applications in flexible wearable sensors due to the combination of biocompatibility, mechanical flexibility and electrical conductivity. However, constructing conductive hydrogels with high toughness, low hysteresis and skin-like modulus simultaneously remains challenging. In the present study, we prepared a tough and conductive polyacrylamide/pullulan/ammonium sulfate hydrogel with a semi-interpenetrating network.

An automatic end-to-end chemical synthesis development platform powered by large language models.

The rapid emergence of large language model (LLM) technology presents promising opportunities to facilitate the development of synthetic reactions. In this work, we leveraged the power of GPT-4 to build an LLM-based reaction development framework (LLM-RDF) to handle fundamental tasks involved throughout the chemical synthesis development. LLM-RDF comprises six specialized LLM-based agents, including Literature Scouter, Experiment Designer, Hardware Executor, Spectrum Analyzer, Separation Instructor, and Result Interpreter, which are pre-prompted to accomplish the designated tasks.

Boosting the Structural and Electrochemical Stability of Chloride-Ion-Conducting Perovskite Solid Electrolytes by Alkali Ion Doping.

The use of chloride-based solid electrolytes derived from Lewis acid‒base reactions enables the construction of various new rechargeable batteries, such as chloride ion batteries (CIBs). However, a critical problem with these electrolytes is their poor stability under low-temperature, moist, or electrochemical conditions, which can lead to deterioration of the phase structure and a loss of ion conduction. Herein, the robust cubic structure of tin-based perovskite chloride-a chloride ion conductor-is achieved by alkali ion doping at the tin site via direct mechanical milling.

Metal-Organic Framework and Covalent-Organic Framework-Based Aerogels: Synthesis, Functionality, and Applications.

Metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs)-based aerogels are garnering significant attention owing to their unique chemical and structural properties. These materials harmoniously combine the advantages of MOFs and COFs-such as high surface area, customizable porosity, and varied chemical functionality-with the lightweight and structured porosity characteristic of aerogels. This combination opens up new avenues for advanced applications in fields where material efficiency and enhanced functionality are critical.

6-Hydroxy Picolinohydrazides Promoted Cu(I)-Catalyzed Hydroxylation Reaction in Water: Machine-Learning Accelerated Ligands Design and Reaction Optimization.

Hydroxylated (hetero)arenes are privileged motifs in natural products, materials, small-molecule pharmaceuticals and serve as versatile intermediates in synthetic organic chemistry. Herein, we report an efficient Cu(I)/6-hydroxy picolinohydrazide-catalyzed hydroxylation reaction of (hetero)aryl halides (Br, Cl) in water. By establishing machine learning (ML) models, the design of ligands and optimization of reaction conditions were effectively accelerated.

Impact of Lime Saturation Factor on Alite-Ye'Elimite Cement Synthesis and Hydration.

Alite(CS)-Ye'elimite(CA$) cement is a high cementitious material that incorporates a precise proportion of ye'elimite into the ordinary Portland cement. The synthesis and hydration behavior of Alite-Ye'elimite clinker with different lime saturation factors were investigated. The clinkers were synthesized using a secondary thermal treatment process, and their compositions were characterized.

Ag Nanoparticles Deposited onto BaTiO Aerogel for Highly Efficient Photodegradation.

Given the increasingly severe environmental problems caused by water pollution, the degradation of organic dyes can be effectively achieved through the utilization of photocatalysis. In this work, metal alkoxides and a combination of alcohol/hydrophobic solvents are employed to prepare BaTiO aerogels via a liquid-phase and template-free synthetic route. The preparation process of the aerogels solely entails facile agitation and supercritical drying, eliminating the need for additional heat treatment.

Multifunctional Phosphor with High-Efficient Near-Infrared Emission Based on Antimony-Zinc Halides.

Metal halide-based broadband near-infrared (NIR) luminescent materials face problems such as complicated preparation, high cost, low photoluminescence quantum yield, and high excitation energy. Here, incorporating Sb and Br into (CHP)ZnCl crystals allowed for the achievement of efficient broadband near-infrared emission under 400 nm excitation while maintaining satisfactory environmental and thermal stability. The compounds exhibit a broad range of emission bands from 550 to 1050 nm, with a photoluminescence quantum yield of 93.

Ag-Incorporated Cr-Doped BaTiO Aerogel toward Enhanced Photocatalytic Degradation of Methyl Orange.

A novel Cr-doped BaTiO aerogel was successfully synthesized using a co-gelation technique that involves two metallic alkoxides and a supercritical drying method. This freshly prepared aerogel has a high specific surface area of over 100 m/g and exhibits improved responsiveness to the simulated sunlight spectrum. Methyl orange (MO) was chosen as the simulated pollutant, and the results reveal that the Cr-doped BaTiO aerogel, when modified with the noble metal silver (Ag), achieves a pollutant removal rate approximately 3.

Use of Ball Drop Casting and Surface Modification for the Development of Amine-Functionalized Silica Aerogel Globules for Dynamic and Efficient Direct Air Capture.

Amine-functionalized silica aerogel globules (AFSAGs) were first synthesized via a simple ball drop casting method followed by amine grafting. The effect of grafting time on the structure and CO adsorption performance of the AFSAGs was investigated. The CO adsorption performance was comprehensively studied by breakthrough curves, adsorption capacity and rates, surface amine loading and density, amine efficiency, adsorption halftime, and cyclic stability.

Quantitative Analysis of the Physical Properties of Ti6Al4V Powders Used in a Powder Bed Fusion Based on 3D X-ray Computed Tomography Images.

The physical properties of Ti6Al4V powder affect the spreadability of the powder and uniformity of the powder bed, which had a great impact on the performance of built parts made by powder bed fusion technology. Micro-computed tomography is a well-established technique used to analyze the non-destructivity of the objects' interior. Ti6Al4V powders were scanned with micro-CT to show the internal and external information of all the particles.

Nano-energy interference: A novel strategy for blunting tumor adaptation and metastasis.

Blunting the tumor's stress-sensing ability is an effective strategy for controlling tumor adaptive survival and metastasis. Here, we have designed a cyclically amplified nano-energy interference device based on lipid nanoparticles (LNP), focused on altering cellular energy metabolism. This innovative nano device efficiently targets and monitors the tumor's status while simultaneously inhibiting mitochondrial respiration, biogenesis and ribosome production.

Effect of Hatch Spacing on the Quality of Inconel 718 Alloy Part.

Selective laser melting (SLM) has attracted increasing attention all over the world. As an important parameter, hatch spacing, which is the distance between scan lines, however, still needs a more systematic study. In this paper, the relationship between hatch spacing and mechanical properties, including microhardness, wear resistance, and porous density, was studied.

Sb-Doped Indium-Based Metal Halide (Gua)InCl with Efficient Yellow Emission.

In recent years, low-dimensional organic-inorganic hybrid metal halides (OIHMHs) have shown excellent photophysical properties due to their quantum structure, adjustable energy levels, and energy transfer between inorganic and organic components, which have attracted extensive attention from researchers. Herein, we synthesize a zero-dimensional (0D) OIHMH, Sb:(Gua)InCl, by introducing Sb into (Gua)InCl, which undergoes a significant enhancement of the emission peak at 580 nm with the photoluminescence quantum yield (PLQY) boosted from 17.86 to 95.

Discontinuous Dissolution Mechanism of Olivine Deduced from a Topography Observation Method.

Olivine dissolution plays an important role in environmental science and technology, from controlling global element circulation to carbon capture for climate change mitigation. Most studies have been focused on investigating its dissolution rates by monitoring chemical effluent changes under various conditions. However, only by observation of surface reactivity can we unravel the actual mechanism (s) of dissolution.

Modulating Electronic Structure and Atomic Insights into the Novel Hierarchically Porous PdCuFe Trimetallic Alloy Aerogel for Efficient Oxygen Reduction.

The high cost of noble Pd/Pt required for the oxygen reduction reaction (ORR) in the cathode restricts the wide applications of fuel cells. In this study, the synthesis of a novel PdCuFe aerogel electrocatalyst is successfully demonstrated using self-assembly and lyophilization techniques, employing a mild reducing agent. The resulting aerogel electrocatalyst exhibits a distinctive 3D network structure, possessing a substantial BET-specific surface area of 75.

Bismuth and Chlorine Dual-Doped Perovskite Chloride as a Phase-Structure-Stable and Moisture-Resistant Solid Electrolyte for Chloride Ion Batteries.

Perovskite chloride, an anion conductor, is a promising candidate to be a solid electrolyte for high-energy and sustainable chloride ion batteries (CIB). However, it suffers from poor structural stability at low temperature and in ambient conditions, which leads to its transformation from an ionic conductor to an insulator. Herein, a bismuth and chlorine dual doping strategy is developed to stabilize the cubic structure of CsSnCl in harsh environments.

The functions and applications of extracellular vesicles derived from Mycobacterium tuberculosis.

Extracellular vesicles (EVs) originating from bacteria function critical roles in bacterial biologic physiology and host-pathogen interactions. Mycobacterium tuberculosis (M. tuberculosis) produces EVs both in vitro and in vivo, with membrane-bound nanoparticles facilitating the transmission of biological molecules including lipids, proteins, nucleic acids and glycolipids, while interacting remotely with the host.

Advances in the Preparation of Tough Conductive Hydrogels for Flexible Sensors.

The rapid development of tough conductive hydrogels has led to considerable progress in the fields of tissue engineering, soft robots, flexible electronics, etc. Compared to other kinds of traditional sensing materials, tough conductive hydrogels have advantages in flexibility, stretchability and biocompatibility due to their biological structures. Numerous hydrogel flexible sensors have been developed based on specific demands for practical applications.

Ultra-stretchable and conductive polyacrylamide/carboxymethyl chitosan composite hydrogels with low modulus and fast self-recoverability as flexible strain sensors.

There is a great demand for the fabrication of soft electronics using hydrogels due to their biomimetic structures and good flexibility. However, conventional hydrogels have poor mechanical properties, which restricts their applications as stretchable sensors. Herein, a facile one-step strategy is proposed to fabricate tough and conductive hydrogels by making use of the graftability of carboxymethyl chitosan without extra conductive matter and crosslinking agent.

Facile Synthesis of Polymer-Reinforced Silica Aerogel Microspheres as Robust, Hydrophobic and Recyclable Sorbents for Oil Removal from Water.

With the rapid development of industry and the acceleration of urbanization, oil pollution has caused serious damage to water, and its treatment has always been a research hotspot. Compared with traditional adsorption materials, aerogel has the advantages of light weight, large adsorption capacity and high selective adsorption, features that render it ideal as a high-performance sorbent for water treatment. The objective of this research was to develop novel hydrophobic polymer-reinforced silica aerogel microspheres (RSAMs) with water glass as the precursor, aminopropyltriethoxysilane as the modifier, and styrene as the crosslinker for oil removal from water.

Diagnosis and treatment of biliary mucinous cystic neoplasms: A single-center experience.

Background: Biliary mucinous cystic neoplasms (BMCNs) are rare hepatobiliary cystic tumors, which can be divided into noninvasive and invasive types. This study aimed to investigate the diagnosis, treatment, and prognosis of BMCNs in a large single center.

Methods: We analyzed 49 patients with BMCNs confirmed by postoperative pathology at the First Affiliated Hospital, Zhejiang University School of Medicine between January 2007 and December 2021.